QFM Brake Pads

[gslrallysport]

Hi mate,

Front and rear HPX for a VX (including full face police spec fronts) would be $158 delivered. Both front and rear in stock.

Regards,
Greg

[gslrallysport]

More positive feedback from HPX users!

HPX Pads received Greg- fantastic delivery speed!!
Bedded them in last night and i can say i'm VERY impressed. They have more bight and better co efficient than the RB74's i was previously using with better pedal modulation.

OzVR4

[gslrallysport]

QFM HPX Pads Fitted To An Import Legnum VR4!

Got my HPX pads bedded in now and they are very impressive. Progressive and pull up very smoothly, or VERY quick if you really want. They also produce stuff all dust and aren't noisy at all with my slotted rotors either. For the money these are excellent pads and much more confidence inspiring than the crappy pads that were on for compliance.

OzVR4

[Kal123]

I just installed A1RM's with slotted rotors, and must say I'm very impressed.

There is only slight brake noise (Which actually sounds quite cool, not squeaky at all) and brake dust is quite low.

[gslrallysport]

Another case of QFM A1RM for the win!

The QFM A1RM pads were a huge step up in pedal feel and control-ability...No more dead pedal, locking, ABS interference etc. The HPX pads I know nothing about but heard good things.

IMHO, if your ever doing a track day or maybe just hard driving, A1RM are the way to go...

OpelAus Forums - View Single Post - Brakes/Braking

[immortality]

Hi greg,

do you have a NZ supplier for these pads?

really keen to try a set

[gslrallysport]

No direct supplier in NZ, but we do ship OS. Shipping is $40 for an axle set individually, or $55 for 2 sets (ie. front and rear). Payment is either by credit card over the phone (I can PM you our number, the 1300 number doesn't work outside of Australia), or Paypal.

[gslrallysport]

QFM HPX on a VS Ute!

Well the QFM HPX BRAKE PADS are bedded in and I`m very happy with them.
I can really feel the better braking performance.

- Link not available due to it being hosted on another Commodore forum.

[gslrallysport]

QFM A1RM Fitted To Honda Civic!

The pads are mostly bedded in and I must say that I am VERY impressed.
Even when I was doing the progressive bedding (60-20, 80-20) they pulled up extremely well.

Very happy, will buy again!

Qfm High Performance Street And Track Brake Pads! - Boostcruising.com

[gslrallysport]

What else can you say?!

I have the A1RM's and these are by far and away the best "serious use" pads I have tried, bar none!!! If you want a high performance or track day pad these are the way to go!!!

In the SRi-T I tried EBC Green, EBC Red's, EBC Yellow's, Pagid, Ferodo DS2500 and the A1RM's win hands down!!!!! They even feel better than the Endless and Project Mu pads I have tried in my other cars...

Low dust, great pedal (the best pedal feel by a long way!), and excellent fade resistance with pedal control...

Highly recommended IMHO...

OpelAus Forums - View Single Post - QFM High Performance Street and Track Pads!

[gslrallysport]

QFM HPX Fitted To VT V8 Holden Calais!

My Calais was simply unstopable, brakes had no feel, no stopping power, it was no good at all. Then I discovered HPX brake pads. My car feels so much better, the car pulls up really quick with no brake noise and they don't fade at all.

THANKS GSL

QFM HPX VT-VZ Police Spec Performance Brake Pads

[gslrallysport]

A1RM Fitted To Mazda!

hey just wanna thank you for the qfm a1rm pads. i raced today at oran park and didnt get any brake fade what so ever. on the track for 15minute periods and driving hard they felt great!

No link available, received via Private Message

[gslrallysport]

QFM A1RM Fitted to JZA80 Supra!

Thought I'd add my 2c.

I recently made over my brakes with some braided lines, slotted rotors and the QFM A1RM pads. It wasn't just a pad change so I can't compare directly with the old set up however I'm bloody impressed with how the car pulls up now and I believe a lot of that is down to the new pads. The brake fade is quite minimul and significantly better than the stock Toyota pads I had on it previously. Slam on the brakes and it bites hard, time and time again. So much so that I sometimes feel if it pulled up quicker my face would somehow detach from my head and hit the windscreen like some weird crossover film between 'Gone in 60 seconds' and 'Face Off'. Unlike my old setup these certainly give me a sense of confidence through the twisties!

Either way, QFM A1RM pads = WIN

SupraForums.com.AU - View Single Post - Brake Pads - QFM A1RM's / K750's

[gslrallysport]

QFM are a cheaper alternative to Ferodo DS2500!

