my mechanic still has my service book... can someone tell me what type of bulb to use in my VZ ute. ive got a revese light out
i think it is a 1156 (or equivelent)
just a standard 12v 21w incadescent as in this one Add to Cart
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
reverse should be a 47382(narva number), which is an 1156 single filament 21w globe. has it got 2 pins on the bottom or one? i know vn-vs utes and wagons all used a stop/tail twin filament globe in brake, reverse and indicators in the rear, dunno if they changed it to single filament for reverse and indicator for the vt/vu onwards
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
i was thinkingof that. i put white LEDs in the park lights and am putting orange ones in the indicators (cos they look crap with the orange bulb behind them.
do they make much of a difference, can you see more when you are reversing?
You don't need to see anything while reversing, thats what your tailgate is for
Chuck Norris destroyed the periodic table, because he only recognizes the element of surprise
thats all good and well until you back into something smaller then the tailgate
in the day...no :P
but at night, i've found it easier to spot things, it doesnt really light the ground up as much as a normal bulb, but if something is in the way or is close (within say 3m) it lights it up pretty good. didnt really test before and after, have a look at my vid in my ride section it you want to see how bright they are![]()
damn, why did i look at that??
have you got a 3/4 rear shot with the black tail lights. after seeing them i am starting to think that i need a set.
were they just a straight swap? and did they bugger up your cruise control?
Hows that?
Yep straight swap 4 bolts after you take the rear panel off, haven’t seen a black ute with these lights going around, seen them on a red one but it looked a bit weird.
Had no problem with the cruise control, a couple of people have asked me that for some reason?
Bought the LED globes of eBay. But I bought the wrong ones, the pins weren’t in the right position but it doesn’t affect performance, check your bulbs first before getting them to make sure you get the right ones. I drove around with the normal bulbs in for a couple of weeks after getting them but I wanted the whole rear end to be LED.
Only problem with changing the indicator bulbs over to LED is that the relay thinks that the bulbs are blown, they will flash but really quickly. I had to get a hella LED flasher relay that allows me to run any combination of LED and normal bulbs. Even all LED and not have to change the relay. $60 for the relay so it’s a bit steep, but when I want something
EDIT: You need deep sockets to remove the taillights, well its not critical, just makes it easier
i may have to invest in a set.. i like them!
reason ive asked about cruise is cos i read on a forum that cruise switches off when it sense the brake lights on (i think).
whats the deal with the LED flashed relay, what is it and how does it work? is it just a standard relay that replaces the existing one?
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
Switches, Flashers, Relay & Horns
top one, 68245, works a treat in the vp, $25-30, just removes the blown indicator detection, so you'll have to check your globes once in a while, but being all led, should be fine for a long time
Do you mean when you have cruise control on and you press the brake and the cruise control switches off? isnt it suppost to do that?
It makes the LED's flash normal. In stead of a normal flasher relay thinking it needs for example 5 watts to each rear light it just searches for any, because LED's draw such little power. i can get you the part number if you likeYeah its a straight swap and go item. the auto elecy guy said it was a digital replacement rather then a mechanical one
I have those Black lights on my red VU. It looks much better than the factory ones I had on there. Oh and thanks guys, I now know why my cruise control hasn't been working of late.
When the going gets weird, the weird turn pro.
not yet. i want to get one. ive got a mate who owes me 100 bucks, and i have a cash job i need to get paid for... so i was thinking of giving my ute a rear end treatment with the money
i should also atleast get a decent looking exhaust tip too
Well all up it cost me $190 for the lights of ebay (delivered) about $25 for the bulbs delivered and $75 for the relay which you can get cheaper, so no more then $235 for the lights for exactly the same setup i have.
Get a dual dumped tipmate of mine just put some on his car, except he's running dual exits with dual dumped tips, they suit the car
![]()
i am a few days away from ordering a set.. im just waiting on confirmation from someone to buy my old ones. im also thinking of getting an infill panel. and tips. not a full exhaust, cos i cant afford it.. just something to fill the hole up.
hopefully ill be able to have all that done before the JC ACT/NSW cruise to bathurst!
i also (finally) got the chrome bezels for the calais front bumper, so now the front end looks complete. all i need to do is wash it and put the wheels back on and it will look like a new car!