Who has the tuffest Raptor v6

[ADDICTVY]

Who has the tuffest unopened ?

Who has the tuffest opened ?

And what are the mods for both?

[Raptorsc]

I guess with the toughest section its all about the dyno results, I put strip results in other post.

I have a customer in Melbourne with a VY V6 - big cam, 9psi boost intercooled 241rwkw, stock bottom end. Manual trans

Hoff from Street Comms has 325rwhp with ~11psi with cleaned up heads, stage 2 cam and intercooled, auto trans

I have another customer in Perth, he had it tuned there, made 245rwkw with watermeth kit and some serious tuning. Motor mostly stock but excellent exhaust system.

Another VU V6 auto from Adelaide with 224rwkw, totally stock motor, 11psi and Haltech with custom tune and cooled.

All the above have high lifter rockers so far I know - various brands

Rdtrippin - VS V6 manual sedan stock bottom end with Raptor generic tune and intercooler 11psi 222rwkw

There are a lot of Raptor charged ECOTECs around 200rwkw and many are not intercooled. Will usually pull a couple of runs at high power before the heat brings them back a bit.

I have forgotten more than I can remember but thats a small sample of them

Then there are the 4.2 and 4.3 strokers

A few new numbers have been cranked out lately but not sure what those numbers are

[vs-6]

i reeled off a 290hp today which i thought was pretty good i was hoping for 300 but yer 290 will be fine... for now

[Raptorsc]

That would be 216rwkw which is good stuff

There are some wicked cams you could add down the track to bump that up another 20 no worries

A big gain I reckon from where you would have been at even a month ago

[vs-6]

yer well i took a 2weeks off work to get it all happening so yer outcome was pretty good

[psivyv6]

vs-6
do u have a full list of mods? and ur vs auto or manual?

[vs-6]

auto
corvette servo
boost valve

roller rockers split ratio's
3.45 diff gears
12psi pulley think im getting about 11 in maniflod
dual 2 1/4 into single 3'' exhaust
3'' intercooler piping obviously intercooled
reverse plenum
nothing to interals of motor (except roller rockers)
walbro fuel pump (only because mine is very old and i got it for 180 bucks and was able to install myself)
when the tuner tuned it all he pretty much did is change shift points and throw more fuel into motor so i possibly could have got a bit more but i want it reliable as its my daily driver