Search results

I guess i'll just sacrifice a key head then as it seems the easiest option. Really? i have a key barrel in the back of the glovebox where i can stick my key in and turn to the off position, when i do that, the factory alarm switches off. Odd. As far as the ignition relay times, i've found a...

Hi everyone. I'm currently in the middle of making my own remote ignition system with an arduino (programmable microcontrollor) that can remotely start my vs caprice with a text message. I've gotton as far as being able to flick over the relays and such (hard part) and am still working on the...

Down here in Frankston, we've got a VE SS Wagon, antenna's are hidden throughout the roof lineing, the lights are modded inside the reverse lights, and the grill, lowered to minimum legal height and sporting a 'my family' sticker! Theres also an SS ute, with the bar setup, on 19's, Around 2...

Hi guys, been a while since i've been on here, just bought a new VS Caprice. The bloke i bought it off said it had a power steering leak from the rack. He also mentioned that one of his goober mates had put hair conditioner in the pump in an attempt to stop the squealing noise they can...

Bump bump bump!

Sorry mods! please move, honest mistake!

Hi guys, been a while since i've been on here, just bought a new VS Caprice. The bloke i bought it off said it had a power steering leak from the rack. He also mentioned that one of his goober mates had put hair conditioner in the pump in an attempt to stop the squealing noise they can...

Picked up my new VS Caprice today, as i'm 12 days from getting my license back. Body is in perfect condition not one mark, Bog stock 5ltr, pretty much grandpa spec :) 230,XXX K's. Has a few small problems, Auto is slipping a tiny bit, and the rack leaks, but over all i'm happy with it :)...

I'm guessing a fault in the barrel? if so, you'd need to replace the barrel, key & BCM

Some dude on facebook, who lives in Langwarrin VIC is claiming this to be his car, has pictures up of it.. Welcome to Facebook - Log In, Sign Up or Learn More

Nie new headers!

Ferntree gully had nothing on the frankston gig, massave mosh. they had a few beers with the crowd before the gig. Awesome!

Ahh, you learn these formulas in the pre apprenticeship, before you even start..

Anyone see Karnivool play this weekend? MENTAL!

Nah that's cool man. BUMP

Minispooled mate, locked diff.

Nah i doubt i'll still have it, i need it gone asap, as i owe the parents rent money :| and wouldn't mind a slab for chrisy ;)

Dropped to $400!

Will deliver for $450 cash today, metro melb & surrounding suburbs!

Did anyone else notice the Dunn & Bradstreet (debt collectors) logo on the bottom of the products page? Odd :|

That's my 'pride and joy' :unsure: Shame when some asian bloke runs up your ass and neither of you have insurance and being on first year wages just doesn't cut it for another car.

Ahh no idea mate, You'd have to find that out yourself, i'm happy to help organise, but i wouldn't have a clue of the price, i'm guessing a fair bit, but i'd do it for ya..

Will take $450 cash this weekend if anyones interested, i need booze money :|

$400, great start.

ITEM: Reconditioned IRS diff to suit All IRS commodores up until VX, 3.89 gear ratio, minispooled. oil included. Bought this diff off of ebay, from the bloke that used to own sunshine differentials, A VERY VERY good diff builder, paid $680 delivered, i put it into my rolling shell VQ but alas...

One of me mates has "FRYSUM" Some good plates i've seen are RAPID6 - XR6 T NO-REG - vt i think.. EX-COP - cant remember COPTSR - VL loads more, just cant remember.

go 3.9's not to high, but high enough for some fun with a spool ;) Also, as said above, don't bother changing diff gears without putting in and LSD or spool.. since this is your daily, i wouldn't bother with 4.11's, just to un practical..

Hmm, lots of things to check, engine coming out, just bought all new seals, welsh plugs and stuff. bathurst weekend job :) When the wethers better, i will be checking the ventilator. Any other things i should do to prevent **** from happening in the future when i pull the motor out? keeping in...

Yea i was thinking rocker cover gaskets too, but it's not. I'll be pulling the motor this weekend, while i'm at it, i'm gonna do all welsh plugs, gaskets and seals. Just to be safe :)

Pfft, these laws have done almost nothing. Majority of P platers still drive 8's or boosted cars. and i'm not sure about the rumour going around about taking the law away, but there has been more accidents involving p platers driving high powered vehicles then before the law was implemented.

Figures :)

I was planning on doing it myself. I just spoke to a 3rd year mechanic, and he reckons it's somthing else, he didn't look at it, but he said with that ammount of oil coming out, it might be something else. It's not the rocker covers, i know that fr sure, but i can't see where its coming from...

Oh good.. Rear main seals cost bugger all yes?

I thought it'd be that :( With reguards to pulling engine out, and disconnecting A/C anything that i can do to not lose the gas?

for the past few weeks, my VQ has been dripping a tiny bit of oil on my driveway, didn't bother me too much (stupid) and for two days now, it's constantly dripping when turned on, it's coated everything under the car in oil and it's coming out almost in a stream. a bit was coming out of the...

And i need ideas on color :| Wouldn't mind a metalic color, it's currently silver. just exterior, and maybe the boot and door inlets if i can be bothered.

Sounds good, any work from 3:30 onwards and weekends?

You'l love it when it chirps second too ;)

Well to be honest, i do think first year wages are a little bit unfair compaired to how much the company earns from us. For instance, a customer is charged $110 for an hour of my labour wich to me was worth $7.20 now tell me thats unfair :| And this is an hour of labour that i do souly on my...

Could someone tell me how a burnout on factory roads with no one around has the possibility to hurt someone?