VL ****ed anyone know how to do up a whipper snipper motor?
my car is just about ready for scrapping so ive decided to make a bike with a whipper snipper motor on it and i wanna get mine as beefy as possible.
lucky for me i work around the corner from my house, but i couldnt be bothered pedalling up the hill.
i know a smaller wheel climbs hills better and a larger wheel goes faster.
i just wanna know of any mods you could do to a whipper snipper engine to make it fully sick.
on holiday
you can buy fully supplied kits on ebay mate my neighbour has one comes with all things needed for $300 ish dollars search mountainbike moped get engine exhaust chain sprokets everything has a real clutch etc
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
Moderator Puppeh
i was kinda hoping to not have to pay for a new engine
but i did just see one on ebay and it looked pretty good except it was 48 cc (the pigs give you shit if its over 27)
my mate builds them all the time but he moved up to newcastle he was gonna build one for me.
ill keep you posted on my progress. anymore suggestions would be helpful.
maybe when k rudd stimulates me i can get one of those kits
on holiday
they dont have the CC rating on them so they could be anything on the inside the feds wouldnt know over here we can goto 50cc.its a moped so look up the moped laws over there in your state
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
yeah its 27 here (nsw). my mate who makes them has been to court 3 or 4 times because of them (got off every time) i think im gonna drive it with a wheel rather than chain because im going to mount it with a hinged bracket so you can lift the motor off the wheel and pedal. the cops prefer that,
I'm currently doing this but on a old birtbike frame with the whipper snipper motor.
And a while back on hard rubbish i found the whipper snipper and my step dad gave me a chainsaw motor (dident work) but i took the carby off the chainsaw motor and made a Double carby on my whipper snipper but i havent tryed it yet.
so just wait till hard rubish and someone will be throwing out an old motor.
Growing Old Disgracefully
If you can get one of the whipper snipper motors with a centrifugal clutch, it will work better. I had an old McCulloch whipper snipper i was always going to use, but it blew up on me and i bought a cheap GMC one... so when it dies, it gets turfed out. I think the law also states that the vehicle should not be capable of speeds over 30kph as well.
Reviled did i live as evil i did deliveR
- UNDERSTEER is when you hit the wall with the front of the car.
- OVERSTEER is when you hit the wall with the rear.
- HORSEPOWER is how fast you hit the wall.
- TORQUE is how far you take the wall with you.
Growing Old Disgracefully
i know this is probably fake.... but it's something to aim for
YouTube - Nitrous scooter
Reviled did i live as evil i did deliveR
- UNDERSTEER is when you hit the wall with the front of the car.
- OVERSTEER is when you hit the wall with the rear.
- HORSEPOWER is how fast you hit the wall.
- TORQUE is how far you take the wall with you.
Growing Old Disgracefully
Reviled did i live as evil i did deliveR
- UNDERSTEER is when you hit the wall with the front of the car.
- OVERSTEER is when you hit the wall with the rear.
- HORSEPOWER is how fast you hit the wall.
- TORQUE is how far you take the wall with you.
a guy off ausrotary built a pushie with a turbo victa motor, carb was in front of the turbo and it eventually ran very well after soem fine tuning.
check out off topic on ausrotary if that interests you
05 VZS UTE
Search some of the zennolith or RC boat forums, those guys make insane power out of the 28 and 33cc engines.
MIX'D N MATCHED SUSPENSION TRYING TO MEET SA REGS.
AMG VOUGE RIMS 19"
FLASH TUNE (Waste of money, did bugger all for $800) M.C.A.I MOD
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
