So im thinking of buying some 2nd hand calais seats
If I took out the rear seats and passenger seat would i be able to fit , The second hand drivers, passenger and rear seat in the car to take them home?
And i cant take a trailer as im on Red P's![]()
just take out rear seat put the rearin and the others will fit. I put a whole interior in my vh without removing seats
Originally Posted by Smidy
yup, that's the way ^_^ Take out the rear seats before you get there, fit on arrival.
You CAN fit all four into the one car. If you clear out the boot, both front seats can JUST squeeze in there. Then the back seats can go on the back seats.![]()
__________________________________________________
The 1972 HQ Kingswood
The 1989 VN Turbo Rally Project
__________________________________________________
I think im going to play a few rounds of tetris before i pick them up to get my space management up. But thanks for the info
![]()
I done this before in a vp , wind each seat flat then stack the opossite to each other in the back with your seat out ,the back seat base squeazes in the boot once the spare is out but its tigth, and then you put the upper part of the back in the as well
Im pretty sure I still found room for my spare somewhere too
hope you havnt got any subs in the boot. Id agree with whats been said, leave your rear seat at home and fit the new one when you get there. and id guess 1 seat would fit on the back and 1 in the boot
as most of the above have said..
remove ur rear seats before pick up leave your original seats in, oh and take some cardboard!! u'll be amazed at how much road noise u cop without the seats in the car. fit the rears on arival, then for the fronts ur picking up. wind them so they are flat, and place 1 of the seats front facing down on the rear seat. then place cardboard ontop of the rails and back part, and the second seat with the front facing up with the rails of each seat resting against the back part. wind ur passenger seat back as a stopper. job done
speaking from experience![]()
No need to remove a thing just wind the seats flat as they will go and shove em in the back.I got front and rear seats and door trims into a VP.Just need some clever thinking.