vn bodykit parts for sale

[potshots007]

ITEM: selling some VN group a (i think??) front bumper, bonnet bulge and rear 3 piece spoiler, all fibreglass, unpainted, need a bit of work, but not too bad really, only removed from car because i got an aero front bumper and dont like the bonnet bulge or spoilers

LOCATION: items are located in Mildura,

CONDITION: used condition

PRICE: Make me a reasonable offer for the whole lot or jsut one bit you want, looking for around $200 for the front bar, about $50 for the bulge and around $150 for the rear spoiler

DELIVERY/PICK UP INFORMATION: most welcome to pick items up from mildura, or it could be possible for me to deliver to melbourne or ballarat area, or even bendigo around the 28th of april or so, for a little bit of fund, could quite possibly courier but buyer to organise the courier cos im hopeless with that stuff

PAYMENT OPTIONS: COD, direct deposit

CONTACT DETAILS: Email me at potshots007@hotmail.com , PM, or jsut reply to this post

PICTURES: not yet but will get some asap

cheers, nick

also wrecking a whole VN commodore sedan, V6, 5speed, at the moment i cant get rid of the motor or box yet as i still need it driveable, but yeah most of the interior still there, jsut an executive, not selling any of the shell though as i need the shell and rolling gear, but i will sell the motor and box at a later date, but want to get rid of all the interior parts, jsut reply to this post if anything you want

[potshots007]

just thought i would add some pics, and also noticed that there is a brake light thing that goes with the spoiler, not sure if it works, because as soon as i got the car i pulled everthing off, the brackets that hold the light on are broken but looks like the people before had glued it to the rear spoiler, the rear spoiler in the pic is just sitting there for the photos and is not mounted at all,

[vr-man]

might be interested in front bar. would you deliver to berri or loxton in sa riverland

[potshots007]

probably can deliver but not anytime soon, but i could possible meet you at like renmark or something, how far away is berri from mildura? any idea, a few hours? i might think about it

[Bz Kn33z]

What type of money would u be looking at for Just the Manual convertion? to auto VN.?
Does the bonnet bulge have mounting tab?
and wat condition is the console lid and how much? thanx

[potshots007]

i was looking for around $1000 for the manual conversion, pedals, gearbox, shifter, tail shaft, and flywheel (series 1 6 bolt) and clutch(only six months old) and whatever else you want with it, the console lid is in pretty good condition but on the inside it is covered in red velvet, looking for about $10 for that.

heres a pic of the bonnet bulge from behind its sort of got a lip all around where you would screw into from underneath

[Bz Kn33z]

So does the lid itsself have red velvet on it?

[potshots007]

not on the outside but the underside does, i will take a pic tonight if i can be bothered walking down the backyard.. :P too bloody hot up here

[potshots007]

ok went down and got a pic, oh yeah also noticed its got the hole where i mounted my cigerette lighter

[Bz Kn33z]

Whats the window surrounds like? how much?

[potshots007]

i will have a look after work tonight, from memory they were pretty good and i think they are a grey silver colour, but i will take some pics again, give you a price when i see what they are like............
well went out there tonight and they are in pretty good nik, i would say around $40 neg for the lot

[Bz Kn33z]

I was going to say i need a Passenger side mirror but it looks like it is red lol.
Dont worry i will be needing alot more so yea just have to make a list thanx
for the window surrounds Going to chrome em.

[potshots007]

yeah should look sweet, i did have a set of calais chrome surrounds but sold them a while back, and yeah passenger side mirror is red and drivers side is black, i couldnt make up my mind weather i should colour code or not, lol, but yeah most things are still there, roof lining is gone, headlight and wiper switches gone, interior light gone, but the rest is there

[potshots007]

ok, car is still here and i want to try and get rid of most parts or the whole car that is left, if anyone wants to buy the whole car, its a manual VN most parts are still there, looking for about $1500 for the lot, if not parts are going cheap,
box and everthing for an auto to manual conversion $800 pretty firm,
cluster done over 300k looking for about $10,
full set of seats about $50,
custom rear parcel shelf hand made from 19mm mdf 2 6x9" and 2 6.5" holes, no need to cut the steeel shelf to fit bigger speakers or make spacers, will want at least $50 cos i spent a bit getting it right,
got a full gas system but no tank want at least $150 for all that as the convertor is brand new and about 2 months old
V6 motor done over 300,000km has a new custom grind cam, i paid $350 its a wade came, i will find the spec sheet and put it up, brand new lifters, over $250 spent there on lifters alone, new inlet gasket, new belt, no a/c, looking for about $300 or wat ever your offer is
got full set of door handles $10
centre vents and side vents $10
still got the rear spoiler $100
front bar is still here $150 firm
also found these little guard flare things that go on the group a around the front guard or something, tiny little things that are, free if you buy something else, just let me know if ya want them
indicator switches $5 each got a few here i think
glove box $5
fuse cover flap thing $5

can post some of these things but pick up is easier, locate south mildura, north western victoria, or i can possible deliver some little things, but i want to try to get all this gone in the next month

just pm me on here or just reply to this thread or just email me items can be viewed on the weekend

cheers, nick

[potshots007]

also got a heap of VB commodore and VC commodore stuff i want to clear out, bumpers, grilles, i think i got a couple of dash's vents, seats front and back, blue, green, maroon, guards, boots, bonnets, some door glass, some door trims, just want to have a clean up, got a complete 4Kc toyota motor with a 4 speed box behind it maybe a 5 speed will have a look tomorro, it runs and i know this cos i had it in a datsun i was going to do up but scrapped the car and kep the motor was apparently recoed before i bought it, come on people let me know what ya want/need and i will get back to ya asap with pics, jsut make some offers on all this stuff and see what happens, oh yeah sorry for bumping up the thread again just im going to move out soon so want to have a decent clean up

[Kruza]

have you still got the bonnet bulge and ill have the little guard flare things you have for the kit i hambuying as they are missing from my kit

[potshots007]

yeah bonnet bulge still here and the little tick things for the guards $70

[xlr8_87]

how much (inc. postage to melb 3122) for just the light out of the rear wing???

[potshots007]

$25 sound alright? like i said the tabs that normally screw it on are broken and the people before must have glued it on or something as there is some glue residue sort of stuff on the light
but let me know if you still want it, everything going cheap now, people make some offers

cheers, nick

[Bz Kn33z]

Do you ahve anymore info on the cam where u got it? the specs what stage and was it a cam and chip package?

[potshots007]

hey there, its a wade ground cam for series 1 v6 only, ive got a spec sheet here which i just found, i will scan this sheet and upload, i think its only a mild cam, maybe stage 1 or 2, i found it to be a really good cam, had a really nice note and was pretty good on fuel, i will also throw in all new lifters that are maybe 6 months old as is the cam, i would like to get at least $250 or close to as the lifters alone are $250 worth and the cam cost me about $250 but yeah i will upload the spec sheet tomorro

cheers, nick

[Bz Kn33z]

Did you get it local will you have to retune the computer?

[potshots007]

i did get it local, i got it from MAE, and i had no computer adjustments at all, all i did was dial it in put the chain on and put it all back together, the only mod i had was a custom exhaust, but i must admit i found a noticeable difference from standard, but if you did get a retune to suit the cam it has heaps of potential

[Bz Kn33z]

is it close to a wade 992

[potshots007]

cam profile is 1250, similar to a 992 but the 992 is a bit more lumpier, so im guessing i got a stage 1 cam