Search results

Hey guys, So I managed to get my hands on an m80 lsd center that I have been told needs to be rebuilt. I know you can machine the cones and shim it up but it won’t last very long. I also found some Borg Warner 31 spline cones and was wondering if I could use them as a direct replacement for my...

Hey guys, So I have a set of ve Calais 18s that have a nice flat rim surface and I bought them polished allready. I use mothers polish to polish them but am sick of them getting oxidised the seccond something touches them or 1 drop of water falls from the sky. And even just sitting in the garage...

Hey guys, I got a s pack bumper from the wreckers for my car and it had only one fog light insert. I’m not really interested in putting in fog lights unless all models had the wiring in place and all it takes is to plug them into the harness and put in a fuse/relay. If it isn’t that easy I need...

Oh awesome that’s close to me, yeah mainly just need my srs cleared as I changed to a pack seats and forgot to drain battery before disconnecting the seat. And I also want to clear all codes and see if there are any once I put in my tuned ecu just to start from a good start. I don’t know how to...

Hey guys, Just wondering if there is anyone in south east melbourne who is happy to clear and check codes for me? If you can that would be great and just name your price.

So I did the reset by removing the negative terminal, then turned on the headlight switch, pumped the brake a few times and tried to move the power seats Then waited 2 minutes. The car was allready warm and usually likes to pop a couple times when you start it when warm and when you rev it...

Ok I don’t know how to close a thread or to label it as solved or something but I figured it out myself the issue it was the actual lock knob on the interior was not getting pushed far enough by the mechanism causing the shock of closing the door to cause the mechanism to register it as closed...

That I have seen actually! Im lucky enough to have had a dad that loved to watch all the classics with me as well as kids movies when I was little.

This seems accurate enough. Seems like I am the only one on the forum that isn’t old enough to remember peter brock being alive.

So, I have an obdII scanner and it did not work on my series 2 auto sedan and after digging around the forum I found it uses obdI/ALDL. Is there some way I can not have to spend 80 on eBay for one or is it worth the investment. And is there somebody in vic that had the cable and software who is...

How would one go about this? I assume you are talking about resetting the pcm memory as it has learnt to run optimally with the regular intake therefore cannot a just to the new intake. Would I be correct?

Yeah I have asked in a couple of my posts where I need to be posting because I am younger then most of you and didn’t grow up using forums and don’t really understand them. But nobody has corrected me or mentioned anything so I have just continued as I was.

So recently I was curious about a cold air intake for my vy Ecotec and I thought that I would make a makeshift one to see if the gains will be worth it. So I cut out a portion of the stock air Boxster the bottom facing towards the headlight and cut a small section of non structural steel behind...

Excuse my ignorance but I did look around for a bit for an answer but couldent get it. I have an obdII scanner but I can’t scan the car. I vaguely recall reading somewhere that the car isn’t obdII compatible and you can only use holdens tech 2 scanner, but I have also read that you can get the...

Vy sedan series 2 Ecotec

Spoke too soon, still doing it. Any ideas?

Don’t know how to close a thread but this b**** of a car decides that it wants to be Stop doing it and behave immediately after posting and is now working flawlessly and the issue of no accessory power was because I chose a shitty earth when wiring. I’m currently trying to fix dangerously low...

So this is the weirdest thing I have ever seen and just caused me to have to break into my own car. I have been having some issues with the central locking and key seeming a little strange sometimes taking a few presses to open and sometimes locking itself. I have now concluded that the car...

Hey guys, new here and also born after the ages of fourums so I have no clue what I’m doing so please if I post in the wrong place or break rules feel free to have a go. Anyway to the question at hand. I have an Ecotec that is seeming to be on its last legs, if I can’t get it sorted I will be...

Thanks for the reply mate! And yeah all I needed to know was that they are all the same m80. Mine is the 3 bolt which seems to be more common. In the wet i can drift around no problems by weight transfer either by feinting in or just going hard into a turn in first or seccond and stab the...

Not sure if right place to post but looking at an lsd center or mini spoil for my vy v6 series 2. Not looking for opinions or to start a war of opinions and questionable facts. My question is how many spline is the auto vy series 2 non lsd diff with the code “FL” Are all diff’s of the vy m80 28...

I can get the part number but I think I just realised I bought the v8 ones but mine is a v6 which would make the front lighter I would assume

Hey guys first post but I recently installed ssl all round on my vy berlina s2 and the rear ticks into the guards and the front tyres are still below the guards and I only have a single 10inch sub in the back. I usually hear people going to sssl in the rear even but I can’t understand why mine...

Hey mate new here, so not sure if this is the place to post. But I just removed the whole intake and fuel assembly and cleaned and polished the inside and reassembled. I have two silver 10mm flared nuts left over and when I start it straight away makes a very loud whirr and get hen shuts off...