fitting efi 202 from vk into torana. anyone wanna give me a few pointers.

[vktorana]

ok engine is in but fuel not being injected. got fuel in the rail with plenty of pressure and plugs are sparking but no fuel in the chamber! PLEASE HELP?

[ari666]

any suggestions? other than the one that goes: this thread be better suited to the VB-VK section

[vktorana]

yea its in there too but noone posted anything. na i got no idea whats goin on. the engine ran a dream before i swaped it and used all the same wiring loom its basically the same engine just in a torana.

[VKCOMMO]

if no one posted just say bump...

[vktorana]

lol bump? whats that?

[ari666]

bring up my post (bump)

[vktorana]

lol ok and how would i do that? anyways i just want some help with me car lol im so over fitting the interior right now. need to make some progress with the engine.

[ari666]

you type "bump" into the text box and press the "post quick reply" button

[vktorana]

lol it tells me the msg iv put in is too short! i just tried it lol

[jakbob]

Sounds like the injectors are not firing, which means something is amiss with the wiring loom or the computer. Did you disconnect the battery before you pulled the computer from the old car? Apparently if you disconnect the computer before you disconnect the battery it kills them.

[vktorana]

the compoter never got disconnected at all so yea the battery would have been first. i labled every plug and lead that came apart so they all wend back exactly the same! there is a current to the injectors because i pulled the plug off and tested with an electrical tester.