trent was 'ere
my continued struggles
http://cgi.ebay.com.au/ws/eBayISAPI....2521%26fvi%3D1
My mate saw that for me last night. Is it true that the 'mission won't fit into my VR?
Originally Posted by hakhawk
Site Administrator
As far as im aware there should be no troubles with it. Both use the 4L60E, both have the same trans tunnel, this would leave you to believe they both use the turbo bolt pattern..........Not sure mate.....
AirStrike
Selling FG G6E Turbo and buying a N/A Supra
trent was 'ere
no offense, but can I get a more solid response.. im thinking of going to get a few hundred in a loan and steal that transmission!!!
Clearly your car is auto. The VS Series and the VR Series only used 1 type of automatic transmission. Therefore, unless this 'mission is not VS it should fit fine in a VR.
trent was 'ere
mate, you just made no sence.
can I get an answer?
Unless that 'misson on ebay is not a VS commo 'mission.. Then YES that transmission will fit in your VR.
trent was 'ere
why will it not fit a VR Exec?
America just kicked in yo
I think what he's trying to say is that it might not be a VS transmission at all, email the seller and get them to check the ID tag on it and make sure its a 4L60E.
========My Statesman 20's Mafless and 3.9's========
trent was 'ere
Question about the number on the plate has already been asked.
Oh for God's sake. Plain English for you. YES THE TRANNY WILL FIT YOUR VR.
trent was 'ere
THANK YOU.
Mate if you had noticed the thread, thats all I was ****ing asking.
cheers.
is there anyone that doubts it will fit?
455rwhp LS3
I would check that it is not a software difference between the ecms. physically it will fit.
i dont understand why anyone one even tried to help you out with info tr3nt...all your posts on this thread are just abnoxious and rude.
the guys here were just doin the best to help you out and your attitude to their responses was completely out of line.
trent was 'ere
im sure in my situation you would have done the same. I apologise if someone was offended or anything like that, but think of it this way.. I urgently need a car on the road, I needed an answer in a limited amount of time - I was actually in talks with the transmission owner at the time.
I got caught up in the heat of the moment, but be damned if im going to be told by another MEMBER how to post on this forum. I will accept it if I am told to calm down by an admin/mod, but not a typical posted like yourself.
well if you had of cooled your jets and read the replies thoroughly your question was answered many times over.
and i dont care what or how you post on this forum man im just givin some good advice on manners and curtesy...even if i am just a member.
Transmission originally purchased interstate for a VR, but as it's for a VS, it does not fit my car.
Considering the bloke bought it for his VR and it doesn't fit................ I think he answered your question in the ebay add......... I personally wouldn't risk it... although you could ask a transmission place.
" Behold the turtle. He makes progress only when he sticks his neck out "
Got Evo?
What about the toolbags at holdens can they shed any light on this problem for you tr3nt? I dont know how game id be to buy something im not sure will fit, doesnt sound like this ebay seller really has much of an educated idea, hes just reading whats on the tag.
trent was 'ere
I had read the posts myself, and thouroughly, but some of them didn't make sense!
Thats why I was a bit stumped, the transmissions in the VS/R were practically the same to my knowledge?!
The seller has rung Holden up, they say it will fit and work in a VR Commodore. However, he has also contacted an independant mechanic and they say it wont! I am going to contact my mechanic and ask him myself.
Just a general Question.. Why did you start this thread? You asked for an answer.. you got one.. you then are asking someone else? What the? This Thread is useless...
trent was 'ere
to be honest, there weren't any answers which I trusted, thus why im turning to my mechanic!
<---Brad Quaid = internet stalker
righto drop the shitfight or ill close the thread....
only human......
Well All gear boxes will bolt up and will drive most time but never be 100%
VR Series 1 Will only Suit This Series as Lock up in ON/OFF
VR Series 2 Will Only Suit This Series as Lock Up is PWM and 3/2 Shift is ON/OFF
VS All Series Will Only Suit This Series as Lock Up is PWM and 3/2 Shift is PWM
VT All Series Diffrent Shape and Output Shaft Length aswell as Selector is diffrent.
only human......
this makes no sense to me either, but it's hard fact from a guy who tinkers with these boxes all day every day
America just kicked in yo
I don't trust local mechanics, They always try and pull a shifty on ya (will say somethings stuffed if its not, or if somethings difficult for them they say it can't be done) bloody holden are just as bad. Hmmm our choices are limited if we are not handy with a spanner.
========My Statesman 20's Mafless and 3.9's========
trent was 'ere
my mechanics real good, I known his son through all high school, and i know his other worker, im good mates with htem..
seriously though people, will that transmission fit and work in my VR SERIES ONE. As you can see it has 0 bids and $100 starting bid!
http://cgi.ebay.com.au/ws/eBayISAPI....DME:L:RTQ:AU:1
I need to know urgently!
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote