Tacho pickup on coils? Plus vacuum feed?

[one_and_only2004]

Does anyone know which one the tacho wire is on LS coils? I need the signal for my eboost.
Also, where's the best spot to pick up a vacuum reference for the BOV and wastegate?

[OFF T4P]

Not sure about tacho wire but i would also like to know so i can wire my eboost up too. The best place i have found to use is at the back of the manifold next to the map sensor there is a pcv line that runs into the car with a little valve on it (think its for heater or ac). I have used this line for bov's and wastegates befor with out any dramas. Just be sure to T it in on the manifold side of the little valve because that valve is a one way valve.

[one_and_only2004]

Oh righto thanks. With your eboost make sure you run the solenoid off a pressure only feed (so before the throttle body)