Search results

G'day sorry it's been so long in replying to your message although a I thought I had, anyway the short version is this the X8 and Adventra 5.7 are only two models with this traction control unit due to the solid rear axle set up and no traction control according to Holden,the rest I'm unsure of...

lol yep those are the ones

As per instructions found on several sites, but essentially one side to brake light feed and the other to the unit earth lead, not sure if there is + or - side on the load resistor, as a side issue I tried to reset the service reminder today to find that the mode button is non responsive so it...

Thanks for the input,will have to try a new switch as the red flashing light isn't operating either,will swap it out and report back, I remember hearing a few yrs back that some of the early ecu mods caused some issues thought this may be the case, will also have to track down some schematics...

Have several issues but I now believe they are all linked to the non functioning mode button, 5.7 V2 Auto Monaro been chipped but not sure what level, has 276rwkw/325rwhp

Have rear tail lights with led units in place of OEM and the cruise control doesn't work, placed two 50w x 6 ohm load resistors on the rear wiring and still don't have a working cruise control all fuses are ok

yeah that's what I thought but buggered if I could find anything but complete clusters, cheers will have to change my wording :beer chug: got it to many words lol

Gday was on here a few months back looking for some answers on VT instrument cluster issues and spotted a few things about changing the facia colour, now I cant seem to find it anywhere so any one know where u can purchase a different coloured facia plate for the VX .:driving:

If anyone reads this I have found solutions for the engine warning and the abs issues so 1 engine warning was a tuning issue and conflict between the two ECMs for gas and petrol and a mech with the right knowledge 2 abs was the module crewman x8/Aventra V8 owners beware that these abs modules...

Thanks for the input the just commodore family is really helpful as always Cheers

anyone know if there is a post for taking off a commodore bumper Cheers

Gday All The Crewman has developed multiple warning codes Check engine /Abs warning and a stereo head unit that seems to be possessed. Had the scans run replaced O2 sensors as was told then back it came. Abs warning and no traction control which is strange in it's self because the X8 doesn't...

Check out Amazon Innova scan tool with abs /srs for a couple of hundred suits chevy so should be ok for the Generals aussie cousin

Gday nice conv. how did u go with the new speedo does it have to be reset or need a factory code ??

Gday Jst about to fit some new pads to the crewy can I just push the front pistons back like with the older style or will the ABS chuck a fit

Gday each terminal in the connector will have a small tag on the terminal its self to lock it in u need to push the wire forward slightly and with a suitable tool depress the tag so u can pull the wire and connector thru pretty much all terminals locate this way cheers

Gday There is one way I have discovered in a thread on this forum with a diagram to show u the way but quickly put pull the b/w wire from the trac connector and no trac make sure u disconnect the batt first and consider this if u wipe out with no trac connected u may blow ur insurance which is...

Thanks for thr response dont suppose u know if the light is in series ? that could be a part of the no traction control issue ?

Gday all VX traction control where is the fuse ? read the card on the flip down panel couldnt see any mention of it as well as under the bonnet.Trac Off light is on but there is no illumination on the button on the console should the button light up like the power shift button ? Havent pulled...

Gday Thanks for this as I have jst purchased an VX Monaro and was wondering why the traction control wasnt working maybe this is the answer do u know if this mod will affect the cruise contol local dealer has told me that the two controls work in unison and I read on a forum that removing the...