Stockys shed clearout - VN-VS parts

[stocky]

Have too much stuff filling up my shed. Im listing what i can remember for now, and will update more later. Pickup from wantirna, vic. postage available on smaller stuff

SC14 SUPERCHARGER KIT. Complete or in pieces
-8 PSI CRS kit (t/b after charger. missing one mount. easy to make but still works fine without) - $1000

• sc14 supercharger
• 8 psi pulley(when intercooled), and will throw in 3 psi one if wanted
• belt
• brackets
• piping
• leads
• pod filter or modified airbox
• 1 bar eprom tune, possibly memcal

-manifolds to move t/b before blower, with kick down/accel cables and bracket -$350
-2 bar map sensor, 2 bar eprom tune and memcal - $80
-intercooler piping with silicone and clamps, suited for 300x600 intercooler with 3 inch ends - $500

INJECTORS
-39lb/hr injectors x6 - $300

ENGINE PARTS
-V8 throttle body. 65mm with all sensors attached. $100

EXHAUSTS
-complete v6 exhaust. genie headers, HM headers twin cat 2 1/4 exhaust, chrome twin tips (catback RRP $850, used for 3 months from new) $700
-hsv 5 litre headers with oxy sensor - $120
-IRS catback. 2.5 inch with no centre muffler, hotdog on rear, twin chrome tips - SOLD

DRIVELINE
-Auto box out my VN V6. Stage 2 shift kit, corvette servo. Has no 3rd gear due to oil loss. Might be an easy fix, cant say. $20
-Damaged VR V8 K-frame. dunno if it can be repaired or not. only damage was a slight dent on the front left. $20 SOLD

SUSPENSION
-VN Control arm and castor bar - $10
-VR Front left strut - $20
-VL Diff parts - housing, axles, brakes, centre with no gears. $5 a par
-IRS rear springs. Compressed factory springs. sits lower than king springs SSSL - $20

BODY PARTS
Genuine HSV VR/VS Senator rear bar. 3 piece. sherbrooke green. needs respray. small damage near exhaust outlet. $60
VR/VS Sherbrooke green bootlid. suit VS HSV spoiler. minor damage and scratches. no garnish. $20

INTERIOR
Various parts for VN-VP. Ask if you are after anything. Have an entire VP interior to get rid of including dash, seats, etc.
Centre console. VN. Sprayed silver. $10
VN berlina door trims. holes cut in front to suit VR door pods - $20

[pugga]

i'll take the rear bar stocky, wouldn't have the side skirts by any chance

Thanks

[stocky]

nah havent got side skirts. ill get a photo of the rear bar soon. the exhaust hole has had the sides trimmed for an exhaust or something. stupid people

[pugga]

Thats alright for $60 i'll take either way, don't need a pic

[clubsprt]

just wondering if you have one and if so how much, cheers

[LightningVP]

Wouldn't happen to have the middle section of a VP lying around would you?

[vn calais manual]

im still after them brackets and adapters mate.

[stocky]

Wouldn't happen to have the middle section of a VP lying around would you?

yep. sure do. what parts you after.

[azkwazere]

did ya get my pm?

aZk.

[stocky]

yeah sorry got it. looks like im gonna sell the charger with the smaller pulley on it, so ill adjust the prices to suit. cbf getting a puller to get it off

[stocky]

bump. just remembered i have a stage 2 shift kitted auto with a corvette servo. it has no 3rd gear because it lost a bit of oil at one point. its probably fixable, doubt much is wrong with it. $20

[2L8-I8U]

hi will the stage 2 shift kitted auto with a corvette servo fit a vn. i got a vn that needs black seant if u have them

[stocky]

yeah its out of a vn series 2, but as said, it will need repair before you put it in. not really drivable with no 3rd geard

[stocky]

IRS catback exhaust sold pending payment

[SAMO-87]

Hey stocky,

Do you have those quarter window trims I asked about?

Cheers,
Sam

[stocky]

oh yeah i do sorry. been a bit busy lately and getting slack with PMs. hows $15 for them sound? may have a VP parcel shelf or are you after a VN one?

[SAMO-87]

Yeah, sounds good to me. How much would you want for the parcel shelf?

I could pick it up tomorrow after work if that suits.

Cheers,
Sam

[wildss]

got the carpet? whaT color is it/how much?
i promise i wont send stewart this time lol

[LightningVP]

yep. sure do. what parts you after.

I need the middle part of the exhaust with muffler

[seraphic06]

You wouldn't have a level 3 dash loom laying around would you?

[tr3nt]

-IRS catback. 2.5 inch with no centre muffler, hotdog on rear, twin chrome tips - $80

fckn sounds good mate, cheers!

[GyolesVRSS]

ill take the rear bar and headers + post to 2641 (Albury)

[stocky]

You wouldn't have a level 3 dash loom laying around would you?

yeah i got a few. do you just need the 4th connector?

ill take the rear bar and headers + post to 2641 (Albury)

gotta check if pugga wants the bar. he might change his mind after seeing the pictures. not sure how much postage would cost to albury, if these can even be posted. they might be too big, but probably around $30 shipping

ive been a bit slack with PMs lately if anyone has PMd me. too busy lately

[SLO 057]

complete v6 exhaust. genie headers, HM headers twin cat 2 1/4 exhaust, chrome twin tips (catback RRP $850, used for 3 months from new) $700


you willing to separate the headers?
and postage to 5159
cheers matt

[wildss]

got the carpet? whaT color is it/how much?
i promise i wont send stewart this time lol

??????????