Mace HOLDEN PERFORMANCE MEMCAL TO SUIT VT V6/V8 AUTO - MANUAL

[MACE]

would it still run on 91? it said to expect a gain of 8-12KW on regular, plus a bit more on premium

It will however I would still recommend premium for a number of reason.

Cheers
Steve

[VSCristian]

just installed my memcal on my VS V6 A4 with enclosed pod cai, 4inch intake ducting, 12mm plenum spacer, extractors and 2.5inch redback catback...

quite a difference... i have decent tyres and wheelspin used to be very rare.. I put my foot down on takeoff in power mode and got really hard wheelspin for a second before she flew away!

in-gear she's torqueier, far quicker and holds gears longer.. her acceleration is frightening!
good work MACE!

was wondering, are the speed and rev limits the same? and with the aforementioned revs, what kinda torque would i be looking at because not only does the car move noticibly quicker, she moves quicker at the same revs, and 1500-2500 she's way quicker than before, and she revs from 2000-4500rpm exceptionally quick, making my insides feel heaps funny! 4500-5700rpm she's a little quicker to rev than before, and pulls a bit stronger too

[MACE]

Glad to hear that it's gone well

As for the rev limit it should be the same, the shift points different though.

Cheers
Steve

[VSCristian]

I was wondering, what kind of torque gains would I get from the tune?

[MACE]

From memory with that memcal peak torque increases by around 5%

Cheers
Steve

[jas98]

how much are theses tunes?

i have a vt andvs

vt is stock vs has slight mods (exhaust, plenum spacer, CAI, corvette servo and extractors)

cheers

[MACE]

how much are theses tunes?

i have a vt andvs

vt is stock vs has slight mods (exhaust, plenum spacer, CAI, corvette servo and extractors)

cheers

For memcal prices please check out the link below

Memcals - MACE ENGINEERING GROUP

Cheers
Steve

[VSCristian]

My VS (running a MACE memcal) seems to pull a bit harder on E10 than she does on 91... a few mates, and the missus reckon so too... are we all imagining things?

[MACE]

Long story short...

E10 fuel is approximately equal to 95 octane straight unleaded fuel. The memcals we supply work better with higher octane fuels.

Hope this helps

Cheers
Steve

[VSCristian]

sweet..... pulls harder on cheaper fuel, fuel economy is about the same... good work guys!

[MACE]

Ah Nice

[patto_505]

sorry to thread dig but i have a vx spack manual and cant decide wether to get your memcal or your plenum spacer the only mod i have is a 2.5 from the cat, i am planning extractors and your spacer or memcal down the track i just cant decide which one first, whats your recomendation?

[MACE]

sorry to thread dig but i have a vx spack manual and cant decide wether to get your memcal or your plenum spacer the only mod i have is a 2.5 from the cat, i am planning extractors and your spacer or memcal down the track i just cant decide which one first, whats your recomendation?

The choice is easy then, as we don't have a memcal to suit your VX at the moment, as the memcal as such is soldered on the board it's self. If your on a budget I would start off with a manifold insulator first, I wouldn't worry about the extrators to be honest at the moment.

Hope this helps

Cheers,
Steve

[SKNOT9]

do your memcals work on a changeover basis? do we get a small refund if we return our original memcal to you?

[MACE]

do your memcals work on a changeover basis? do we get a small refund if we return our original memcal to you?

Our memcals are sold outright. If you returned your old one we can give you a $25 refund.

Cheers,
Steve

[theghostoftime1978]

hi guys, got a vt memcal about 1 month ago. after driving around a bit and after a few tank fulls. im not sure im seeing any fuel saving on my stock VT. before upgrade i was getting around 11.5 to 12.5L/100km. now it seems im getting 13 to 14L/100km??

[someguy360]

I got one for my VS.

Installed that, pacemakers & catback & 98 Octane and it flies.

Small tap on the accelerator now and wheelspin galore :P

Can't wait to see how it will be once I do the CAI & Manifold/Plenum Spacers

[knight_vs]

ive been considering a memcal also for my vs ecotec though my autos been shift kitted though would the memcal work good with the shift kit or only work with original shifting pattern of the stock auto cheers

[MACE]

hi guys, got a vt memcal about 1 month ago. after driving around a bit and after a few tank fulls. im not sure im seeing any fuel saving on my stock VT. before upgrade i was getting around 11.5 to 12.5L/100km. now it seems im getting 13 to 14L/100km??

Did you get a memcal off us out of interest? If you did it could be a number of things. Worse case though if you're genuinely not happy with the item you can bring it back for a refund.

I got one for my VS.

Installed that, pacemakers & catback & 98 Octane and it flies.

Small tap on the accelerator now and wheelspin galore :P

Can't wait to see how it will be once I do the CAI & Manifold/Plenum Spacers

Glad your happy with our memcal someguy360

ive been considering a memcal also for my vs ecotec though my autos been shift kitted though would the memcal work good with the shift kit or only work with original shifting pattern of the stock auto cheers

If you let us know what you’re after we can help out

Cheers,
Steve

[vsv6dude]

Steve the website shows only one chip for vs v6 auto is this one size fits all.

Is it suitable for the following.

My vehicle has basic mods.

CAI Holden Super 6 over radiator
CAT Back sports system 2.25" straight through
82 deg C thermostat
12mm Manifold Spacer
95 Ron Premium Unleaded

[MACE]

Steve the website shows only one chip for vs v6 auto is this one size fits all.

Is it suitable for the following.

My vehicle has basic mods.

CAI Holden Super 6 over radiator
CAT Back sports system 2.25" straight through
82 deg C thermostat
12mm Manifold Spacer
95 Ron Premium Unleaded

Hey vsv6dude,

We can supply something to suit. If you're ordering it online there is a field at the end of the ordering process that you can add additional information about any requirements. In saying this though orders can be placed via email, PM or phone.

If you have any more questions please don't hesitate to ask.

Cheers,
Steve

[rage_against]

The choice is easy then, as we don't have a memcal to suit your VX at the moment, as the memcal as such is soldered on the board it's self.

Hope this helps

Cheers,
Steve

sorry to dig up old posts, im looking at your vx s/c memcals, on your website you have them listed but whats required for install if its soldered onto the board? pm or email me if you like, and thanks a lot mace.

[MACE]

sorry to dig up old posts, im looking at your vx s/c memcals, on your website you have them listed but whats required for install if its soldered onto the board? pm or email me if you like, and thanks a lot mace.

Hey rage_against,

They're genuine plug in item, with no soldiering required.

If you have any other questions please don't hesitate to ask.

Cheers,
Steve