QFM Brake Pads

[bjr250]

I am after a price for front and rear HPX pads and front slotted and standard rear rotors. I am in Taringa 4068. (PM also sent).

[gslrallysport]

Hi Brad,

Front and rear HPX pads (full face police spec fronts), front slotted rotor, and rear standard rotors will set you back $427 delivered.

Regards,
Greg

[gslrallysport]

More news just in!!!

Just a quick update. Went to Winton over the long weekend with a set of QFM A1RM's which performed outstandingly. The GTiR has very average brakes to begin with which normally fit inside a 14" rim. But the pads (with std rotors) performed extremely well with no fade. Was literlly off my seat slightly standing on the brakes at the end of the straight.

PerformanceForums - View Single Post - which pads

[BOY1236]

ok just checking again

I'm looking for front\ rear pads for the VE SS (best one there is)

if you can include shipping price to Saudi Arabia, with the price in US$ that will be great

thanks

[gslrallysport]

PM Sent!

[gslrallysport]

A1RM fitted to WRX!

I did an AHG tuning arvo on the 24th April and I was in need of some decent pads but as ever money and time came in to the choices of what was available.

I know DS2500 are the usual route to take however I found the pricing of what was available in Perth rather hard to swallow and the interstate postage some people wanted to charge was scandalous so I began to search around for the alternatives and came across GSL Rallysport and the QFM pads....at the time they were even running a half price rears and free delivery offer.

So I placed an order for their A1RM track pads, they had sold out of WRX pads because of the special offer however I was assured that because of the trackday booking my order was priority and I would get my pads on time and at the special offer price. Emails and calls were returned very quickly which was a refreshing change.

As promised my pads were delivered to my place of work on time and I fitted them that night.

Out on the road they felt good from brand new. I gave them half a dozen 80-20kmh 'slows' and they immediately firmed up and they started biting hard. They did not need any more running in.

Under normal driving conditions they feel just like the stock Subaru pads, no squeeling, juddering, grinding and they work just like a stock pad from cold.

On the trackday they worked brillinatly. First corner they worked straight away...by the second and third corners I could really lean on them. We were running 2 laps at a time on the circuit and they did not fade at all or even begin to smell like they were getting hot.

On the skid pan where you are only jabbing the brakes and not building any heat in them they still worked exactly as you would expect.

Now obviously at AHG its only short stints of work but I have no reason to believe the pads would not cope with heavier use. I plan on giving them a go at Wanneroo soon.

Dont be put off by the price guys, these pads really do as they say on the box and make a fantastic every day, multi-use performance pad!!

Just for the record...I have no link to GSL Rallysport or QFM other than being a satisfied customer.

Perth-WRX.com - View Single Post - Brakes Pads QFM A1RM $110ish ->>Ferodo DS2500

[gslrallysport]

QFM A1RM Fitted to S14 Silvia

Installed my front pads last week (A1RM) with DBA4000 rotors and so far Im very pleased. Initial bite is very good and they seem to pull the car up very quickly. So far much better than my old RB74s.

Nissansilvia.com -> QFM High Performance Street and Track Brake Pads! - Hardtuned.net

[minux]

Howdy,

Looking at trying something different to the EBC's I normally use. Wondering what pad you would recommend for VY Sen with 343 fronts(premium brake) and price. Cheers.

[gslrallysport]

Howdy,

Looking at trying something different to the EBC's I normally use. Wondering what pad you would recommend for VY Sen with 343 fronts(premium brake) and price. Cheers.

Hi mate,

What EBC's do you ussually run, or what do you use the car for?

Also, the 344 uses the C5 Twin pot doesn't it:
http://www.bendix.com.au/user_upload...nner_Outer.gif
not the Harrop 4 pot:
http://www.bendix.com.au/user_upload...ges/DB1355.gif

Cheers,
Greg

[minux]

Hi mate,

What EBC's do you ussually run, or what do you use the car for?

Also, the 344 uses the C5 Twin pot doesn't it:
http://www.bendix.com.au/user_upload...nner_Outer.gif
not the Harrop 4 pot:
http://www.bendix.com.au/user_upload...ges/DB1355.gif

Cheers,
Greg

hey sorry for the delay in replying, 343 uses the C5 i think...Ive never done them myself on this car, always paid to have it done. Normally use Redstuff's as i tend to do the odd bit circuit work moreso over road driving, but seeing as the car is more than likely going, not interested in that sort of pad. Would prefer something matched to the greenstuff.

If it helps, part number for Holden pads is 05A-000729.

Going through the owners manual, the brake mob who replaced pads at one stage used Bendix Ultimate with code DB1355ULT.

