KYB / Kings Commodore Lowering Packages!

[D-Man]

hey Greg,

Is this still the price for the VT Sedan? springs and shocks. Also the camber kit? (those prices are from 2007 so they may be old..)

KYB / Kings Commodore Lowering Kits!

• VR-VY Sedan with IRS $675

Optional extras recommended when going 'Super Low' or lower:

• 4pt Camber Kit Suit IRS VT-VX1 $175

[gslrallysport]

Hi mate,

Yep, those prices are still current. I've updated the first post as we've gone along!

Regards,
Greg

[gslrallysport]

Price updated (Panhard rods got cheaper...)

[BXHD]

Even that doesn't sound right because $485 would too much for just rear springs/shocks/bumpstops...

It's a few bucks lower, but just work off $585 for front and rear shocks, rear springs and front bumpstops/boots.

Otherwise just front shocks would be $280 for the pair, plus shipping.

Cheers,
Greg

hey i found the old convo, its in ur other commodore lowerins package thread....

hi,
was just wondering how much it would be go get some good shockers/struts for my car. the front springs are part number: KHFL-47 SSL King Springs.
and i want to change the rear springs, it sits up too high at the back. are there SSSL rear springs to fit a vz? or what would u recommend?

how much would it cost me to get some rear springs, and shortened shockers. and the front struts/shockers and bump stops?

Thank-you in advance
__________________








Hi mate,

The number I'd go in the back would be KHRL-46SLHD.
Quote:
how much would it cost me to get some rear springs, and shortened shockers. and the front struts/shockers and bump stops?
For KYB's dedicated 50mm shortened shocks, rears springs, and front bump stops would be $485, plus $10 shipping.

Regards,
Greg
__________________
- GSL RallySport - Ph: 1300 884 836 -
Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
- QFM Performance Brake Pads -
Also specialising in
- DMS High Performance Shock Absorbers - Monit Rally Computers -




do u remember saying that?

lol it doesnt matter if u made a mistake, il probably get a package off u either way, just gotta rustle up some dough

[gslrallysport]

I'd say I had a brain fart... I'm guessing I only included front struts in that price, not rear shocks as well. It would normally be alot more than that, but work off $585 plus shipping for the full set of shocks, rear springs, and front bump stops.

[BXHD]

ok sounds good.
il pm u wen i get the cashola.
thanx for ur help.

[RedVrExec]

Hey Greg,

I wanna lower my VR Executive (live axle) with the super low king springs (as well as lower shocks) but i want the car to sit level so its the same height front and back, i have been reading that if you put super lows on front and back that the back will be higher than the front. Is this true? cause i really like the look of the when the car is sitting at the same height front and back. if it is higher at the back would you reckon that ultra lows on the back and super lows on the front would level it out? or lows on front and super lows on the back, cause i want it to be legal aswell.

Thanks

[rb26dett]

Springs turned up yesterday, cheers

Brendon

[azzfox]

Hi mate, how much postage would I be looking at for a springs + shocks package with panhard rod to VIC 3799?

Cheers.

[gslrallysport]

Hey Greg,

I wanna lower my VR Executive (live axle) with the super low king springs (as well as lower shocks) but i want the car to sit level so its the same height front and back, i have been reading that if you put super lows on front and back that the back will be higher than the front. Is this true? cause i really like the look of the when the car is sitting at the same height front and back. if it is higher at the back would you reckon that ultra lows on the back and super lows on the front would level it out? or lows on front and super lows on the back, cause i want it to be legal aswell.

Thanks

Hi mate,

Yep, that's basically the guts of it. To get that 'level' look you go one spring lower in the back that the front, so as you say, is super low front, and ultra low rear. Unfortunately I can't tell you if ultra low on the back of your car is legal. Spring height doesn't change the price, so all up for springs and shocks you'd be looking at $660, plus about $15 shipping to you.

The other thing you may need to consider is a rear adjustable panhard rod, and these are $165 for a premium on-car adjustable Whiteline one.

Regards,
Greg

[gslrallysport]

Hi mate,

A VN sedan is $575 for springs and shocks. Panhard rod is $165, and shipping is $25. All up would be $765 delivered.

Regards,
Greg

[azzfox]

Cheers. PM sent.

[Auzziephoenix]

In order to have King spring Superlows, will i need to change the shockers as well? im under the impression i dont unless i go SSL or lower.

If i dont, then how much for a set of 4 SL springs to suit live axel Vn toyota lexcen Sedan?
Shipped to Vic btw.

