Search results

Bearded offroad competition truck/4wd/ not a soccer mum 4wd | Cars, Vans & Utes | Gumtree Australia Brisbane South East - Carina | 1049300464

yea a pic would be great please

Looking to make sure I don't get any milkshakes now. PWR seem to be the only place selling something to stop that. anyone heard of any others that they would recommend?

The hardest bit was the plug where it leaves the engine from :P tight space and its a size 24 spanner and a 24 deep socket both in there at the same time. Getting the old filter element out was annoying too.

I got this kit from Earls Brisbane, but they sell the same kits on eBay. Not happy with how the lines are sitting. Both are a few CM's too long I think. It was also dark so was a bad photo. Will try and tidy it up and take a photo in better light as well.

So I got something else to fit as well in the meantime till I have enough to do the proper install and tune.

That stock pipe between the new air box and power steering didn't want to go back on and took a bit of effort. I pulled out the pipe kit which I got and was thinking about fitting everything except the cooler. But just made it fit cause was running out of light and had work the next day.

First weekend without something on in ages so decided to get the Plazmaman battery relocation in. Managed to get it installed without too much drama.

So I had some Plasti Dip laying around and decided to see how the car would look with all the silver bits at the front black. I also did the rear grill black.

So I might have spent all my install and tuning money and brought another motorbike instead....

I like my darkest legal tinting. When I was driving from Melbourne to Brisbane the other day I got a little bored at one stage and was like wonder how much cooler the tinted drivers window was compared to the untainted front windscreen. Was a noticeable difference between the two with how much...

Back in Aust and heading down to Melbourne to pick up my car tomorrow morning :). I've missed it. My brother had the tail shaft remade and strengthened while I was gone so now with the diff and tail shaft both redone time to start dusting off the boxes under the house with the inter cooler kit...

I had a bad experience with his dads business and one of my good mates got screwed over by Blue Power as well in the same sort of way as what I did. So I'm gonna stay away from them.

Haven't used it properly for a couple of years but this is my 2000 Giant ATX. Just about everything on it has been replaced cause its snapped or been broken in some way. Only the frame is the original thing.

i just found someone who was wrecking their VT and brought their roof lining off them for $20 pulled my sagging one out put in the new one. All it cost me was the petrol to go pick it up and $20 for the second hand one still in great condition.

So works sent me away for a bit and my brother picked up my car from my place today to drive it back to his place in Melb and look after it for a few months while im gone. Too bad Pit Lane is too far away away from his place or else I would get him to go there and get it tuned and parts put on...

Well if thats the case then I hope someone else buys a G6E Turbo and starts a thread... cause can't have the 'prettiest' G6E on the forums faster then mine as well :D

It's all good i've had to put a pause on mine as well... work decided to send me to Malaysia till Nov :P So my cars just gonna sit in the work car park till then. No peer pressure from me.... for now... lol

So a box of goodies from Plazmaman arrived today. Surge tank with single 044, Turbo side intake, Battery relocation kit and some new springs. So now just got to get a new strengthened tail shaft then get the rest installed and tuned. And gotta get rid of the cheap tyres on the back and get...

So what your saying is to get the shop to fit it? lol

Yea was a 4"... See how it goes and if I don't like it can always change it further on down the track. youtubed xr6 turbos with 4"xforce and didn't sound too much louder. What would Froggz want with a stock exhaust... :P

So been heaps busy with work and haven't had much time to do anything. Only new thing that has arrived is pictured below... Also I got a nice awful looking blanket for my backseat as well, but the rear headrests are getting in the way of how it sits... :P

Maybe you have put in too many extra lights in your interior lol

Yea mate its the D34. Picked mine up from Battery World for about $340 i think it was. Was so annoyed when i went away with work for the week came back and mine was dead...

So been looking at tailshafts... snapped the one in my last car while staging at the drags at Heathcote and don't wanna do that again :P Choices are a one piece tailshaft or a two piece... seems one piece can take a lot more power but you get way less noise and vibrations with a two piece...

Thats a great idea!!! Wonder what design it should be...

Because the hat is the drivers most the time and they don't wanna lean over to the other side of the car to get it... much easier to just open the rear drivers door to get it :P

So today I splashed out and spent 3 whole dollars on some stuff for the rear parcel shelf. Haven't decided if I will get Venetians yet but that will be a bit further down the track. Also the new SuperPro diff bushes arrived today.

lol It's all good there isn't a battle... I have my goals I want and AirStrike is happy with what he has. I'll be quite content with the same power :D

The stage 3 kit arrived today :D

Naa told him I didn't want it.

Nope. Lucky the stock turbo is a GT35R so there is no rear housing change required when changing to a GTX3582R

lol yea I should have asked first if anyone knew a good price on them

Yea that would be terrible to know lol... Who's CMS?

A mate had it on his 180SX for about 2000kms and decided he wanted a bigger turbo. So its used with 2000kms on it but I got it for $1500. At that price was hard to pass up.

That is all

Nice. I went to have my eyes done over last Christmas holidays but stuff with work came up so I couldn't. Looking to get mine done over the Christmas holidays at the end of this year now.

That doesn't sound too bad. Any chance of getting the part numbers for the ones you used?

Haven't noticed any wind noise so far but also haven't done above about 70 since they were put on. Cost $45 for the two front ones. It's time for the next big choice... Venetian blinds or a hat for the back window/parcel shelf...

How does it feel with all SuperPro bushes in?