***UPDATED***
Hi guys, got a white april 94' vr ss BT1 (on the plate) has been in a accident from drivers side centre pillar.
D&T Exhaust and pacemaker extractors
most parts still available, open to offers
engine trans and diff not available at this stage
VR/VS foglights x2(without brackets) $50 **sold pending payment
SS INDUCTIONS Big mouth cold air induction with matching (kingdragon) washable air filter suit 5 litre
SS Inductions - Performance Automotive Enhancements $300 for both
VR/VS ss rear bar with red strip and lower lip (has slight crack on bumper see pic) $180 **SOLD
VR/VS Headlights with globes - $30each or $50pair
VR/VS Tailights with globe holders $30each or $50pair
VR/VS Dash facia black $20 without switches or $40 with switches
VR/VS guages 207639km with tacho $30
VR/VS foglight switch $20
VR/VS front door speaker pods with dynamat $10pair
VR-VX wiper stalk $5
VR/VS steering wheel without centre $15 (exccelent condition)
VR SS 5litre whole car loom(air bag sensor has been cut) $50
VR/VS crash pad/dash (grey excelect condition) $30
VN-VS rear ash trays $10 each
VR/VS front door mirrors, electric $25 each or $40pair
VT/VX speakers (all 4 doors plus dash tweeters) $30
AMG 17" rims x3 $100 for all 3
VQ rear reflector garnish $100 (excelent condition except small crack)
VR/VS exterior door handles $10 for 3
VT/VX centre console lid $15
VN/VP rear view mirror $10
VN guages without tacho 287813km $20
VQ numberplate holder with numberplate lights $30
VN guage surround (headlight and wiper controls) excellent condition $30
VN-VS eyelevel brakelight $10
Pioneer CD player $20
VN V6 computer $20VN-VS auto shifter head $10
VN boot release solinoid $10
VR/VS Brake booster and master cylinder $40
VR complete steering column with wheel, stalk and shaft $50
Can post at buyers expense
PM spacific pictures
cheers guys
Last edited by luminex; 21-10-2009 at 10:03 AM.
how much for the exhaust from extractors to tip. and is it a single 3"??
whole skirt kit lol ?
Door trims have removeable trim cards, or are they solid like VR series 1? colour? price?
what colour is it? i need a rear bar
Trayner and NORTI - have got left hand skirt and rear skirt, dont have right hand and front is part of the front bumper which we have got. all are white but require repainting
V-ahhh - got rear bumper, color is white with red ss strip. in good condition except 1 crack about 2 inches long on top left side, will get pics up asap
-ToM- - Am guessing the trim cards are the carpet pieces near the arm rest. these seem to be one piece attached to the main door trim (Grey in color). We assume the car is series 1 because its april 94 (series 2 is sept 94?? any ideas anyone). pics available if requested, but trims are in average condition
VRSS and NORTI - The exhaust is a twin 2.5'. twin cats, through twin mufflers, then both through single rear resinator then exits through twin pipes to twin round tips. will get pics up asap
PM sent....
did it have cruise? i'm chasing this bit.
just the bracket that holds the cruise cable.
here are some pics of some bits and pieces.
UPDATE: after a closer inspection, we have discovered the front bumper is a standard bumper with holes cut for foglights and bezels, so there is no lip there. Rear bar apprears to be original with lower skirt screwed on and intact. Foglights and bezels, and a second set of foglights to suit vr are available except one pair of foglights have broken mounting brackets.
Have now got the full exhaust off, and have found that the seams of the cross over have opened up during the accident (As seen in picture), so we will need to get that welded up and re-alligned so its ready to bolt up. Reasonable offers considered. D&T qoute over $3000 for this system (Extractors through to tips)
Last edited by luminex; 26-09-2009 at 02:12 PM.
how much for front and rear seats?
the accident took care of the drivers seat, but we have the passenger and back but they are a bit weathered. can post up pics if requested
after the spoiler and an inside bit of trim, pm sent
-double post timeout on webpage, my bad-
would you be willing to take the rear lower skirt off , is so how much ?
is the exhaust stainless or mild steel? D&T quote $2650 for full stainless 2.5" system extractors to tips.
BUMP to the top. added more parts now guys...ask about any parts you might be needing...
cheers
where about are you located?
how much do you want for the K frame?
located in adelaide SA K frame is damaged from the accident and not saleable
cheers
positive buyer feedback left![]()