Search results

its all done and sounds awesome! cant take anypics today tho cos the weather is so bad, no light at all! i also realised that my account isnt counting the amount of thread comments/replies im making and how many threads i start?? means i cant post anything in the sales thread cos i really need...

yeah mate thats the exact sub! im booked in for install tomorrow, i just got paid so im willing to let the pros do it for a little bit extra cost. should sound realy good when its done. thanks everyone for your help :)

ok cool, im getting a 12" MOMO in a custom ported box which the installer is constructing for me to suit my car and amp. i like good SQ but also like loudness so SPL is important too. so the box is getting tuned so that i get a good mix and compromise between both SQ and SPL. hopefully il have a...

!! thats the exact sub range he is quoting me on!! the Polk MOMO MM sub that has dual 4 ohm voil coils!! what do you think? do they output good sound? what amp are you using to power your sub? they seem pretty slim to me, but they are not classified as slim subs. apparently Polk used some...

sorry, Polk MOMO not mono haha, typo :p

hey audio guys and girls. does anyone know if Polk Mono Subs are anygood? i got a quote from an installer and he is going to custom build a box for my car around a 425watt rms dual coil 4 ohm Polk Mono Sub. my amp is capable of 400watts rms at 2 ohm. he is quoting me 500 for the sub, box...

sorry mate cant help you out. you are best starting your own thread in the audio section.

awesome! thanks for all the help. cant wait to get my sound system finished :D

ok so cliping is when you push your amp to hard and **** happens pretty much :p thanks for that info. im leaning toward a ported box cos i really want to make the most out of the sub. so playing this sub at 2 ohms 400rms will be fine cos its rated at 100-500rms single 2 ohms. i found this page...

ok cool, so that single 2ohm 12" JL sub is a good fit for my amp then? well im a mutt wen it comes to music haha. i listen to all kinda of music from heavy rock, dance, electronic, hip/hop, rap and anything with nice bass tones to show off the sub :p would you recomend ported or sealed? and...

yeah the above sub is also available on soundmaster and its power specs would mean i have 100rms at 2 ohms worth of head room cos i really dont want to risk blowing my sub. will 400rms at 2 ohms give good kick aswell as fill my car with clean bass?? i plan on getting a box custom made, the...

just realised that website doesnt ship to AUS :( damn it! even though, i found this sub, what do you think? JL Audio 12W3v3-2 W3v3 Series 12" 2-ohm subwoofer at Crutchfield Signature they have this same one on that AUS website (soundmaster)

yeah i saw that one but because it is a D4 sub wouldnt that mean i would be over powering it but 100 rms @ 2 ohm? and yeah, its all about rms, not this stupid peak power bs haha. which jl sub are you talking about, this one? Sound Master Car Audio - ($787) JL Audio 12W6V2 12inch Subwoofer 12W6V2...

thanks for that. i think im getting the hang of this dual and single ohm stuff. i had a look on this website where i bought all my speakers and amp from, here are a few links to subs that i think fit well with my amp. let me know what you think of these subs, brands, quality, etc.. and if you...

thanks for all the help guys. do you recomend going for the single input subs (single 4 ohm/2 ohm) or the dual input subs (dual 4 ohm in my case so i can achieve 400rms @ 2ohm) i would like to make the most out of the amp becasue i did spend a fair bit. im not sure about what sub i actualy want...

hey guys and girls, i am kitting out my VY S II with new sound :D i have just installed JL front splits and JL rear 2 ways all powered off a JL 5ch amp. the speakers run great but this is where my knowledge ends :( i have the 5th ch on my amp still to play with. its a sub output (mono) and can...

