Holden V8 304 EFI

[Raptorsc]

XCOP

We wouldn't recommend our blower for that application, we are pretty sure you want a lot of pressure for that nice motor to make it all worthwhile.

Our Raptor R is not currently in production so best thing is to recommend you to one of the opposition companies on this score.


Hoping we can help with this in the future

[AirStrike]

Do you have any better engine bay pics mate?
AirStrike

[greenfoam]

That must be the slowest clubsport that's ever been made, you sure there's nothing wrong with it?. Anyway I suppose it will all be fixed with boost

Then again I suppose they were loaded with power everything

[Raptorsc]

Greenfoam

It seems to be in very good condition with only 130 000km on it, no problems that we can find at all, of course some boost will bring it alive

[Raptorsc]

Airstrike

Better images coming in a few weeks, should be finished images, will be very keen to show you them

[Dan355]

Could you possibly adapt the kit to run with comes ttb manifold?

[Raptorsc]

Originally Posted by Dan355

Could you possibly adapt the kit to run with comes ttb manifold?

You could adapt the kit to that manifold intake system pretty easy if you wanted to.

We would like to test a system on a 355 stroker before we go all out recommending them. We know the V handles the LS1 engine fine, and the 304 extremely easy but would like to test it on a highish RPM 355 before we recommend it to you.

[Peanuts Inc.]

hows the 5 litre kit coming along??? got some more info and pics for everyone yet???

[Raptorsc]

The latest information ........

The kit has been completed to 98%, the customer is away now for a few weeks picking grapes or something Just finishing off the alloy crank pulley and intake to blower. The one piece is being machined and the other we do ourselves.

We haven't taken anymore images other than those on the first page of this 304EFI thread.


The car isalready booked for tuning on the 7th of December with the extremely capable tuner Tim Sheather of Electronic Automotive. There will be results very shortly thereafter for the ProStreet Kit.

Thanks for asking and you are welcome to bug us anytime to check that you have latest info

[AirStrike]

Have you looked at making a crank brace to suit these at all?
At present what is the maximum amount of boost that you can safely squeeze out of the raptor?
Are you going to offer an intercooled setup?
AirStrike

[shanhsv]

So wat are the chances of pushing this kit to make 320kw or so.I was looking at the bolt on kit from C.A.P.A which takes a 165kw motor to 320kw.But at 7k im betting you guys can do something similar for less if you looking at 300kw for less than 6k

[Raptorsc]

We will certainly be under $7k and the power level will be close to identical, there will be major bang for the buck from this kit. Hope to post up the power gains here after the 9th of December all being well.

[STEALTHY™]

Hey, is there much chance of a stealth charger setup, one that replaces the manifold, but so you can use the covers still.