flywheel resurfacing

[one_and_only2004]

i just picked myself up a free lightened solid flywheel + clutch plate + pressure plate from a friend, but they both have had their faces pretty worn to the extent that there's some pretty impressive grooves worked into them.
What sort of places are out there that could do this for me?

[hail storm]

The fly wheel can be done at any Good Engineering shops.As for the pressure plate,just give it a de-glase with some 180 grit wet & dry sandpaper.

[Jared91]

i see your feet!

[social]

im also quite interested in how to resurface the flywheel, can it be done by hand with wetsand paper?

[delcowizzid]

ditch the pressure plate and get a new one and off to the engine builders with the flywheel wont cost much to skim it off if there is enough meat left on it after its been lightened before

[Zuicider]

there is a few ways to redo the face, surface grinding and if the grooves are too deep for your liking get them puffer welded

[one_and_only2004]

Thanks guys, i think i have to get it sent away as noone in town does it. I'm up at the gold coast this weekend/monday/tuesday so i'll have a look around there.

[VT-565]

there is a few ways to redo the face, surface grinding and if the grooves are too deep for your liking get them puffer welded

Machine finish should be fine.


By the way, WTF is 'puffer welding'? is there something i should know?