GOLD! where?!? ima go and dig up some more threads :P

if you want pics PM me your email, its easier for me haha. if you look at the above ute the top of my tyre is just tucked under the gaurd, where as the ute above preety much the whole top of the tyre is hidden. if you go as low as the above pic you wont be road worthy and if your in an accident...

if your going SL then you shouldnt have any issues with wheels touching anything. im assuming your wheels are 8" wide which will clear the wheel arch no problem at all, unless you have some crazy huge 12" wide wheels or something haha. my car has 18x8" SSz wheels and has been lowered to lowest...

the factory HU is only good for being a resting point for dust in my garage. switched it out with an alpine unit and my god was the sound quality and loudness improved. and this is still with the stock speakers. switch those out and you will have amazing audio quality :)

check out Sound Master Car Audio - Best prices on Car Audio, Alarms and Accessories they are based in sydney and they kill the prices that you will find at JB HIFI. i spent alittle more than 200 on my front splits, they are JL Audio c2-600 i think. they are going in the car on saturday :) i...

i just put a set of 18" SSz wheels on my VY S and wanted that gap filled aswell. went to pedders suspesion and they dropped my car to lowest legal (i think my car sits at 105mm from the ground) 4 new springs, full wheel alignment set me back $590 very happy with it. i had a small issue with the...

not sure of the % for darkes legal in vic, might be 25%, not sure. good place to go in melb is Tint Professor. $295 for full sedan tinting (not including front windsheild becasue thats illegal) and it comes with a life time warranty. i was told if any bubbles form all you need to do is take the...

****, sorry mate. completly forgot to tell you. i did some research and found that i had to buy some crazy looking cable with an aux addaptor on it so i decided to just buy a new headunit. very sorry for not letting you know.

well i have been doing ALOT of research into car audio because i am in the process of a complete upgrade. came across this amazing website: Sound Master Car Audio - Best prices on Car Audio, Alarms and Accessories they are australian and based in syd so postage is cheap, im talking no more that...

i have heard that sometimes that little metal nipple next the the T bar of the key doesnt make good contact with the metal ring around the ignition when you insert and turn the key, and this will cause your car to not start? i think its meant to be a safety feature to make it harder for people...

so, any interest in my wheels mate?

hey, i just sent you some more pics of my wheels for sale, sent them to your hotmail that you gave me. cheers

yeah i can get you some pics no probs. just PM me a prefered email and il send them as an attachment.

17" VY S series 2 alloys, full set (4) brand new rubber, still has the knobly bits on it haha so you could call it high 90's%. all wheels are in really good condition except for minor rash on the very edge of the wheels (small amount on each rim). rash is just paint scrubing, no damage to the...

thanks for the PM mate, i went to reply but i got a msg saying that your inbox is full or something?? il just post it in here. my reply to your PM: ok cool, thanks for the info. i like the sound of the headunit, i was hoping that it had 3 preouts cos i am possibly planning for a full stereo...

seeing as you drive a car with stock front plits, why not upgrade the whole front speaker package while you are at it? the type R front splits arent to much more and you will get much nicer and cleaner sounding hi's from your speakers, as well as hearing an improvement in your mid and lows?

hey im pretty keen on this headunit, pm me the specs if you can please. thanks

hey mate, seeing as you still have the boxes for everything, do you mind emailing/pm-ing me the exact specs on the headunit, amp, and splits. atm im very interested in the headunit, and splits if you still have them for sale? thanks

its only 5mm but its so annoying! if i got it dont by professionals i expect it to be done right. how did they fix yours? and i heard from a friend that it could be a rotated spring but it shouldnt happen in the first place?

thats what im going to do, but i was just wondering if this is common, what it could be, can it be prevented?

hey guys and girls, i drive a VY S II and just had my car lowered (professional, not DIY) and 2 weeks later i have noticed that it now sits un-even. the left rear is lower than the right rear?? i can only just squeez my hand between the gaurd and the trye on the left rear (how i want it) but on...

i have a VY S II and just had my car lowered, not to extreme. i can still fit my hand between the rear gaurd and the top of the trye.. just :P. and i have kept my stock shocks and i havnt had any problems with feeling every little imperfection on the road, drives really smooth and best of all, i...

i have a set of four VY S II 17'' rims, very little gutter rash, no damage to the alloy itself just lost a tiny bit of paint on the very edge of the lip on a couple of wheels, no scratches at all on the face of the wheels factory silver paint is like new on the faces of the rim. band new tyres...

yeah i went in there and they said for an average quality full system he can do it for 850ish, but instalation was 450. im not paying some guy 450 for install :/