What was the point of posting that? Save it for your own threads. It is a useless reply.
If you haven't seen the different types of balancers that are available, maybe you should look.
Not everyone has the skills and can do the same things, so what's custom to one person may be not be custom to another. Some people probably look at changing anything stock on the car makes it by definition, "customised".
Custom to me means there is something that's unique, one off, or a...
I got the said Nolathane/red ranger diff insert bush and the Pedders Axle tramp bushes, The tramp bushes stiffened up the sub frame which you can feel but it didn't do anything for my axle tramp...
I can't spin the wheels in a straight line without the whole car vibrating and banging, go...
I did not intend to infer that you can use the 2wire sensor in any 4 wire sensor application. The sensor in the pic is suited to my series 1 VX (08/00)
The 4 wire sensor has 4 wires but looks almost identical to the 2 wire sensor in the pic above, same box, brand etc otherwise I would have...
What code do you call this flash sequence:
2, 10, 1, 2, 10, 10, 1, 2 long-pause 10,10,1,2 long-pause 10,10,1,2 long pause, 10,10,1,2 ?
link to video
I gather the 1,2 is code 12, but what are the others?
I went into repco a couple of weeks ago and asked and they said 100 and something for one..
I looked on Ebay.. and bought 2x of the 2-wire ones for 117 delivered. The brand of them is Delphi. There is an improvement in fuel economy straight up, but it wasn't until I changed the coolant...
I just replaced my Coolant Temperature Sensor $80 from repco... Im not saying that's what is wrong but it made my vx idle better and has improved my fuel economy and pepped the car up off idle. It also removed a problem I had where the revs would not sit at 1000-1300rpm it would jump and clear...
It just about sticks to everything. Just make sure it is clean. I used that K&H grease and wax remover before applying the mat, which helps it to stick better.
After reading the first posts I was at a loss to understand how people could not find it or undo it..
I posted the pic to show what to look for, for that reason only.
But your right. It's the bottom of my ecotec.
Measure each injectors resistance too! (haines says 11.8 to 12.8Ohm) The problem is when the injector wears out, its resistance gets too high and the coil in the injector needs to be rewound OR injector replaced. Servicing does not lower injector resistance.
I use the MSD ones and my shortest lead is 47ohms and the longest about 180ohms.
As long as they are made for hi temp and have the same or better EMI shielding then it will be ok.
yeah sikaflex...silastic... I cut the mesh to shape, just a bit bigger so I'd have room to bend it over the edges by 2". I used about 2 tubes in the caulking gun on mine and it looks messy from the back, but has been on for 4+ years without needing another look, but, can be removed with a...
this might be helpful for VT/VX executive / lo-level BCM owners, but if the VS is similar then read on..
If you've hooked anything to the door pins you will find they work sweet until you close the door and whatever is connected to it gets 5-6volts from the BCM. It is a input for the BCM, you...
I look at the profile of the car and occupants and should they fit the police stereotype (clean haircuts, shaven, clothing, car specs, 2 police for active patrol, otherwise look like uptight fags, environment your in) then escalatively, it's more statistically probable that car is a justified...
then invest in something like Acronis True Image so that should "this" happen again it will take 15mins to reimage the drive. (not reinstall windows and programs.....)
David Guetta - Traccia 6
Jay Z - Death Of Autotune
Kid Cudi - Soundtrack to my Life
Rocket Science - One Robot
The Black Crowes - Kept My Soul
David Guetta ft Akon - Sexy Bitch
David Guetta ft Kid Cudi - Memories
IAMX - Nature Of Inviting
The Checks - Bagheera
Street Sweeper Social Club - Clap...
Don't quote me on that part, Im not sure if it has a limiter but I've hit whatever it has before and backed off immediately when it started to splutter, so I don't know.
Unless you drop below the downshift speed, If you leave it locked into 2nd it stays in 2nd.
Same with 3rd, it will hit the limit in 3rd as well.
Lock it in 1st and it will change into 2nd at the shift point... 5500rpm
Thats how the stock auto works.
I just went into Repco and asked about the CTS mounted below the thermostat, he said there was another part available and is for the guage..........
Where is this sensor?
I dropped into the radiator shop on the way home and the guy showed me where this sensor is on his VS then looked at...
I got the fog light sealed to the air box and even when I spray the guerney up the hose no water gets in to the air box..
If you had them sitting right behind the fog lights then of course they would be subject to more conditions.
If your model is exec like mine you can goto holden and acquire the "higher model" (Mid and Hi Level BCM models) door pins which are dual contact switches (2 pins) that make common ground.