Turbo V6 VR

[Fast_VR_Boy]

Hey i recently bought a turbo set up and everything else needed to pump my hp up and im planning on taking photos every step thru and showing u all how its done with the help of the forums and some members i should have it in over christmas

[fitzy2005]

Sounds good.
What have you purchased?
And how much has it cost so far?

[Fast_VR_Boy]

the turbo kit cost me 2100, that includes
-T3/T4 turbo
-Intercooler piping
-Intercooler
-Silicone Joiners
-2 BOV's, a plumb back and atmospheric
-manifolds
-3" dump pipe from turbo to cat
-oil lines and fittings
-Smoked Guages and surround which fits below the stereo (Oil pressure, boost and oil temp)
-Boost controller and Vac lines
-24lb Blue top injectors
-heat wrap
-16" slimline thermo fan
-All nuts and bolts and clamps

I also bought 42lbs injectors and a 255L/H fuel pump and which cost me about
$350 - $400 for them.

i also bought a 2Bar Map sensor and it cost $50

Things i still need is a dyno tune, and ill throw on a new 3 inch exhaust and high flow cat which will be $????

So im looking at about $2550 - $????

[LowVp]

what ecu are you gonna use??

[Fast_VR_Boy]

what ecu are you gonna use??

havent decided yet, what u reckomend?

[LowVp]

haltech or kalmaker, both are plug in replacements for the stock ecu but what from what people have told me is that the haltech seem to be easier to tune. so thats what i went with

[Fast_VR_Boy]

Turbo kit UPDATE -

Tubo kit Arrived ready to bolt on
2Bar map sensor ready to install
42lbs injectors bought and ready to install
500hp fuel pump bought and ready to install

Currently talking to Brad at Enhanced about Cams,valve springs and Surge tank so it might have a bit of go in her before long!!

Keep you posted

[sackvp]

where did u get the kit from

[LowVp]

he bought from another forum member who bought it from ebay, as well as i

[vsuteLs2]

that sounds wikkid. lets us know when its all fixxed. i wouldnt mind putting an alloytec in a vr/vs and chucking a turbo on it. it would be insane