I have remove both front CV driveshafts from my Holden Barina but I'm not sure about getting them out... I put the car on stands, removed both wheels, drained out the gearbox diff oil ...... but I dont know about removing any front suspension or hubs.....
wheel off, tie rod end disconnected, control arm joint separated,split pin or circlip removed from stub axle, fuggin big nut unscrewed from stub axle, pull strut towards you and push driveshaft towards the gearbox and to the right of the wheel arch then slideit out carefully making sure not to tear the transfer case driveshaft seal....
rough idea on how things go