Search results

If the TPS has failed the engine light will come on

Sounds like it suching air into the system. Check the return hose clamp on the pump.

Peel back the door seal and grease the seal channel on the doors

Cheak the iac motor on the throttle boby is clean and moves freely.

Good luck getting warranty. Maybe if a holden dealer fitted it .Thay would have a 10,000 or 1 years warranty on parts and labor.

Try using a nail as a fuse

Holden fitted adjustable camber starting on the VX2 model You can fit a camber kit your self on a VT all you need is the kit , Panadol, a masive hammer , box of matches and a drum of petrol. Good Luck.....

Commom problem , the power steering pump pulley needs o be pushed further onto the shaft .

There has been a recall on the sender cards in the fuel tank and part of the modification is to bend the flood lever. If you complain enough to the holden call centre you will get it done under waranty.

Try spraying silicon spray in the window channel.

Make shore the box is filled with Dex 3 transmission oil. Workshops mark the mistake by filling with VMX 80w .

You can get a brand new pump from repco for $220.00 or a exchange for around $130.00. The exchange pumps can sometimes be noisy ........ Make shore you replace the suction hose and clamps .......GM only $15.00

Sound like the leads GM leads are around $69.00

Checked the fuel pressure.......

Exchange transmission is about $2600 fitted Start saving........... Every flog = $5.00

Try a V8 type

From a rental car.

Find a impack socket that fits on with a hammer and take the wheels off. You can buy a set of lock nuts for around $30.00

There was a service techline on the steering collum adjuster lever hitting on the plastis collum. The fix was to bend the lever to prevent touching.

Sound like the regulator . New electric regutator is around $140.00 and takes about 1 hour to fit. When fitting a new regulator avoid using pop rivets, instead tap the 4 holes in the reg with a 6 mm tap and secure the reg to the door frame with 4x 6mm bolts and nuts and loctite the dudes in.

Thay are called door moulds . They only come in grey and must be painted to suit the colour code if nessasary. Remove the old mould and fit the new type on with double sided tape on the top and sikaflex on the bottom. The reason thay break is cos the tight ass in holden dont fit enought...

Check the condition of the fuel cap first , second make shore all the rubber gromets are still fitted under the car around the floor pan

There was a recall on the fuel pump sender units or MRA . VX-VY To remove the pump the tank must be removed . It take around 2 hour to remove and replace the MRA

It takes around 1 hour to remove and replace.

Sounds like the lock and actuator is stuffed. Very common problem with Vx-Vy New actuator is around $170.00

Cheak the centre joint on the tail shaft

Cheak the pop riviets that hold the regutator . Most of the time the riviets have rattled out causing the reg to vibrate.