Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. AmmoJammo

    What amp do I need.

    Both setups ran one of the old, silver, ReSponse 1500watt at 0.5ohm
  2. AmmoJammo

    What amp do I need.

    Magic? must be magic... lol
  3. AmmoJammo

    What amp do I need.

    lolwut? so, it was wired at 0.6 ohm, and the output power was measured by magic? or else you'd know what the impedance rise was... lol
  4. AmmoJammo

    What amp do I need.

    no, why do you think ported boxes have less impedance rise? why do you think these subs will instantly die in a ported box if they start to smell? here's one I prepared earlier.. and here's another... Although, right now, I'm more amused that you think you've measure more than 2000watts...
  5. AmmoJammo

    What amp do I need.

    You won't get 2000watts from that amp at any impedance... lol
  6. AmmoJammo

    What amp do I need.

    I said not to run the subs at 0.5ohm in the sealed box ;)
  7. AmmoJammo

    What amp do I need.

    when it stops being a clean signal, I already said that :/
  8. AmmoJammo

    What amp do I need.

    because everyone wants it louder, and will turn it up to the point where the amp IS clipping.
  9. AmmoJammo

    What amp do I need.

    It should be, those subs will happily take 800 - 1000watts of clean power all day.
  10. AmmoJammo

    What amp do I need.

    because the amp won't break ;)
  11. AmmoJammo

    New setup advice before i buy

    I'm not even sure what side of the argument you're trying to argue? but the video does show how deadener does what its meant to do... deaden resonances... its not an acoustic barrier.
  12. AmmoJammo

    New setup advice before i buy

    :rofl2: lol, you mean a manufacturer giving misleading information?
  13. AmmoJammo

    What amp do I need.

    He's laughing at you though :)
  14. AmmoJammo

    What amp do I need.

    its magic!
  15. AmmoJammo

    What amp do I need.

    exactly :spot on:
  16. AmmoJammo

    What amp do I need.

    the amp isn't going to do anywhere near 3000watts, even with a 0.5ohm resistor on it, with no impedance rise.
  17. AmmoJammo

    What amp do I need.

    A 1500 watt amp does 1500watts, there are two subs? I find it amusing that you're more worried about the subs handing the power than you are about the amp being run at 0.5ohm :rofl2:
  18. AmmoJammo

    What amp do I need.

    still on the drugs :/
  19. AmmoJammo

    What amp do I need.

    10x their recommended power? I assume you're on drugs...
  20. AmmoJammo

    New setup advice before i buy

    :blah blah:
  21. AmmoJammo

    What amp do I need.

    He shouldn't run it at 0.5ohm in the sealed box ;)
  22. AmmoJammo

    New setup advice before i buy

    ...in your opinion... which we already know doesn't hold any credit :)
  23. AmmoJammo

    What amp do I need.

    Do you understand impedance rise? and as I said, this is based on experience...
  24. AmmoJammo

    New setup advice before i buy

    Lol, you mean a manufacturer stretching the truth? who would have thought!
  25. AmmoJammo

    What amp do I need.

    I made my recommendation based on experience, I can only assume you're disagreeing with it based on self proclaimed expertise, and not much else.
  26. AmmoJammo

    New setup advice before i buy

    You mean its your opinion that I'm wrong... I'm not wrong :)
  27. AmmoJammo

    What amp do I need.

    So what's your reasoning for not doing it?
  28. AmmoJammo

    What amp do I need.

    because you're an expert? lol
  29. AmmoJammo

    New setup advice before i buy

    Yes, that's why I said it... lol If you want to reduce road noise, you need to use something like "Dynaliner" not a butyl rubber based deadener... Deadener isn't designed as an acoustic barrier. Not that the guy was asking how to reduce road noise anyway!
  30. AmmoJammo

    New setup advice before i buy

    Sound deadening isn't for reducing road noise :blah blah:
  31. AmmoJammo

    New setup advice before i buy

    No, if you want to suggest someone waste money pointlessly sound deadening the floor, then go for it... lol
  32. AmmoJammo

    New setup advice before i buy

    :blah blah:
  33. AmmoJammo

    New setup advice before i buy

    Sound deadening is for eliminating rattles, not stopping external noise from entering the vehicle. I'd deaden the front doors, boot lid, and parcel shelf to begin with. Deaden the outer "skin" of the front doors, then seal all the "service" holes in the front doors with painted MDF or acrylic...
  34. AmmoJammo

    What amp do I need.

    That amp will be fine, the issue is, you won't hear, or smell the subs being pushed beyond their limits in that small sealed box. You probably get away with running the amp at 0.5ohm daily, and give the subs a decent amount of power, but, as I said, not in that prefab box.
  35. AmmoJammo

    What amp do I need.

    How do you know? he hasn't given model numbers for anything... his current amp might do 400watts into 2ohm.
  36. AmmoJammo

    What amp do I need.

    If you dont connect the two middle terminals together, you won't get any noise from the subs :/ As for whether or not the 800watt Pioneer monoblock you've been offered is suitable or not, we really can't say without knowing the model number, as it may do 800watts at 1ohm, which means you won't...
  37. AmmoJammo

    What amp do I need.

    Is this meant to be a joke? that isn't even the same box and subs you posted a pic of in the first post :/
  38. AmmoJammo

    What amp do I need.

    Remove the subs and see how they're wired... They won't be dual voice coil... none of them were :p but it would be worth while knowing how the terminals are wired ;) and take some pics!
  39. AmmoJammo

    What amp do I need.

    I assume he was talking about the Pioneer monoblock ;)
  40. AmmoJammo

    What amp do I need.

    Over 9000! *walks away*
Top