[VT-VX] How to fit VY SS Pedals

[GE4CE]

Just fitted some VY sports pedals to my VT with info i got from Andyos
Thought i would put his original info up and add some photos and tips
Choose the pedals that will suit your application (Manaul or Auto)

The accelerator pedal is a bit tricky and easier to do if you remove the pedal assembly from the car.
You have to lay on your back and look right up the shaft of the accelerator pedal and you can see where the accelerator cable is clipped into a plastic clip.Just release it.



Then there are four bolts holding the pedal assembly into the car


The accelerator pedal is held on by a pin running through the pedal and through the middle of a spring.
Hold the assembly in a vice and knock out pin remembering which way the spring was sitting.



Fit new pedal put spring and pin back in and assemble back in car remembering to attach accelerator cable again


The foot rest is 2 10mm bolts remove,fit new footrest and tighten
(touch up bolts with matt black or similar)
The Brake pedal you just pull the rubber one off and fit the new one on.


Hope this helps others that want to try this

....................Cheers ..........GE4CE

 

[D_STIG]

this is very helpful thanks

 

[Lamby22]

Is this same for a VR?

 

[Verynice]

cheers for this man, probably gonna do mine soon.

Also for the VR/VS, the pedals should be a straight swap, but the footrest needs a little modification to fit perfectly.

 

[Lamby22]

Cheers man, copy cat hahaha.

 

[Verynice]

haha nah man how am i copying. I actually got some VY SS pedals on the way

 

[stocky]

yeah its the same as mentioned. did this to mine a few weeks ago

 

[Lamby22]

Thanks stocky

Now to go buy some

 

[LthlThrt]

great write up, when you pull out the accelerator, is there any problem puting it back in(with the accelerator cable)?

 

[GE4CE]

great write up, when you pull out the accelerator, is there any problem puting it back in(with the accelerator cable)?

No not at all,ive added a photo for removal and you just reverse the procedure when fitting

When you take the accelerator cable off and grab that grommet and slightly pull back on it, its the same action as accelerating, it will come out a fair way so fitting will be (is) easy.