top end ecotec mod

[STL17]

Hey steve i was going to buy the spacers from u for my ecotec but i see they are good for down low power i have 3.7 diff gears and a chiptourque chip and im chasing mid to high range power wat would suggest

Thanks brad

Ps. Its a family car so no boost

[acarmody]

Higher ratio rockers.

[STL17]

Yeh got the cash for them so yeh wat the hell ill get them then get the spacers next week. Will it be a big difference in power if i put roller rockers on will it affect my down low from my 3.7

[Clint_G]

did you get the diff gears of damo

[MACE]

Hey STL17,

What kind of car is it going onto?

Cheers,
Steve

[acarmody]

Yeh got the cash for them so yeh wat the hell ill get them then get the spacers next week. Will it be a big difference in power if i put roller rockers on will it affect my down low from my 3.7

Down low shouldn't be affetced, but mid/high you will feel it.

[STL17]

Stock exsaughst aswell but im getting big stuff done then ill put extractors and full system on

[STL17]

Into a vn with a vs v6 ecotec motor its also auto.

Clint nah why dat

[Clint_G]

damo said you were looking at getting the 3.7s from old mans ute. just curious to see if you got them thats all.

[MACE]

Stock exsaughst aswell but im getting big stuff done then ill put extractors and full system on

If you want to maintain down low torque then I won’t get extractors, to be honest. Also valve for money I would also save them till one of the very last mods if you’re planning on buying new. Cat back exhaust on the other hand definitely works well.

Into a vn with a vs v6 ecotec motor its also auto.

Clint nah why dat

Nice Is it running the VS or VN computer

If you want more bottom end torque then I would highly recommend going with a manifold insulator first. More mid to top end I would go a set of rockers.

If you have any more questions please don’t hesitate to ask.

Cheers,
Steve

[STL17]

Vs computer. So stay with stock headers and run a cat back system and rrockers and later on get spacers and extractors? If i get rockers from you do i get a mace stickr lol

[MACE]

"So stay with stock headers and run a cat back system and rrockers and later on get spacers and extractors?"
If you want more bottom end torque now then go for the spacer. Otherwise go for the rockers. I would only consider the extractor as one of the very last mods.

"If i get rockers from you do i get a mace stickr lol"
Yes

If you have any more questions please don’t hesitate to ask.

Cheers,
Steve

[STL17]

Sweet ill buy a set of rockers tomorrow as im happy with my down low pull off the line with the 3.7s

Thanks brad b

[STL17]

How fast is postage??? Can i pay for express

[MACE]

To be honest we don't have the 1.9's in stock, we should get these sometime next week.

Worse case you should see these sometime after the 31st of Jan

They're normally sent of via express. We have the 1.98's in stock and at the moment can do a better price on them if you're interested.

Cheers,
Steve

[STL17]

Yeh im interested steve send me details via pm. how different are they between rockers

[MACE]

The difference between the two is that the 1.98's open the valves more compared to the 1.9's therefore making more power. You have a PM

Cheers,
Steve

[STL17]

Sweet all orderd now my next question would be if i get the spacers i need a 69mm throttle body and cai will i need to get my chiptourque chip retuned

[MACE]

Sweet all orderd now my next question would be if i get the spacers i need a 69mm throttle body and cai will i need to get my chiptourque chip retuned

To be honest I'm not sure. It would depend on how the tune was done. Best people to talk to would be chiptorque themselves.

Hope this helps,

Cheers,
Steve

[STL17]

Ok no worries ill just see wat power gain i get out of the 1.98 's and the spacers and if its not enough ill buy cai and throttle body and get a retune

[MR_VX]

Ok no worries ill just see wat power gain i get out of the 1.98 's and the spacers and if its not enough ill buy cai and throttle body and get a retune

let us no how you go with the gains?

[STL17]

Yeh i will im taking down the line tonight with the only mods being 3.7 diff gears and a chiptourque tune that way wen i put mace stuff on i can see the gains