Raptor for Holden Red, Blue and Black motors 6 and 8 cyl

[Raptorsc]

It would seem that we only deal with later model Holdens but that is not the limit of what Raptor can handle!

We do not have kits for the earlier engines however if you are prepared to do the work Raptor will certainly supply you a supercharger and some information to assist you with setting up an older engine for boost.

Raptor V supercharger unit will easily boost the following engines to 10psi

GM - Holden

All RED 6 cylinder engines
All BLUE 6 cylinder engines
All Black 6 cylinder engines

and same for all the V8 series

[Shifty1]

Hey

Im looking for information on supercharging a Blue 6cyl engine. I can get a supercharger but am unsure of which would be best for my application. Any suggestions? Also, this car runs on straight gas.

Cheers

[Raptorsc]

We have had a few phone enquires on chargers for RED and BLUE 202's this last week, essentially we can supply the SC plus details of what has to be done, its very easy if you choose to go blow through with a Holley or similar.

Also works out quite cheap if you get mates rates on machining etc.

[JD]

just wanting to know a few things
the raptor v supercharger with everything needed to install and run for a 253 how much roughly?
the engine was rebuilt 30k ago so no probs with that?
how much do u expect to gain roughly?

thanks in advance

EDIT: its a blue 253 if that matters

[Raptorsc]

JD

All good questions, we do not produce a kit as such, your motor will be fine but its about how you get kitted out.

You will need a crank pulley (6rib), an auto tensioner, a bracket, a small amount of pipe work, a high pressure fuel pump, a RR FPR and lots of little bits and pieces, also a Holley modified for blow through operation (nitrophyl floats). If you were closer we would take it on as a custom install ..........

You could try sending us some photos of your engine bay and we can talk about the possibilities. raptorsc@westnet.com.au will get our attention.

[Raptorsc]

We have a couple of people now fitting Raptor V to the Red and Blue motors, one is intercooled

Will post up results, will be a little while yet before they are done

[SlapNuts]

i'll also put my hand up for wondering about your blow through setup, as i have a freshly rebuilt red 253 waiting to go into a landcruiser

[Raptorsc]

You gotta see this cool Red Motor at first start up with Raptor V + Intercooler and huge external BOV

YouTube - HR Holden Intercooled with Raptor V

[Xadous]

Do you have Dimensions for the brakets and so on
for fitment on a red 202?
Also the pully for the front would you guys beable to machine one to suit or have any sugestions

[Raptorsc]

We could do this, I would get an old red motor and make a kit up, what is your motor in??

[Xadous]

its in a Vh commodore
So there is a fair amount of room

[Raptorsc]

So we could hang it on the drivers side you think?

[Xadous]

Yea same as the Eh im thinking