I am running King SSL in the rear and SL in the front. I have stock shocks at the moment, will the KYB shortened shocks be ok with these springs?
Do i need a specific model of KYB shocks for these springs?
Fronts are ok but rears i would like to look at replacing. Ship to 5082.
Attached is a pic of how low it is if it is anyhelp.
__________________
Quote:
Originally Posted by Skitz
Go ahead with the SS badges,you will reap the benefits.
I have put SS badges and the kit on my VE Omega and when I go cruising and rev it past the girls.........well what can I say,they have drool running down their face.I chuck a U-turn and they say ''Nice car'' and I say ''It's an SS,jump in''.
Rear shocks for the SSL springs in the rear, you're probably better off going with the Boge. The Boge rear shortened is 60mm shorter, which is a fair bit more than the KYB shortened. Both should work fine, but the Boge is closer in length to what the spring is.
The KYB shortened rears are $65 each, whilst the Boge shortened are $69 each.
Sorry if I'm hiacking this thread but it relates to KYB. When I did a search on the KYB website for part numbers for a VS with IRS, it gives me the same front and rear part numbers no matter whether it be lowered or standard.
For example, it tells me fronts are 334313/334314 and rear 344312 for both standard and (lowered) FE2. Is this correct? Even Monore list different numbers for standard and FE2
Cheers.
__________________
Car theives should be treated just like horse theives and cattle rustlers in the days of the wild west... Hang them!
With IRS its not so critical that the shocks are shorter only for FE2 height. If you were going Super Low I'd recommend going to Boge shock as they do a shortened length shock for the both the front (25mm) and rear (60mm).
KYB Shocks
:
Linear Mode
