Page 4 of 44 FirstFirst 1234567814 ... LastLast
Results 76 to 100 of 1076
Like Tree64Likes

Thread: ///The Euro I4 Project

  1. #76
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    more sandblasting, grinding and welding today.

    sandblasted, then hit it with some killrust. then i started wedling the rust holes and trim holes. it got a bit thin in a few areas, so i had to chase it, just gotta finish griding it back and weld up any bits that come through. thin film of bog, sand it back and the sills ready for paint.



    dad sandblsted that bit of rust on the front window, turn out there was a bubble that we thought was just bog, turned out to be a decent hole. and there was about 3 pinholes along the rusted area. all welded now, just gotta grind back. also burnt some foam hiding up under the pillar area.



    LHS door welded and primed. just needs some bog over the rusted area, and the door lock which i took out and welded up.



    took RHS door off aswell, will make it easier to fix the rust, and to paint in the door jambs. im removnig door lock on this one aswell, and moving the mirrors forward a bit, which requires welding some old holes up.


  2. #77
    Renno's Avatar
    Renno is offline Home Of The Shiny Tank
    Ride
    VN Calais 5L

    Join Date
    Dec 2008
    Location
    Defected And In The Shed
    Posts
    77

    Default

    Nice work so far mate!

    Was watching the Red BMW of urs for a while and i gotta say, this new one is looking ****ing nuts!

  3. #78
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    cheers renno, yeh, this one i think will be nicer than the red one in the end.

    more work today, dad will do some stuff tomorrow, but i wont, gotta bloody work.

    welded the rust patch in lhs rear quarter behind wheel, welded mirror holes up on drivers door, so i can reposition the new mirrors, welded clip holes in rhs door sill and grinded back ready for sandblasting

    got the right hand side lower area painted bar the sill, which needs sandblasting and smoothing still. and we gotta respray the quarter just behind the door, had the gun on full pressure and it copped a bit much and ran(forgot to bother hooking up the regulator)



    lower bit of back is painted aswell, and top section is smoothed of all holes, ready for paint.



    and left hand side was still drying, so couldnt sand it back today.

    Last edited by hakhawk; 28-02-2009 at 06:51 PM.

  4. #79
    NickVR's Avatar
    NickVR is offline Donating Member
    Ride
    VR Executive A4 V8

    Join Date
    Jun 2006
    Location
    Adelaide, SA
    Posts
    1,299

    Default

    The BMW is looking good mate. Some nice work done on it. Looking forward to more progress pics. Hows the wagon going?

  5. #80
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    havent touched the wagon in ages, poor thing. need the bmw out of the shed and the shed cleaned up first.

  6. #81
    Goon's Avatar
    Goon is offline The Future.
    Ride
    04VYS2/V6. 79VBSL6. 04Mazda3

    Join Date
    Feb 2006
    Location
    GC. QLD
    Posts
    2,422

    Default

    You should resize your pictures bro, just use windows paint to resize them.. taking ages to load..

    nice progress btw
    Quote Originally Posted by Jamie-b View Post
    well i think a "headjob" would be better than stroking it?

  7. #82
    Dirbatua's Avatar
    Dirbatua is offline Say No to Chev Badges
    Ride
    VX SS, VR Clubsport

    Join Date
    Apr 2003
    Location
    S/e Victoria
    Posts
    2,905

    Default

    Quote Originally Posted by Goon View Post
    You should resize your pictures bro, just use windows paint to resize them.. taking ages to load..

    nice progress btw
    it has nothing to do with the picture size, he hosts the pics on a server at his house and he has shithouse upload speed and he is too ****ing lazy to make a photobucket account.

  8. #83
    Goon's Avatar
    Goon is offline The Future.
    Ride
    04VYS2/V6. 79VBSL6. 04Mazda3

    Join Date
    Feb 2006
    Location
    GC. QLD
    Posts
    2,422

    Default

    Quote Originally Posted by Dirbatua View Post
    it has nothing to do with the picture size, he hosts the pics on a server at his house and he has shithouse upload speed and he is too ****ing lazy to make a photobucket account.
    Or imageshack no need for an account..

    What colour are u painting her in the end? red??

    Wicked Seats!!
    Quote Originally Posted by Jamie-b View Post
    well i think a "headjob" would be better than stroking it?

  9. #84
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    Quote Originally Posted by Dirbatua View Post
    it has nothing to do with the picture size, he hosts the pics on a server at his house and he has shithouse upload speed and he is too ****ing lazy to make a photobucket account.
    Quote Originally Posted by Goon View Post
    Or imageshack no need for an account..

    What colour are u painting her in the end? red??

    Wicked Seats!!
    nope, its staying blue over calais grey.

    cbf with imageshack and the likes, this way i can keep track of my pics, change them as i need and not have to re upload all the time.

    i'll upgrade my internet when i stop spending money on the cars.