[gslrallysport]

mmm Ok, DB1355ULT is the Harrops, but like you I thought it just ran the C5 as well.

Quite way to tell, looking at the caliper from the outside, can you physically see the brake pads or not? Or can you see a metal tab holding the pads in at the top?

Or does you caliper look like this:
http://www.alastair-mcpherson.com/im...ubby%20024.jpg
or this:
http://www.corvettesports.com/images/image013c4.jpg

[minux]

here you go, a good shot, looks exactly like this, defiantly a harrop caliper, going by the logo.:

[gslrallysport]

Cool, the good news, we know which caliper it is... The bad news, only available in A1RM, and looking at $149. A select few pads (like these harrops, STi and Evo Brembo's and FPV Brembo's) are a bit more expensive than the usual $119...

Still, shouldn't be any more expensive than Bendix Ultimate or EBC Red, and will be a better pad than either of those. But probably a few more bucks than you were expecting...

[gslrallysport]

*** August QFM Special ***

Until the end of the August (or sold out) we're having a special on a few QFM pad packages to suit certain applications!

JZA80 Supra 2pot/1pot
8 x Front and rear A1RM, $218 delivered! (RRP $308 delivered)
2 x Front A1RM and rear HPX, $178 delivered! (RRP $258 delivered)

S13 SR20DET 180SX Silvia
12 x Front A1RM and rear HPX, $178 delivered! (RRP $258 delivered)

VE Commodore
5 x Front and Rear HPX, $138 delivered! (RRP $208 delivered)

JA, JB, JD Mistubishi Starion
5 x Front A1RM, $99 delivered (RRP $159 delivered)

JDM AE86 Sprinter
5 x Rear A1RM, $99 delivered (RRP $159 delivered)

VB-VS Commodore, EF-BA Falcon
5 x Rear A1RM, $99 delivered (RRP $159 delivered)

Any questions feel free to give us a bell on 1300 884 836.

Regards,
Greg

[gslrallysport]

A1RM Fitted to a Mitsubishi Legnum (Think Evo 5, but with 200kg more weight!)

I've got A1RM front pads with slotted rotors and they are great. Makes stock brakes (in my other legnum) feel like they don't work much at all. Very impressed!!

OzVR4.com

[gslrallysport]

A1RM Fitted To Skyline!

I have used them [A1RM] on my old R32 which had seen the track a few times and they were AWESOME!!! They are indeed low dust and relatively kind to the rotors for the kind of pad they are...can't recommend them highly enough...

SupraForums.com.AU - View Single Post - Brake Pads - QFM A1RM's / K750's

[gslrallysport]

*** VE HSV and Turbo JZA Supra (4/2 pot) QFM Pads Now Available!!! ***

Exclusive to GSL RallySport, now in stock!

VE HSV (And VZ HSV with AP 6 pot front and 4 pot rear)
Front A1RM - $179
Rear A1RM - $179

Turbo Supra (4/2 pot)
Front HPX $119
Rear HPX $119
Front A1RM $179
Rear A1RM $179

For more information, checkout QFM Performance, or give us a call on 1300 884 836.

Regards,
Greg

[gslrallysport]

More Outstanding Feedback on A1RM!!!

A1RM are fantastic, more bite than a standard pad when dead cold, and only get better when they get hot, and better still when they start to smoke up and the rotors go blue!

Bendix Ultimate's which I had before these for roughly the same price are absolutely terrible in comparison. Pads aren't noisy, basically the A1RM is awesome, will buy again in the future!

Nissansilvia.com -> QFM High Performance Street and Track Brake Pads! - Hardtuned.net

[gslrallysport]

Pretty Much Says It All...

nothing bad to say about the QFM pads except they're not free!

brake pads

[claudz]

are the brake pads still for sale?

[gslrallysport]

Most certainly!

[gslrallysport]

A1RM Fitted to an S14!

I used these pads on my S14... held up well! Similar in pad feel to Ferrodo DS2500s but without the hefty price tag

http://nissansilvia.com/forums/index...post&p=5383135

[TVR-190]

Hey mate I'm looking at getting some front a rear QFM HP-X pads for My VP, Car has the V8 Brake upgrade if it makes any difference.

Cheers

[gslrallysport]

Hey mate I'm looking at getting some front a rear QFM HP-X pads for My VP, Car has the V8 Brake upgrade if it makes any difference.

Cheers

Hi mate,

We're currently out of stock of front HPX, but I can offer you a set of A1RM for $99 (regular price $119). Rear HPX on the shelf, $79. Free shipping if you ordered both front and rear together.

Regards,
Greg

[boReys]

How much for a F&R HPX can wait till you get more in stock. For a Holden VX. PM if you like