netcomm smart i share modem sm4200

[shonky12]

hi guys, following the network modems, i now have a netcomm dialup smart i share sm4200 modem, all 3 carrier detect, active and data lights flash at the same time and i cant get into the configuration page to set it up and reset it again.

first i was able to getin to the page to set it up and i was able to change the password/user name using the ip address to get in but the internet wouldnt view any sites.

then i tried to reboot it and change the settings but now i cant get into any pages even the configuration pages. can anyone give me some advice on setting it up so the internet works.

thanks for any replies

[hakhawk]

Whirlpool - Australian Broadband News

post up in there,might get more response

[Boonz]

i had a netcomm router doing what yours is doing, all the lights worked but still nothing happened... the router ended up being faulty after 2 years of use...

one thing to get checked out before you go crazy with trying to get it to work yourself....

[shonky12]

does anyone have firmware for a netcomm smart i share sm4200 modem because i want to have a go at updating the firmware

[vy_storm]

does anyone have firmware for a netcomm smart i share sm4200 modem because i want to have a go at updating the firmware

Take the advice from above and try another forum, this is a commodore forum after all.