cruise control question

[Gus The Snail]

do base model utes have provision in the wiring for cruise to be added? without modification?

[Gus The Snail]

well seems as no-one was able to answer my question.. i bought cruise.. it plugs straight in ( as the loom is already there in the wiring ) , but should it turn on when the car is stopped and idling? or do i have to be driving to test if it works?

[VZTHUNDER]

holdens sell a kit mate
includes everything
including wiring incase u dont have it already
by the looks of ur posts all youd need is the stalk and the actuator
youd need to be moving to test it mate

[Gus The Snail]

got the underbonnet unit , and have installed the stalk on the column , guess i'll go for a drive today and see what happens

[shaggerz]

factory cruise control will "enable" at a standstill when you push "cruise on/off" on the stalk, but will not SET (i.e. hold speed) unless you are doing over 40kmh

[Garth]

got the underbonnet unit , and have installed the stalk on the column , guess i'll go for a drive today and see what happens

it wont work, the ute bcm is a low series bcm. 2 wires are not matching in the ute bcm, i know this cause im curently sorting out that issue myself in my ute.

[Gus The Snail]

heya garth... well i got it working today.

I got a series 2 stalk , and underbonnet unit , also a few relay thingys that go under the dash , the switch for the brake pedal , and a sports dash with the right lights on it... all plugged in and went for a rive.. everything worked , speed up , speed down.. auto turn off on application of brake pedal ( fit fine.. drop a hair on the pedal and it turns off ).

now to fit the LSD , and fix the air con.. then its paint time