  10. #85
    ephect's Avatar
    ephect is online now Donating Member
    Ride
    VS Acclaim V6

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    3,265

    Default

    oooooo looking sweet man, when u looking at painting the lower half?
    ------------------------------------------------------
    ------------------------------------------------------

    Quote Originally Posted by JEZIMP View Post
    jsut quickly, wat is a ffs search, ive seen it a fair bit and not sure wat it is, so some help would b greatly appreciated on where and how to do it, thankz
    Quote Originally Posted by vcstarfirequeen View Post
    its a 5 stud and u couldnt just weld a new stud on youd have to weld 5 new ones on i may be blonde but im not dumb

    Wanted: VR/VS Standard Rear Bumper Bar - Can be damaged - PM me if you have one

  11. #86
    Jesterarts's Avatar
    Jesterarts is offline Your freedom ends where mine begins
    Ride
    2005 HSV Z R8 Manual

    Join Date
    Nov 2005
    Location
    Mornington, VIC
    Posts
    3,142

  12. #87
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    Quote Originally Posted by Jesterarts View Post
    FYI... I'm stealing those rims

    Looking good mate... keep it up!
    you can only but try!!

    should get the bottom all painted this weekend. and maybe start the blue areas we're gonna clean up

  13. #88
    Jo3_Blo's Avatar
    Jo3_Blo is offline HZ Holden Fanatic
    Ride
    WB 1 Tonner, VS Ute

    Join Date
    Jun 2006
    Location
    Vic
    Posts
    760

    Default

    Looking really good man. Comming along nicely.
    FORSALE - BRICKIES TRESTLES + SOLID STEEL SPIRAL STAIRCASE. -
    http://forums.justcommodores.com.au/...ressively.html

  14. #89
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    yay for long weekends(with some half decent weather for a change!!)

    between today and yesterday, both sides, front and back lower is now all grey. lhs lower door is grey, rhs door i took about 1/2kg of bog out of and is almost ready for some grey.

    got rear sides primed ready for paint tomorrow, painted rear center area and boot seal area.

    primed and waiting




    whole things definately gonna need a redo in blue, this is what its "supposed" to look like, much more blue than the old crap that was put on it.




    speaking of old crap, some masking tape decided to peel off a section of old paint with ease





    oh, and i got what i think is the last rusty hole welded today. still some surface rust hiding under the carpet, but i'll deal with that when i rip the sound deadener out(after rego)

  15. #90
    Pub247's Avatar
    Pub247 is offline Donating Member
    Ride
    92 VP wagon Daily

    Join Date
    Apr 2006
    Location
    Melbourne S.E.
    Posts
    3,223

    Default

    repainting whole car now?
    that blue looks very blue compared to original paint
    Quote Originally Posted by Smidy
    How many kw would i need to beat vin diesil to the train lines?

  16. #91
    Dirbatua's Avatar
    Dirbatua is offline Say No to Chev Badges
    Ride
    VX SS, VR Clubsport

    Join Date
    Apr 2003
    Location
    S/e Victoria
    Posts
    2,905

  17. #92
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    plan was to eventually respray whole car, just didnt expect to end up doing so much already.

    will be leaving bonnet, front guards and roof til after rego.

    main reason most of its getting done now is from repairs in those areas, and the last paint job was so shit, that trying to said it down, it wouldnt feather, just break away.

  18. #93
    Dirbatua's Avatar
    Dirbatua is offline Say No to Chev Badges
    Ride
    VX SS, VR Clubsport

    Join Date
    Apr 2003
    Location
    S/e Victoria
    Posts
    2,905

  19. #94
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    Quote Originally Posted by Dirbatua View Post
    ah well might as well do it all now and save urself the trouble down the track.
    stuff the rest of the paint, i wanna drive the thing!!!

  20. #95
    Dirbatua's Avatar
    Dirbatua is offline Say No to Chev Badges
    Ride
    VX SS, VR Clubsport

    Join Date
    Apr 2003
    Location
    S/e Victoria
    Posts
    2,905

  21. #96
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    Quote Originally Posted by Dirbatua View Post
    well even a bmw is better then lowwags1
    harsh but so true

    lowagz v1.0 looks like shit these days.

  22. #97
    Dirbatua's Avatar
    Dirbatua is offline Say No to Chev Badges
    Ride
    VX SS, VR Clubsport

    Join Date
    Apr 2003
    Location
    S/e Victoria
    Posts
    2,905

    Default

    lol i know cause u let it go to hell since lowwags2 was supposed to be finished almost a year ago

  23. #98
    Jesterarts's Avatar
    Jesterarts is offline Your freedom ends where mine begins
    Ride
    2005 HSV Z R8 Manual

    Join Date
    Nov 2005
    Location
    Mornington, VIC
    Posts
    3,142

    Default

    Just noticed... LOVE the door hinges!!! haha... they are basically the same as I had on my old fj40!!

    Coming along good mate...

    Should look awesome finished!

  24. #99
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    Quote Originally Posted by Jesterarts View Post
    Just noticed... LOVE the door hinges!!! haha... they are basically the same as I had on my old fj40!!

    Coming along good mate...

    Should look awesome finished!
    haha yeh, theyre basic as hell, but theyre friggin strong!! in 32 years, the welds havent budged, and the hinges are still nice and solid. only thing broken is the door straps, but it still does its job at stopping the door before going too far.

    coffee break atm, then back to it. letting a door dry before putting it outside to prime the other door, then when theyre both drying, we'll throw some colour on the car

  25. #100
    hakhawk's Avatar
    hakhawk is offline smooth moderator
    Ride
    BMW E21 320i, E36 318IS coupe

    Join Date
    Jan 2005
    Posts
    5,087

    Default

    quick teaser, definately finishing the paint before too long. waaaaaaaaaay different!!




    back to it

Page 4 of 44 FirstFirst 1234567814 ... LastLast

Similar Threads

  1. ///The Euro V8 Daily
    By HoZy in forum Miscellaneous
    Replies: 153
    Last Post: Today, 09:07 AM
  2. euro, or white plates??
    By mcnmn in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 8
    Last Post: 08-06-2008, 10:47 AM
  3. Euro style Headlights for the vx
    By neobristol in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 3
    Last Post: 04-11-2006, 11:37 PM
  4. euro tail lights
    By Haze in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 10
    Last Post: 09-02-2006, 11:00 PM
  5. monaro/euro lights
    By super_6 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 3
    Last Post: 19-07-2005, 10:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71