Results 1 to 10 of 10

Thread: Pricing please.

  1. #1
    Ride
    1998 Mercedes Vito 113

    Join Date
    Oct 2009
    Location
    S.E VIC
    Posts
    885

    Default Pricing please.

    Hey GSL,

    Can I please get a PM for a quote on the Police spec brake pads + Slotted rotors both for front and rear?

    Give me pricings on your cheapest but decent ones, and the next few models up if you have them please

    My brakes are starting to squeel, and so I need new pads, the brakes are pretty weak especially with 20's..

    Thanks


    Quote Originally Posted by perkoracin
    it like u pull at to a red light and they go o its that fag from just Commodores and it like u go tohe drags and ur car runs a like a 9 sec run as a eg and theres run a low 14 um i would Lol so hard like Epicly and then call them The Internet Mouthers and no go Lol thats a eg they might have Fast as rides 2 but may not sound as a Nice small block chevy with a Supercharger on it lol.

    Click here for my old VY Commodore!


  2. #2
    Ride
    VY S pack & VP ute

    Join Date
    Jun 2008
    Posts
    36

    Default

    hi there i am also looking at getting new front and rear disc's and pads

    can i also get a price for standard rotors rear and slotted front, also a price for standard front please

    this is for a VY also thanks

    posted to 3240


    thanks mate
    Quote Originally Posted by bang_chong View Post
    Hey guys just was wondering if you could help me out with the name of the part i need? Its the plastic T piece that is used as a vacuum line
    Quote Originally Posted by Nackerz View Post
    pretty sure its just called a t piece mate

  3. #3
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,783

    Default

    Quote Originally Posted by DevilDRake View Post
    Hey GSL,

    Can I please get a PM for a quote on the Police spec brake pads + Slotted rotors both for front and rear?

    Give me pricings on your cheapest but decent ones, and the next few models up if you have them please

    My brakes are starting to squeel, and so I need new pads, the brakes are pretty weak especially with 20's..

    Thanks
    Hi mate,

    Remsa full face police spec pads are $89 for the front, and $79 for the rear.

    Cheapest rotors would be RDA slotted, which are $165 for the front pair, and $149 for the rear pair.

    Some half decent would be DBA Street Series Slotted rotors which are $99 per rotor front or rear.

    A top end rotor, and Australian made, would be DBA 4000 Series Slotted which are $148.50 per rotor.

    The fluid that we use and recommend is the TRW GP600 Dot 4 Racing Brake Fluid, which is $65 for a 1L bottle, and rated to 312 degrees dry.

    Any other questions just let me know!

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  4. #4
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,783

    Default

    Quote Originally Posted by drippy View Post
    hi there i am also looking at getting new front and rear disc's and pads

    can i also get a price for standard rotors rear and slotted front, also a price for standard front please

    this is for a VY also thanks

    posted to 3240


    thanks mate
    Hi mate,

    As per above, with the addition of:
    Standard Front Rotors: RDA $39 each, DBA Street Series $52.58 each
    Standard Rear Rotors: RDA $35 each, DBA Street Series $49.84 each

    Shipping to 3240 $22.

    Any other questions just let me know!

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  5. #5
    Ride
    VY Clubsport R8

    Join Date
    Sep 2010
    Location
    Sydney
    Posts
    456

    Default

    That's a good price for the 4000 series, is that for front and rear?

    Can you quote me for 4000 series slotted front and rear with QFM HPX pads front and rear shipped to 2234?

  6. #6
    Ride
    1998 Mercedes Vito 113

    Join Date
    Oct 2009
    Location
    S.E VIC
    Posts
    885

    Default

    Without me upgrading my hubs will the pads still have good effect? (only thing that turned me off is CBF re-bleeding the brake fluid lol


    Quote Originally Posted by perkoracin
    it like u pull at to a red light and they go o its that fag from just Commodores and it like u go tohe drags and ur car runs a like a 9 sec run as a eg and theres run a low 14 um i would Lol so hard like Epicly and then call them The Internet Mouthers and no go Lol thats a eg they might have Fast as rides 2 but may not sound as a Nice small block chevy with a Supercharger on it lol.

    Click here for my old VY Commodore!


  7. #7
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,783

    Default

    Hi mate,

    Apologies about the late reply! Anything urgent always best to call.

    Quote Originally Posted by mzak89 View Post
    That's a good price for the 4000 series, is that for front and rear?
    Same price, both $148.50 per rotor.

    Can you quote me for 4000 series slotted front and rear with QFM HPX pads front and rear shipped to 2234?
    All up would be $767, or $777 with Remsa pads.

    Any other questions just let me know!

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  8. #8
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,783

    Default

    Quote Originally Posted by DevilDRake View Post
    Without me upgrading my hubs will the pads still have good effect? (only thing that turned me off is CBF re-bleeding the brake fluid lol
    Huh? Not sure I know what you mean.

    You can replace both pad and rotors without bleeding the brakes, but keep in mind, that the first weakness, in nearly every car on the road is fluid, not pads or rotors.
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  9. #9
    Ride
    VE S2 SV6/A6

    Join Date
    Apr 2011
    Location
    Sydney
    Posts
    229

    Default

    Hey Greg,

    Wasn't sure where to place this post but thank you for the quick delivery. Pads arrived to my office in Sydney less than 4 hours after I ordered and paid for them.

    Thanks for the speedy delivery, I have a job to do tomorrow now
    Current Ride: 2011 VE Sedan - In Voodoo of course.
    Last Ride: 2004 Subaru Liberty GT, Twin scroll turbo, tuned, Bilsteins, sway bars, no rice, 420Nm
    Also Own: 1964 EH Wagon, modified interior, minor modifications outside

  10. #10
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,783

    Default

    Thanks mate, no dramas at all, speak soon!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

Similar Threads

  1. Help with Pricing my car
    By Penguin360 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 12
    Last Post: 10-07-2010, 06:52 PM
  2. VN/VR Parts Pricing Help Please (WA)
    By Curley327 in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 0
    Last Post: 29-04-2010, 01:50 PM
  3. pricing rip off?
    By Oh_Your_Blind in forum Car Audio
    Replies: 18
    Last Post: 13-11-2009, 07:17 PM
  4. Rim Pricing
    By jester419 in forum General
    Replies: 2
    Last Post: 04-06-2008, 08:10 PM
  5. Help In Pricing Of A Car . . . . .
    By wadeson88 in forum General
    Replies: 13
    Last Post: 03-12-2007, 06:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71