Search results

Hey mate.. I saw a post you wrote way back about 4 years ago about pullling apart the VX commodore power light switch.. Have you got any clue which way the LED's go in? Cheers.

All my LED's already came with a resistor on them. I just want to know the voltage of the posts in the master switch as seen in post 1. I tried running a multimeter over the posts but I can't get an answer. I dont know if they are all required to be wired in series correctly for the voltage to...

Not sure what you mean my 'use the main plug'.. If anybody has a legitimate knowledge of wiring in LED's, please post up a reply. Thanks.

I did mate. I even stuck a 9 volt battery on each light to test which way it came on. From what I tested the light came on with the + pole on the right side (in this image) and the negative - terminal on the left side. I snipped them out and put LED's back in the same way but none of them lit...

What he said above.. Check engine light could relate to anything but if things still work and the car doesn't hear up I would say one of the sensors may be playing up.

Hi all. I took out my power window switch to convert to LED. Snipped out the green leds from factory. Now i'm not sure on the polarity of the posts to soldier in the new LEDs. I have 2 questions: 1. What is the polarity of the posts? Can someone use my image and draw some on for me...

I just want to make sure this is correct. Otherwise I'll just take all the LED's back out and run a multi-meter over all of em. Also I see that people say you don't need to put a resistor on them due to the fact they are already LED but will it make any difference? Should still work with one on...

One side of the light on the circuit board shows an asterix. I think its negative. If someone can just post an image from above indicating the polarity I should be able to figure it out.

Old thread but can someone tell me the + terminal on every one of the lights exists on the right side correct? The pole with the resistor is on the + side? Asking cause I just soldiered in 4 LED's all the same way but not getting any light up. I put a battery on each and they light up the...

https://www.facebook.com/pages/Vt-Ve-Custom-LED-Lighting/152421464861106 look this guy up. he's on FB. You send the parts off and he sends them back done.

I have a 224/224 114 comp cam. mild cam by any regards still gets me some extra power especially on the upper ref ranges. Its ok to drive with auto. done have a stall but i think going bigger on a daily would be a pain in the arse to drive..

Dude I got the same isssue.. like something in the front is loose and i get steering column vibrations.. nobody can tell me what the problem is.. it's low but never used to have these kinds of road vibration and shuddering at speed. new tyres a few weeks ago ballanced. tried different wheels...

G'day people. I've had a look in the manual and fuse box and I can't seem to locate where the fuse is for the central locking which controls the reciever for the doors opening via the remote. Can anyone tell me where I could locate this. Cheers.

It's easy to do.. If it's front, jack up one side at a time and spin the wheel.. you will hear if it's rubbing on the pads.. Changing them is easy. Undo the caliper with a socket wrench (2 big bolts from the back) swing the caliper over and rest it on top or tie it down.. then you might need a...

Cheers. I don't have that many pics.

Thanks to user 'pezouni' for assiting with the fix. If anyone having issues in Melbourne with VZ indicator sticking, Contact him.

If anyone is in Melbourne and having issues with BCM with the indicator light sticking on a VZ, Conact user 'pezouni' who is a gun at fixing these issues. Thankd for taking a look at my car and fixing the issue for me in less than an hour.

Sorry to drag up old thread.. Does anyone in Melbourne here have a spare Zettle or HFKM relay they are willing to sell me. I can pickup on the weekend? Please PM me if you do. I'll pay ya $40 for one..

Also having the same issues with mrs VZ.. If anyone has a fix for me or can come out to Wantrina, VIC and fix it for less than $300, Please pm me.. Cheers.

Has anyone had any issues on VZ Commodore with HID install with ABS warning light comming on when you switch the lights on? I don't get it on my VX but the VZ does weird things when you switch them on. Anyone got any ideas?

My wifes VZ has this issue.. Anyone know what the speciffics are for fixing this or what costs are involved? You sometimes lock the car and the right indicator stays on.. you have to re-lock it a few times to fix this.. It's rather annoying..

Thanks again for the instructions Bud, Saved me from reverse polarity!

Yeah I call BS to the power figure but all the same it's a nice looking car.. Interior looks good.

Wait on.. Back up... You want to put a toilet in your car? WTF? You already drive a shitbox.. what else do you want? hahah..

Little video I made of the wagon.. Just messing around with the video editing software.. hehe http://youtube.com/watch?v=dT1kbAUHB0E

Given it wasn't the best pic, If your going to re-submit my photos on other forums, Please let me know.. They aren't free for everyone to use.. Cheers.

Interesting to see a Storm Grey Clubby.. Nice colour.. I love my Storm Wagon.. Rock on! Time to ditch the aqirbox and get an OTR on that thing.. Mafless tune it and you'll be loving it more..

correct.

I installed a PAC SWI-X in my VX.. I forget the wiring but the MODE button requires a resister to be soldiered on.. Brown wire is for the wheel controls I believe..

A few newish pics: Installed a cam - Comp 224/224 114LSA and new valve springs. .. Out with the old.. .. In with the new.. New sounds.. http://www.youtube.com/watch?v=ZARe4Zt7VX4

When my VX got a cam change the other day, it burnt off a bit of oil for a little while.. then it was fine..

Thanks! Your blue car looks nice too..

Just a few new pics to bump it up.. Had new drive shaft donuts fitted, I'm in the process of -relocating my amps under the seats so I'll have them torn out this week and mounted.. At the same time I'm wiring up headrest screens which will go in soon..

My Rubber donuts have cracked on my VX Series 2 and I'm looking for some replacements.. If you can help me out drop me a pm or EMAIL ME Cheers!

Mate you got a VX wrecking? Are the Drive shaft donuts all similar or do they differ? if not how much for you to undo the drive shaft donuts and send em to me.

I got the SMS the othe day.. must be going around..

g'day mate can you take a pic of the interior - the seats.. thanks

A small boy swallowed some coins and was taken to a hospital; when his grandmother telephoned to ask how he was, a nurse said ‘No change yet’.

Wondering if anybody has any idea where I can buy some cloth trim like the VX Berlina has. The trim looks the same as the seat pattern shown below. Reason I ask is that I need to re-trim headrests and I need to get some of the same material.. Any ideas?

awesome find!