Twin piston VT brake conversion suit VN-VS
ITEM:
Up for sale is a VT twin piston brake conversion to suit VN-VS. It was intended for my car but i decided to go for a different kit.
Included is the follwing:
-2X Front VT braking calipers (s/h cond).
-2X pairs VT brake pads with plenty of meat left (s/h cond)
-2X VT rubber brake lines that come off VT calipers. (s/h cond) (have heard some people use these in the conversion but the lengh is slightly different so would recommend custom braided lines)
-2X VT-VZ brake rotors. Were removed from new vehicles that were sent to be made into HSVs. New cond. Genuine Holden
-2X Hub ring shims to allow the VT-VZ disks to sit properly on VR-VS commodores. New condition.
-VT 1 inch fast fill master braking cylinder. (s/h cond) Comes with VS resivour as to sit straight in a VN-VS.
-VT dual diaghram booster. (s/h cond) Included is a half finished custom braket to make the booster fit into a VN-VS. More work on the braket would be needed.
LOCATION: SA Clearview
CONDITION: New and Used parts
PRICE: now $200
DELIVERY/PICK UP INFORMATION: Pick up
PAYMENT OPTIONS: Cash, Paypal, Bank deposit
CONTACT DETAILS: PM, Ph. 0401852824
PICTURES: If requested
Last edited by cruzn; 16-02-2011 at 10:47 PM.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
If you were willing to post to 3175 in victoria, and the postage cost wasn't astronomical, I would grab this.
Can you let me know?
Sure i would try and get a price on postage tomorrow.
Postage to 3175 would be $40 via TNT road express.
Last edited by cruzn; 16-12-2010 at 09:59 AM.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
bump price drop now $200.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
hey mate would you post to newcastle 2290
tnt express is fine cheers
how much for postage to 3024 vic?
Sorry fo the long reply. Postage to Newcastle 2290 would be as follows;
$60 with Smartsend interstate courier 4-5 buisness days.
or
$65 with Smartsend interstate courier 4-5 buisness days $200 parcel insurance included.
Postage to Victoria 3024 would be as follows;
$40 with Smartsend interstate courier 4-5 buisness days.
or
$45 with Smartsend interstate courier 4-5 buisness days $200 parcel insurance included.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
how much would postage be to Port Lincoln SA 5606. any extras i will need for the conversion?
The WaJin: 1991 s2 VN Commodore WagonThe Shtato: 1994 VR Statesman
does this kit have the adaptor hubs to suit VN-VP?
If you plan on doing the conversion on any Commodore pre VR that doesn't have floating front disks then you would need hub adapters. If you are doing the conversion on a VR-VS Commodore then all parts are inlcuded.Originally Posted by AutoSnipe
Postage to Port Lincoln SA 5606 would be as follows;
$55 with Smartsend interstate courier 4-5 buisness days.
or
$64 with Smartsend interstate courier 4-5 buisness days $200 parcel insurance included.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
No it doesn't as the conversion was intended for my VR. It does come with the hub adapter shims/rings to suit VR-VS.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
Bump this up. $200..... The kit cost me more than double the asking price.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
hey dude could you COD it to me in NSW 2761?
No i cannot COD it to you as it is not an option with couriers. I can post it to you for an extra $44 or $48 with $200 postage insurance included.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
what extra work would be needed on the bracket?
Would need to be welded to a steel plate for reinforcement. Or you could just use your VS booster and easily cut off a couple of mm off your pushrod. Would bold up and work fine. Lots of people do it this way.
The VT dual diaphragm booster would work better though.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
Bump this up. Like i said before this kit cost me more than double the the asing price. This is a bargain. I have had a lot of interst but nobody has paid yet so it is still for sale. Given the asking price local pickup preffered but i will still post.
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
Bump this up
Never be afraid to try new things; remember amateurs build the ark while professionals build the Titanic.
Still up for sale dude ? of so how much for postage to 2761 ?
Posting Permissions
LinkBack URL
About LinkBacks
