Search results

Well I'm back, I have spoken to the technician and they didn't watch for drain back when doing the pressure test whilst looking for the hard starting problem, makes me wonder a bit hey....anyway so I picked up a el cheapo one from supercheap and checked it myself after pressurizing the system...

Hi, question on that would be it's passed a pressure test, if it was faulty would it still pass? Just have to add sometimes it will start first go hot or cold.

Hi, I've got this exact problem, is the OP still around, I'm guessing he might of fixed it.

I have a after market trans cooler set up on my VX SS that I did myself, similar line fittings as the V6 as they use the same trans (4L60e) mine is set up like this ... From trans >radiator inlet (bottom fitting of radiator) > radiator outlet (top fitting) then the rubber line is cut in the...

Better late than never, they mount to the top headlight bolt. (The one that holds the headlight to the car).

Just update guys don't bother with eBay HID kits they are trash, I'm currently running a quality set of LEDs.

I have a feeling even if you gave the car away and bought a VX here on arrival, you still would be better off in the hip pocket, than if you shipped your one with you.

Fairly sure VT2-VY2 is all the same 74mm butterfly thathas the crosssticth pattern on the butterfly they all have a small 1/8" hole standard, they all look like this, if yours does not????

Is the TB aftermarket?

At all?? or you mean no larger.

Oh when you say Bypassed is it catchcan>plumbed somewhere else on the T/B/inlet, vented to the atmos, or plumbed with a normal hose bridge/ new piece to the same port on the intake manifold, or worse lastly sealed crankcase vents? If the answer is 1 or 2 it won`t. if its 3 it could be blocked...

Is the hole in butterfly drilled out to a larger diameter than stock? stock is 3.5 mm check by placing a drill bit by hand into the hole if a 3.5mm fits snug......etc... Is it Stock, tuned, cam?

On the bottom of the Cable operated TB`s( VT2-VY2 LS) there is a small Allen key screw located vertically on the bottom of the tension spring for the cable. , this opens or closes the butterfly depending on which way you turn it, its a idle speed adjuster.

Don`t #### around just put the 4.11`s in it will be more snappy down low, perfect for a street car.

Cheers bloke.

Hi, again lion enthusiasts, I have just done this mode on a VX S2 SS and its a neat install. the factory wires may differ in the VT, especially the series 1 as Holden swap wire colours as they do ey!! later I will get a set of OPT 7 branded H1 CREE LED`s ($150 a set). But ATM I used Chinese...

One of the better VX tail lights I`ve seen compared to the other over shinny silver types on the two small (reverse/indi) lenses...., car is 4 sale in Maddington. would not mind knowing what brand exactly these are.... all the **** on ebay dont have the same specs... have a good look...

It comes pre loaded with thread seal, nothing else to do, x2 on the 27mm deep (long) socket, thats exactly what you need.

DELPHI, VDO, AC DELCO, make OEM genuine items. so yes.

Gone for 10 years!!!! His Mrs must be one hard woman haha.. operation FREE MURVO!

Good job Guy`s you scared him off with your bands and drums, I was trying to keep it dead simple, straight out just check the quality of the fluid, number 1 killer of trans is HEAT number 2 is abuse/poor servicing.

For absolute simplicity get under the car and unbolt the cat and start the car straight out the extractors bet you it revs better, then you know 100% the cat is ####ed, not to mention you can just visually inspect the cat to see if its blocked.

The cats type wont be affected by the presence of the EGR, the VY may fit, if the bends joins etc are the same get under yours and have a look.

VDO may also be a good option.

Check Fluid level trans has to be warm on flat ground and engine running and in P, Fluid colour, pink/red=clean, brown/black= dirty/burnt and it will smell burnt too, if this is the case I`d recommend a MAJOR trans fluid flush inc torque converter. When was the last minor trans service?

Dirty Fuel, failing pump.

Yep sounds familiar tomy sisters VE, someone has snapped the adjuster mount (its plastic) by most likely still applying torque/force after the lense had reached its top or bottom adjustment point.

true yes 15"s wont fit on 320/300x32 only the 296mmx28mm. hmmmmm.

Fixed just copy paste and close the gap between . and com cheers. The photos are detailed as heck unfortunately it says the thermos are around 90mm thick min. though depending where the pulleys/belts is located it may have clearance in that area of 75mm possibly???

http://www.aussiev8. com.au/holden-v8s/37776-ford-el-au-thermo-fans-into-hq-hz-holden-v8.html there ya go. ^SPACE added

Great read it really pays to do most of that list personally CBF taking out the seat but most of it I use when down the plex. I do have more to add. Autos are generally accepted to be the go for drag racing that been said manuals have the advantage of both more rwhp from less parasitic loss...

Traction off, why? because when it kicks in it kills the power considerably by shutting off the injectors or retarding the timing (like knock sensors).

to match the cam with exhaust. 1 3/4 primary's are perfect, unfortunately 4-1`s are the only decent type thats available off the shelf, 1" 5/8 (stock-intake/tune) is too small and 1" 7/8 is too big (forced induction, big HP N/A strockers etc...) I want to make a killer set of try ys that will...

Happy to stand corrected but......... The Tailshaft is different as the VT S1 (97-98) V6 and 5.0 V8 used the M78 diff vs the LS1 using the larger M80 diff and the flanges are different. Even the VX s1 (00-01) LS1 got the LS6 style intake, LS6 is a LS1 just speced up a bit.

ISIS must stand for I S CARED I S CARED lols.............:banstick: https://au.news.yahoo.com/thewest/world/a/31456652/is-helmet-cam-footage-reveals-terrorist-fighters-as-frightened-disorganised-rabble/

Legit, it's the battery when they get low or faulty the system inc ABS sensors go ape and the light comes on.

Looking to get a code read, any members with alibia/aliexpress clone tech 2 ? staying SOR cheers in advance.

Hi don't normally ask for such, though in the city ATM and the Engine light has come on and just need a code read. Staying SOR.

What is with PROFESSIONAL`s these days his bussiness is transmissions ffs, might as well shut the doors aye all the trans are electronic these days aye, man this **** is funny.

Nope wrong, the one in the ENGINE bay of all VT-VY V8`s is the PCM the **** in the passengers footwell is the PIM more **** that don`t get touched champ. Some engineer getting big dollars thought putting the putter right next to the exhaust manifold and placing a piece of thin sheet of wood...