Raptor Superchargers on a worked 93 vp3.8ltr

[scouser king]

g'day all,is it possible to fit a Raptor Supercharger Systems to worked 93 vp 3.8ltr motor here so info
1 X FULLY RECONDITIONED LONG ENGINE .
REBORED AND HONED TO PERFORMANCE TOLERANCES.
CRANK GROUND AND LINISHED.BLOCK HOT TANKED,DECKED ,NEW WELSH PLUGS, BLUEPRINTED.
HEADS FULLY RECONDITIONED ,NEW VALVES ,BRONZE GUIDES,3 ANGLE VALVE GRIND, BACK CUT VALVES,BOWL PORTED AND FLOWED.
SUPPY AND FIT NEW CAM BEARINGS.
1 X SET ACL PERFORMANCE PISTONS AND RINGS.9.5 :1 COMP
1 X SET ACL MAIN AND CONROD BEARINGS.
1 x Clive Roller 228 @50 Hydraulic Cam 3200 to 6700 rpm.
1 X SET OF PERFORMANCE VALVE SPRINGS AND RETAINERS .
2x Performance 70 mm throttle body c/o.
1x Performance chip to suit cam listed c/o.
1x Rollmaster Red timing chain and gears SINGLE ROW
12 x Hydraulic lifters( NEW ! NOT RECO)
1 x FULL GASKET SET
1 X SET YELLA TERRA ROLLERS STD RATIO.
1 X 3500 STALL CONVERTER TO SUIT T700.
1 X TWIN THROTTLE BODY MANIFOLD
6 x GROUP A INJECTORS CHEMICALLY CLEANED ETC
only done 6,000kms

[immortality]

nice, but possibly not ideal for a supercharger. that cam wouldn't be blower friendly me thinks, probably has a lot of valve overlap (tight LSA).

if you post up the rest of the CAM specs Tim will be able to give you a better idea of what will work.

that CR is only .1 higher then the ecotecs so that should be fine

[vn calais manual]

sounds like an SRE engine of ebay? pending on cam specs it should be fine mate. did you get a cam card with your engine?

[scouser king]

yes its the stage 5 SRE engine of ebay ,but i lost the card =(

[Raptorsc]

As mentioned we need the cam specs, apart from that its a good thing for boost.