[09eddievz]

hi greg,i hav v6 vz wagon,
lovells super low front, lovells ultra low rear with 4pt c/kit fitted
are the fronts the 360000 catridge, or the 330000 complete struts
price for front and rear shocks only pls, ship to 3429

thanks and cheers chris

[RedVrExec]

Hi mate,

Yep, that's basically the guts of it. To get that 'level' look you go one spring lower in the back that the front, so as you say, is super low front, and ultra low rear. Unfortunately I can't tell you if ultra low on the back of your car is legal. Spring height doesn't change the price, so all up for springs and shocks you'd be looking at $660, plus about $15 shipping to you.

The other thing you may need to consider is a rear adjustable panhard rod, and these are $165 for a premium on-car adjustable Whiteline one.

Regards,
Greg

Ok mate, thanks for your help ill have to have a think about how low i want it and yeh i was thinking about gettin the panhard rod also.
thanks again

[calais24/7]

Hey Greg, my car came lowered on pedders touring or sports ryder im not sure but will find out, i want that 'level' look your talking about so if how would i go about in getting springs for the rear to find out how low i need them? Also what would be your total cost for rear springs and ship to canberra 2905
Cheers

[gslrallysport]

Hey Greg, my car came lowered on pedders touring or sports ryder im not sure but will find out, i want that 'level' look your talking about so if how would i go about in getting springs for the rear to find out how low i need them? Also what would be your total cost for rear springs and ship to canberra 2905
Cheers

Hi mate,

Easiest way to figure out which springs to grab is to measure the centre of hub to guard measurement, let me know what it is, and how much lower you'd like to go from there.

Regards,
Greg

[gslrallysport]

In order to have King spring Superlows, will i need to change the shockers as well? im under the impression i dont unless i go SSL or lower.

If i dont, then how much for a set of 4 SL springs to suit live axel Vn toyota lexcen Sedan?
Shipped to Vic btw.

Hi mate,

Generally Super Low (50mm) and lower will need shortened shocks. I would highly recommend it, but you can get away without them. They are cheap enough though...

2 pairs of springs would be $270, plus about $10 shipping.

Shortened rear shocks are $65 each. Fronts will be fine.

Regards,
Greg

[gslrallysport]

hi greg,i hav v6 vz wagon,
lovells super low front, lovells ultra low rear with 4pt c/kit fitted
are the fronts the 360000 catridge, or the 330000 complete struts
price for front and rear shocks only pls, ship to 3429

thanks and cheers chris

Hi Chris,

VR onwards was always a full strut. I can price up on the KYB, but they'll be fairly expensive because they don't yet make a 50mm shorter strut for the VZ, so we have to use VY shocks, with a sway bar link conversion kit for the front.

For your VZ Wagon, I'd recommend Boge, who do specific shocks for super low, and these are $145 each for the front, and $80 each for the rear.

Regards,
Greg

[calais24/7]

Hi mate,

Easiest way to figure out which springs to grab is to measure the centre of hub to guard measurement, let me know what it is, and how much lower you'd like to go from there.

Regards,
Greg

Thanks Greg thats easier than i expected, How much would i be looking at including shipping to ACT. also would i need new shocks or panhard rod?
cheers

[Skidney]

howdy greg

i want to lower my VP ute all around. i want to lower it the front 6cm and the back around 6-8cm for it to sit level and have the back wheels real close to the guards.

i drew a pic of how it is now


how much will it cost for everything needed? springs, shocks and bumpstops? i want to use king springs, but im not sure which ones i need..

dont include the panhard rod price because ill have to buy one later on down the track.

oh and postcode is SA 5043

cheers mate

[gslrallysport]

Thanks Greg thats easier than i expected, How much would i be looking at including shipping to ACT. also would i need new shocks or panhard rod?
cheers

Shipping to ACT would be $15. Shocks and/or panhard rod will depend on how low you're going...

Cheers,
Greg

[gslrallysport]

howdy greg

i want to lower my VP ute all around. i want to lower it the front 6cm and the back around 6-8cm for it to sit level and have the back wheels real close to the guards.

i drew a pic of how it is now


how much will it cost for everything needed? springs, shocks and bumpstops? i want to use king springs, but im not sure which ones i need..

dont include the panhard rod price because ill have to buy one later on down the track.

oh and postcode is SA 5043

cheers mate

Hi mate,

To get those heights will be Ultra low all round. Keep in mind that every application is different, and there's no way we could guarantee that it would be exactly the height you want, but ultra lows front and rear is the closest to your measurements according to King's hub-guard file.

For front and rear Kings Springs, and front and rear Boge shocks (our recommendation for the lowered ute) you're looking at $595, plus about $15 shipping.

Regards,
Greg

[Skidney]

yeah i just want the wheels to sit right in line with the guards if u know what i mean, but it still shouldnt be at an illegal height from the ground. (i hope)

in a couple of weeks when i have dosh ill get back to ya mate

[hsv_timo]

Hi mate I have A V6 Vt and im looking for ultra low rear and ssl front the complete kit with shocks what kind of price would they be and do you think it would sit even