vu s pack ute

[large]

Just wondering if u guys have done much work on utes

Thanks kyle

[HamaTime™]

Doesn't matter what body you have mate. A VU II S has an Ecotec motor in it and MACE is a specialty in V6's. Have a look through the V6 Performance Parts thread.

[large]

So just be under vt yea

Just don't wana go buy the cam chip package and plenum and manifold Spacer for it to not fit that's all

[large]

I realise this I just wana make sure I'm ordering the right parts don't want to spend $1500 on the wrong bits lol

[MACE]

Hey Kyle,

We've done heaps of utes over the years so it's not a problem for us

In your case, bang for buck I would consider the following mods in order.

Rockers
Manifold insulator
Cold air intake
Plenum spacer
Larger throttle body.

If you have any more questions please don't hesitate to ask.

Cheers
Steve

[large]

Well I just ordered 25mm manifold insulator.
And 12mm plenum Spacer.

[large]

And also new thermostat

[MACE]

No problems Large,

You'll be happy with these

If you have any more questions please don't hesitate to ask.

Cheers
Steve

[large]

Now I'm looking at cams now if u get stage 2 cam will I also need to get new pushrod and springs or is it just recommend

[large]

Also wat rocker should I get to suit stage 2 cam or should I get cam to suit rockers

[MACE]

Now I'm looking at cams now if u get stage 2 cam will I also need to get new pushrod and springs or is it just recommend

Also wat rocker should I get to suit stage 2 cam or should I get cam to suit rockers

Hey large,

The bare requirements for the stage 2 COMP CAM, would just be the cam and computer reprogramming itself.

For a more quality install I would recommend the following

Stage 2 COMP CAM and tune
Valve springs 105#
Retainers to suit
Shorter valve stem seals
Inlet manifold gaskets
Double row timing chain
Oil pump cover (for chain clearance)

Can go a 1.75:1 ratio rocker, which we can supply for the job if you wanted more from the cam

If you have any more questions please don't hesitate to ask.

Cheers,
Steve

[large]

So wat am I looking at for cam and recommend parts without the rockers

[MACE]

For a quality install I would recommend the following

Stage 2 COMP CAM and tune
Valve springs 105#
Retainers to suit
Shorter valve stem seals
Inlet manifold gaskets
Double row timing chain
Oil pump cover (for chain clearance)

If you have any more questions please don't hesitate to ask.

Cheers,
Steve

[large]

Cnt wait for my parts to arrive

[MACE]

They should be there shortly

Cheers
Steve

[large]

Yippe parts arrived today just as described will be putting on nxt wknd cnt wait to feel the result

[large]

Hey Steve just curious would these products be able to be painted in high temp paint off course and sand bck the surface area or beta leaving alone

[MACE]

They can be painted if you wished using quality automotive paint provided you prep the surface first.

Cheers
Steve

[large]

Thanks mace love the product even though lol I got nice fine from wat ure product produced down low ay top job

A+ product

[MACE]

Not a worry large, glad to hear your happy

On the fine note please take it easy out there.

Best Regards,
Steve