WK / WL Statesman Indicators to VY / VZ

[TVR-190]

Parts Required:
WK / WL Indicators: Roughly $20 a side
Bulbs: $5 for pack of 2 from Repco

Before:

After:

1. To remove, push from the rear of the indicator forwards while pulling outwards. this can be tricky with the VY/ VZ indicators and you may find it easier to slip something underneath the indicator to help push it out



2. After the old indicator comes out, take note of which way the tab on the back faces then rotate the bulb housing until it comes free.

3.Take out the clear bulb and insert the orange bulb.

5. Screw the bulb housing back into the indicator.

6. To put back in. ensure the tab on the indicator is at the same end as when you took out the old indicator and push that end in. then push the indicator forward and in at the same time until it clips in. Ensure it is secure.

End result:

[Zeussy]

Good write up, got some today from Holden, cheap as chips Like $13-$15 each, (trade price apparently)

[Juzman]

Parts Required:
WK / WL Indicators: Roughly $20 a side
Bulbs: $5 for pack of 2 from Repco

Sorry to dig up such an old thread. Is there a reason to get orange bulbs, or can just use the normal ones that are already in the panel? I have a SV8 and thinking of putting these indicators on.

[TVR-190]

The ones that are already in the guards should be orange if i remember right

[RIP 05]

might have a go at this on monday.

[TVR-190]

Just a better picture of how they look.

[VKCOMMO]

TVR, do these need phantom bulbs, or just regular ones?

[GAMBLR]

Regular bulbs are fine, for memory the WK lenses have a phantom-style piece that hides the bulbs anyway.