I just got the QFM A1RM's and they went well at sandown. Greg was very helpful and delivery was only 2 days.
Very cheap for $130. I don't think I'll be spending big on pads again after how they performed at Sandown.

I will monitor the wear but I get to about 220kmh before jumping on the brakes and they felt similar to my DS2500's.

Brake Pads Users Ratings Guide - Skylines Australia

[gslrallysport]

QFM A1RM - JZA80 Supra with upgraded 4/2 pot brakes!

Well said and i couldn't agree more. I have been running with QFM A1RM pads in my RZ Supra (4/2 pot) for about two months now and i have not looked back. I previously had Project Mu's and for street and the odd track day i would not recommend anything other than the A1RM's. A fantastic, excellent performing pad from the moment you leave the garage!

SupraForums.com.AU - View Single Post - Brake Pads - QFM A1RM's / K750's

[Ruzz]

hey i just put Qfm K500 HP-R on my car what do they compare to the others?

[gslrallysport]

HPX is what QFM call it, K500 is what it gets re-boxed as by a Victorian distributor...

[gslrallysport]

QFM A1RM For the Win!

Just a bit of feedback on the A1RM that we installed on my girlfriends car a few months back. After a number of laps at Collie where previously her Ferodo's would start to get soggy, the QFM pads were still biting hard and gave her heaps more confidence in later braking. They were also biting harder from cold, and she didn't manage to get them to fade the entire time. I had a go and I was pretty impressed for the price of the pad!

No link available, sent via Email!

[gslrallysport]

QFM A1RM fitted to Subaru WRX STi with Brembo calipers!

Hi Greg,

Quick update as promised on the A1RM's after a track day;

After missing a few track days due to extreme heat I finally got my STi out at Mallala over the weekend. It was windy and wet but I still managed to give the A1RM's a good working-over. The pad's held-up very well for the full 5 x 15min sessions held throughout the day. There are two very hard braking points at Mallala from 160+ klm/hr into a tight hair-pin - the A1RM's felt very reassuring with no brake fade at all. I couldn't be happier with the pads and will most likely order some for the rears soon.

Regards,
Mark

Sent via email, no link available

[gslrallysport]

QFM A1RM Fitted to R33 GTS-T Skyline!

Have a set of a1rm on the front of my 33 gtst, definitely excellent value for money. After a hard session I'd hardly have any stopping power with OEM pads and would have to waste time letting them cool down, with the a1rm pads on I've not yet experienced fade and have plenty of bite where the oem's would have led me in to the nearest wall!

Qfm High Performance Brake Pads, Including Comp 9! - Skylines Australia

[gslrallysport]

QFM A1RM Fitted to R33 GTS-T Skyline!

Have a set of a1rm on the front of my 33 gtst, definitely excellent value for money. After a hard session I'd hardly have any stopping power with OEM pads and would have to waste time letting them cool down, with the a1rm pads on I've not yet experienced fade and have plenty of bite where the oem's would have led me in to the nearest wall!

Qfm High Performance Brake Pads, Including Comp 9! - Skylines Australia

[gslrallysport]

QFM HPX High Performance Street Pads fitted to Mazda 6 MPS AWD!

Clocked up a few kilometres now and still pretty impressed, especially with the pedal feel.

I believe the new pads saved me from a mess today, I was driving at just under 60 kph beside a truck turning left in the the left lane (Bathurst RTA) when a Holden Rodeo pulled out in front of the truck. Spectacular quick stop with no dramas, just a few of those in and out words from my usually sedate co-pilot.

Virtually no dust - great
Terrific initial response on pedal

Thanks QFM & GSL RallySport - It would not have pulled up in time with the stock pads.

QFM High Performance Street and Track Pads! - Page 3

[gslrallysport]

QFM A1RM Fitted to Toyota JZX100 Turbo Chaser!

A bit of an update guys. Have just fitted set of the A1RM pads to my 100 today, and taken it around the streets to bed them in.. and my god the improvement over the pads that were in it previously (presume OEM pads) is amazing. The responsiveness of brake pedal is awesome, even when they are still pretty cold. Haven't had chance to take it for a proper hills run, so we'll see how they perform there but is all very promising!

QFM Brake Pads (JZX100) - JZX World Forums

[Drift_Clown_VN]

I chucked new QFM pads into my VN a couple of weeks and i havent looked back!

[gslrallysport]

QFM A1RM Fitted to Toyota JZX100 Turbo Chaser! (Different one!)

Just came back from a track day with the A1RM Pads up the front. They held up VERY well and continued to do so throughout the day. Worth buying!

QFM Brake Pads (JZX100) - JZX World Forums