Search results

Yeah man my rig is going ok have a whole heap of things here ready to go in it cam heads otr etc. hopefully all that will be done in the next few months. Glad the kits going so well for you :)

How is my old kit going? Hope all is going well!

Hey mate I'm thinking of putting a sunroof in my Vy Ss ute. Would you recommend the same model as you have used? Also where did you get it from? I can find plenty of places who install them but no one to just supply

Just buy some mothers aluminum polish pullusion. And for the tiny bit of added heat it's well worth it. I really don't think it would make much difference tho

Sounds like it's going well mate! Yeah mine used to leak bad at where that pipe which goes through the tensioner pulley assembly goes into the lim. It's an odd size o ring. Took me a few goes to find the right one to stop it leaking.

How's it going down there Scott?

Yeah man it's as simple as rockers off and pushrods out. There's a plastic piece which sits on top of the lifters which you just take off and then the lifters just slide out. They are under the lim.

Do you have any lifter noise? Maybe replace them while you are there

Yeah those gaskets are the go!

Lol how much you want to spend bro? You seen my ute?

Trans cooler* damn phone auto correct

Great idea! That's the transcoded I had too. I just ran it though the cooler only and didn't bother with the radiator. Can't remember what but something I heard or read at the time told me that was better?

$90 off eBay from carsrus

I just threw another standard one in mine and it was fine

It will be heads, cam, timing chain, pushrods, lifters, 25% under drive, Ziggy Otr. While the engines out I'll replace my sump gasket and rear main. Thinking of upgrading my pacemaker tri-y's to 4 into 1's but will be staying with 2.5 in cats and catback. Won't be all happening until after I...

Starting to collect some parts...

Looking good Harvey!

Are you still on stockies bro? Need to get some bigger tyres on it for sure!!

Haha glad you are having fun with it! You'll get used to this new found power pretty quickly! Sounds like its going well!

Oh well could be worse. $40 and an hours work and she'll be sweet!

Get the reg in?

Took a few pics last night... This one turned out well. Thanks to lag and the 4 fellas in the tray ;)

Go the ultras man it's not that low. Sits good. Yeah man doing all the work myself and with the help of a few friends if I have any questions. Been told its alot easier to take the engine out cus I'm changing the timing chain and oil pump while I'm there.

Mine ticks too. Will see if it still ticks after new lifters go in with the cam

Oh and the 4.11's are great. Car cruises so much nicer now. Takes off smoother. Everything. And to be honest is still quiet on the highway. Sits at 1750ish rpm at 100kph.

On the ute the super lows sat a little high in the rear for my liking so I put the ultras in. The rear sits at exactly 100mmm but the flanges for my cars are unfortunately at about 80mm. Doesn't scrape much so for now I don't really care. Could get it up about 10mm just grinding the flange up a...

Haha nah bro already decided on cam and heads for now. 232 234 cam. That should liven it up a bit!

Model: 03 Vy Ss ute Colour: Red Bodykit: VY Ss Engine Type: LS1 5.7L Engine Mods: Stock Power: Unknown Exhaust: pacemaker extractors, mangflow high flow cats, xforce cat back with twin hotdogs at rear Gearbox: T56 with rip shifter Diff: 4.11 lsd Brakes: Stock Suspension: Super low...

What's your current exhaust setup?

How's this thing coming? All up and running properly yet?

Thanks munz

Looking at buying a 232/234 cam from camshaft warehouse in America on eBay. Is the vy ls1 cam a 3 bolt of 1 bolt camshaft? Thanks

Yeah getting the coil pack to the back it a bit of a pain In the arse! Slowly coming together bro

One solid hit and they should be out.

Looks good bro!! I actually had to cut a little out of my front bar to fit the cooler. Just make sure you aren't putting too much strain if you are stretching the bar around the cooler. Don't hesitate to call me with any issues!

One more payment! Going to get some quotes and try get it sent Friday for you bro.

Hey mate unfortunately the engine sold on eBay last night for alot less than I wanted for it. I couldn't stop it as there were already bids on it. Sorry bud

yeah mate i have no issue chucking it on a pallet for you if you pay for the pallet and shipping

ITEM: I'm selling a v6 commodore supercharged l67 motor. LOCATION: Brisbane qld CONDITION: Used PRICE: 1000 Ono DELIVERY/PICK UP INFORMATION: pickup or I can deliver for extra between Sunshine Coast and Gold Coast. PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer or Other...

Bump someone must want these!