Raptor Specials, 2nd hand or other

[vs-6]

i am selling my vs commodore with a raptor supercharger if any1 is interested

i am in WA make an offer pm me...

[Tadgh]

No dramas, ill hold off on the manifold for now. With the compound charger system is there a need for engine work or will a standard engine hold for now?

i would build one for it fabz i doubt it will handle much more than 14psi stock. But hey bolt it up and see how long it lasts

[The Darkness]

dont suppose you have any of the better powerdyne chargers.i believe i have the belt driven one at the moment and wanna change it to the better gear driven model for more boost. or if i take cover off mine and find that its something different a rough price for a reco

[Raptorsc]

Believe me, you don't want the gear drive XB, the BD11A is not such a bad thing if set up correctly. How many psi are you trying to get from yours and what would you like to get from it.

Does your air filter have enough capacity for the charger, is the inlet pipe the correct size and much more. Also what rear wheel power have you measured and what supporting mods like exhaust etc do you have?

[The Darkness]

would like run at max of round 12-14psi with a stroker motor or whatever is the best i can get out of it. it has an intercooler setup andi believe is running the stock pully/impeller. no idea of motor power as the charger setup is not creating boost so something in the system isnt right hence reason for getting charger replaced/rebuilt and strengthened. trying to get it checked out asap. has extractors, highflow cat i think and 3 inch exhaust. bigger fuel pump, vortech rising rate reg, blue top injectors{dont know what pound}. pretty sure its 3inch piping on the cooler. only had the car 2 weeks so just sorting it all out. has pod in front bar then goes to charger then through cooler to manifold

EDIT. just been looking on 928 motorsports site and there "Super-Powerdyne rebuild" seems like the gear i want. http://www.928motorsports.com/parts/superpowerdyne.php . what would all this cost me. rather not send it overseas

[ADDICTVY]

For sale raptor Sc kit minus ecu. i brought from tim 6mths ago never been used . I want $3200 with is a good deal. pm if interested

[psivyv6]

Y u selling already mate?

[ADDICTVY]

got an ls2

[mad055]

what is the kit for? 5litre????

[Raptorsc]

Kit is for ECOTEC

So far I know there are hardly any if any other Raptor kits 2nd hand anywhere at the moment, so here is one for sale - contact ADDICTVY

[17UCK!]

this is an ecotec kitt..... was on a vt 3.8 .....selling a vortech v1 blower kit ( for a mate pm me if interested) its a full kit, just missing an intercooler.. comes with all interc00ler pipe work(fat pipes) blower brackets, blower, injectors, pullys, belts, bov.. as i said full kit it... was on his car running fine untill he crashed it. intercooler got damaged ( why its not included)

the blower is set up 2 run off a second belt, comes with all the pullys for this. any questions pm me

$3999 or make a deal ( ALSO KEEN ON A MINI BIKE 150cc 140cc ect )

[Raptorsc]

17UCK

There is some inconsistent information there

All Raptor kits for V6 only use 1 drive belt (Capa kits use 2 drive belts)

All VT V6 are 3.8 liter not 3.6

Please make all the information spot on, feel free to edit your post so people know for sure what you are really selling.

Is it a CAPA kit? Also is it 3.6, 3.8 or what??

[17UCK!]

haha typo on the 3.6 lol, but ill find out 2day if its raptor or capa, i got told it was raptor. but ill get bak 2 ya

17UCK

There is some inconsistent information there

All Raptor kits for V6 only use 1 drive belt (Capa kits use 2 drive belts)

All VT V6 are 3.8 liter not 3.6

Please make all the information spot on, feel free to edit your post so people know for sure what you are really selling.

Is it a CAPA kit? Also is it 3.6, 3.8 or what??

[Adriianz]

anyone got any kits for a vt v6 currently, looking for one local to vic melb, and hopefully someone that can install also . want full package.

[ADDICTVY]

mine will fit. all you have to do is ring chiptorgue and say i want a chip and your good to go. there $850. plus 3200 for the kit. and you have a brand new never been used raptor kit for $4050.

[MR_VX]

worth getting to i love mine on my vx

[Raptorsc]

AddictVy

Good advice there. I can confirm that the kit offered by Addictvy is BRAND NEW, all parts are new.

Always selling for $4990 - $5300 new so there is a saving there.

Normally the warranty is 12 months from first invoice date only , in this case the buyer of ADDICTVY's kit will have a NEW Warranty starting from date of purchase.

Ask whoever buys the kit to contact Raptor directly to lock this in, if we don't hear from them then offer is not valid.

[DeathVZaudiO]

VZ v6 exec. Price on a full kit if u have one please mate and how much to get it to Melbourne if possible. Cheers

[Raptor Charged VX]

some one should jump at the raptor kit for sale, they are a great reliable power for the v6

[Raptorsc]

Will unviel the Hybrid in the next week or so, slowly progressing through the machining stages on 2 of them, 1 is going onto a C5 Vette and the other onto a Porsche of some sort

[ADDICTVY]

Yeah thanks raptor.

[Raptor Charged VX]

For Sale, Raptor S/C pre set BOV 32 mm big valve for I/C set up , never been used, asking $100 bucks can supply bolt up flange for extra $50 but u still need to weld it to ur pipework,

brisbane area,
PM me if ur interested

[ADDICTVY]

raptor supercharger is sold.

[Raptorsc]

Good work

The buyer has contacted me for his Warranty extension, which will be sorted in due course. All good.

[ADDICTVY]

thanks heaps for that tim. there is not many businesses out there that gives there product 110% anymore and its a breath of fresh air. when i get my 5l running you will def get my business. Good luck