Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. Raptorsc

    2004 VY S Manual Sedan!

    Pity you had such a bad run with the motor, really about the worst story I have heard. Best of luck for the future
  2. Raptorsc

    Pollushon's VSII Acclaim

    How is the ol girl performing lately?
  3. Raptorsc

    2004 VY S Manual Sedan!

    You should be able to have some fun with BA, BF and FG XR6 drivers lol
  4. Raptorsc

    2004 VY S Manual Sedan!

    By incredible luck I found a washer that was 31mm OD, drilled the center out to 19mm and posted
  5. Raptorsc

    2004 VY S Manual Sedan!

    Pipe ID is 31mm, so that's the object size and pop a 19mm hole through it - metal piece
  6. Raptorsc

    2004 VY S Manual Sedan!

    Now there is a thought!! The 19mm restrictor which fitted in end of BOV return hose. If I recall it was a welsh plug and I machined a hole (19mm) into it. Will check stocks and see if I have necessary materials
  7. Raptorsc

    2004 VY S Manual Sedan!

    Bit of a mission for sure but definitely there now. Enjoy the easiest way to get boost that exists, apart from buying a car already with a blower lol
  8. Raptorsc

    2004 VY S Manual Sedan!

    Mega thread - you waste no time
  9. Raptorsc

    250kW VF SV6 .......... now there are two

    The most modded VF V6 in Australia I am guessing
  10. Raptorsc

    Tune sv6 brisbane/ gold coast area

    Brisbane Tuning and Turbo at Wooloongabba would be your only stop
  11. Raptorsc

    VF SIDI engine development - supercharging

    Rough calcs, it means I have to be able to get the torque up from 380Nm to about 490Nm - seems doable, adding 110Nm is a goal
  12. Raptorsc

    VF SIDI engine development - supercharging

    Consider how this VF SIDI made 255rwkw with the torque figure shown on the Dyno chart and you may see how this can all happen
  13. Raptorsc

    VF SIDI engine development - supercharging

    Been adding that kind of number to Alloytecs for years, the SIDI is no worse an engine, likely a further improvement. The math indicates that the amount of 100 extra is on the very pessimistic side.
  14. Raptorsc

    VF SIDI engine development - supercharging

    Hoping to come forward with more info on the supercharger system development Looking to add another 100++Kw to the current rear wheel Kw number - :)
  15. Raptorsc

    250kW VF SV6 .......... now there are two

    The car idles smooth, no officer in Australia would or could pick the car as having cams fitted, a case of smooth running vs smooth running. The car is entirely drive-able and accessing the extra power in your daily drive is as simple as opening the throttle/depressing accelerator. Having...
  16. Raptorsc

    VF SIDI engine development - supercharging

    For the VF V6 owner - bit of new work going on http://forums.justcommodores.com.au/raptor-superchargers/245357-raptor-premium-sidi-files-ve-vf.html#post2752218 By the way, did anyone know that there is a VF SIDI with MACE cams and a few other goodies running 255rwkw @7740rpm? Check SVS...
  17. Raptorsc

    VF SIDI engine development - supercharging

    A link to the action http://forums.justcommodores.com.au/raptor-superchargers/245357-raptor-premium-sidi-files-ve-vf.html#post2752218
  18. Raptorsc

    SV6 1/4 mile run @ Willowbank

    Lfx Goes real well in my opinion.
  19. Raptorsc

    My Stanced Phantom Black SV6 - plenty of mods included

    Phantom Super nice car
  20. Raptorsc

    513rwkw V6

    That TERAFI is a well sorted bit of gear. Once the engine combo is better known a lot more of them will be seen in action
  21. Raptorsc

    My VR V6 remote mount turbo

    The BA injectors are quite useless unless you lift the rail pressure to 4 Bar, even then they arent much of a option for a boosted engine You need some sweet 42lb BOSCH injectors and build the game up from there, otherwise headaches of not enough injector will be be present from 240rwkw onwards
  22. Raptorsc

    Pollushon's VSII Acclaim

    Good work champ - make it more safe and it brings a big smile when it steers and pulls up like you want. You have had months of cold boosting weather now :)
  23. Raptorsc

    Pollushon's VSII Acclaim

    The power weather must have your beast lighting up pretty easy now Winter is on its way
  24. Raptorsc

    [NSW] VY Parts/Wheels For Sale

    Hi Do you still have the steering wheel for sale? - Apologies - just saw that it was gone
  25. Raptorsc

    VR Senator with LSx454

    Now that's what you would say is done PROPERLY
  26. Raptorsc

    Pollushon's VSII Acclaim

    Love the look, I love the iron fist in velvet glove approach for daily work, never a drama with da coppaz You got a good exhaust on there now?
  27. Raptorsc

    Alloytec and SIDI Cam Development

    Steve, the parts support for these engines from the MACE side is what tops the power charts off very nicely
  28. Raptorsc

    Alloytec and SIDI Cam Development

    295rwkw VZ exec This Dyno has Mace cams in the background Gave 20rwkw more than car with same SC system without cams Mace Cams in Alloyec with SC = very good. Just a fraction less than 400rwhp
  29. Raptorsc

    Vr v6 supercharged problems

    Yes, the belt has a reliability speed limit, all machinery has limits as you would well know. That limit has risen a bit lately, not sure of new limit with RaceChange system, we have edged it up a lot on our test vehicle and still running well, needs more run time tho to be certain
  30. Raptorsc

    Vr v6 supercharged problems

    71.5mm Inducer/intake diameter If his motor does 6000rpm the impeller speed with 61mm pulley is ~ 51 500rpm
  31. Raptorsc

    Vr v6 supercharged problems

    The 61mm pulley as fitted on your charger has seen up to 380rwhp on built Ecotec. The chargers are all the same - except for when optioned with high flow impeller Inflow air feed to supercharger - must have a section of pipe - cannot be filter direct onto charger, I have proven long ago this...
  32. Raptorsc

    Vy Spac series 2

    Ahem Powerdyne Power :)
  33. Raptorsc

    Pollushon's VSII Acclaim

    Going well lad? The cooler weather be drifting away from now I suppose
  34. Raptorsc

    Pollushon's VSII Acclaim

    With the cold weather they would be getting he must be going faster than he can believe lol - boost heaven
  35. Raptorsc

    Pollushon's VSII Acclaim

    Going well hey?
  36. Raptorsc

    Pollushon's VSII Acclaim

    Ahh Take care lol
  37. Raptorsc

    Pollushon's VSII Acclaim

    A 318, must have a good turbo!!!
  38. Raptorsc

    Pollushon's VSII Acclaim

    Higher psi has this effect lol
  39. Raptorsc

    Decicrates VS L67 T56 'S' Pack

    Deci What's the price of these injectors? Is Moran the manufacturer?
Top