hey
ive just installed an additional 1GB stick (2nd slot) of DDR Ram, i only had a 512mb stick before (1st Slot). it still runs but windows XP wont find it, however pcwizard2008 says its there but that the slot is empty.
it will not boot with the 1GB stick solely on its own in slot 1.
and i cant remember where in the startup BIOS to go to see if its there.
thanks
What kind of motherboard are you using?
Can you try the 1gb stick on it's own in slot 2?
Are the 512 stick and the 1GB stick the same speed? like mhz? i heard that they need to be the same i think? not sure...
GOod luck
i think the 1GB is slightly higher mhz, the board is a ABIT SG72, its a few yrs old, and this is the only ram MSY had. ill try ur suggestion james
Your motherboard supports up to 2gb. - Abit SG-72 Specs
Two 184-pin DIMM sockets (Un-buffered Non-ECC DIMM)
Supports 2 DIMM DDR 266/333/400 (Max. 2GB)
Try the 1GB chip on its own in slot 1, and then try it in slot 2 on its own.
If it fails in both, I would suggest that the 1gb stick is faulty.
What is the brand / model of the 1gb stick??
CHECK OUT MY RIDE
![]()
IF I WAS HELPFUL TOO YOU CLICK MY SCALES
"Girls are like domain names, all the good ones are taken."
1GB will not work on its own in slot 1 or 2. yeah im taking it back tomorrow as they said they will give me a new stick, i might take the comp with me so i dont have to do this again. they sold me kingston as 'they are more compatible than the cheaper brands' $64
Does it detect the ram when posting? Download memtest86 and give it a shot.
you could have damaged it when you put it into your computer if you had the slightest electrostatic in you, or if you touched any of the pins or the i/c's on the ram. if you end up putting in another one be gentle with it and try to handle it on either end of the stick. or it just could be faulty from when you bought it
yeah as i said im going back for a new one. thanks for the help ppl, ill post when i get new ram
i ran into trouble last time i bought new ram. i ended up that my mobo would only recognise low density ram and i had bought high density ram
cheers shane
heres my ride, i know its not much but its mine
http://forums.justcommodores.com.au/...-ss-crewy.html
and heres my new project
http://forums.justcommodores.com.au/...ml#post1104629
update - went back to shop, he tried with only the 1GB stick in slot 1 by itself and it booted no worries, stupid comp. looks like i just cant use the 512mb stick and the 1GB stick together.
thanks for the advice
Chances are it needs matched pairs in size if it is a dual channel MB. Best bet if it is DDR2 is to go buy another 1G stick as they are dirt cheap these days.
CHECK OUT MY RIDE
![]()
IF I WAS HELPFUL TOO YOU CLICK MY SCALES
"Girls are like domain names, all the good ones are taken."
i went to the swapmeet bout 3 weeks ago n bought 1 stick of ddr2 for 35 i think, and normal ddr was either the same price or 5bux more cant remember.