Search results

No they have made it worse. The VT had a camber kit available to fix the camber problem in the the rear end of the car. The VY however they have put additional toe adjustments in the VY which makes a camber kit useless because the ones for the VT/VX arent strong enough for the VY Commodores

i have a problem with my VY Series 1 Executive. When i put my foot on the brake when the car is off the Instrument Cluster lights up and if the light switch is on parkers or something the rest of the dash will light up to, but it doesnt light up the parkers or other outside lights I first...

sorry guys there sold now

rather sell them together

Strathpine, Queensland

F/S Autometer Air/fuel Ratio & Oil Press -------------------------------------------------------------------------------- i have two autometer gauges for sale they are 52mm in diameter. Both are the ultra-lite series. Both include fitting instructions. THe oil pressure gauge is back...

where did u buy them from can find them on the net and wot kinda costs were they???

i know this has probably been asked and asked and asked, but i am going to ask again and seek advise. I have 245/35 r19 on my my car and i need to replace the back tyres. i have been quoted on Nankang Ns2 's for my car but my mechanic reckons nankang aint a good brand, but the quote i got...

so does it light up like the cluster, where the numbers are illmuniated or do the whole face light up??? Its not hard to install them i did them myself with the oil pressure its just a matter of running the wire and attaching the oil pressure sender to the car not hard just fiddly. as for...

they look good cause they match your instrument cluster

i have just installed my Binnicle into the car. i bought it second hand with two autometer gauges in them, but i dont like the look ofthe way they light up. i want a set of gauges that have a white face and when lit up they light up white, so it matches my instrument cluster. So my...

i got the oil pressure one working fine, got the sender and the 'T' piece from repco and autobarn today. Thanks For your help juzsvy and Dr Bob. i followed the picture diagram that i got from dr bob to try and hook up the fuel/air ratio meter to d4(purple) today and the gauge didnt work...

can you buy the sender seperately cause i didnt get one with this one???

ok cool, thanks for your help

so the pressure sensor in the car is useless for after market gauges???

i have got two autometer gauges cant you use the nolden senders with them???

doesnt the original one work with after market gauges

after market

no its a fuel/oxygen ratio, it tells me if the car is running lean or rich, it is hooked up to the oxygen sensors on the exhaust so i need to know the oxygen sensor on the exhuast pin off the pcm and the oil pressure sensor pin out of the pcm

i am trying to hook up two gauges into the Binnicle in my car, the two gauges i was supplied with is a Fuel/oxygen Gauge and a OIl pressure. I am just wondering which wires off the pcm i i need to splice into to make it work??? Thanks Brett

where are you cause it aint that hard to do, im sure for a carton of cold ones someone in the forums will help you to install it

This is Real Rice You guys havent seen real ricer until you have checked out this site http://www.topgear.com/content/timetoburn/sections/carbage/pages/0504/

Just saw Craig Lowndes on Sports Tonight, to cut his interview short it was, if Rick didnt tap me and spin me round i would have won the race and the championships. What would happen if it was the other way round. lowndes would be all smug about it and say accidents happen in the races The...

This is the negative camber that i have on the back of my car and there is nothing, atm, i can do about it, until they develop one that is strong enough to work on my car. and the second picture is my tyre. and yes i need new ones, but they grip really well in the dry :dance: . but in the wet...

hey michaelw, do you make and sell these cables at all???? If so how much???

agree'd because you would have to make something from scratch, wheres its easier to modify the gps surround down the bottom

You cant install one, that wont be strong enough or that wont do damage

my ride MY VY Series 1 Executive Current Mods: 19" Advanti Rims Pioneer in dash LCD Screen, TV and 6 Stack DVD LCD mounted in rear of centre console Clubsport Bodykit Lowered an inch with King Springs Front Strut Cross brace(handles like a dream) White HSV Instrutment...

buy a ford cause they have that in there luxury models

you can lower the car an inch to and inch and a half, but you will get negative camber and the commodores on the rear do not have camber adjustments only toe adjustments, which means that you will have uneven tear wear. http://forums.justcommodores.com.au/showthread.php?t=46705 My...

they are in behind the lcd screen on the dash, when the car turns on the screen comes out and i can retract it by a push of a button. they are still there

what size screen is that down there in that hole cause thats where i wanna put the computer screen

no it does move around at all it stays pretty firm in the dash

i have installed into my car a Pioneer LCD screen into the dashboard and have just finish customizing the end of the centre console to fit in the rear lcd screen. Now for my next project i am looking to fit a screen LCD with VGA and touchscreen just under the pioneer one in the dash, in the...

i bought a Monaro LVL 3 in the hothouse green and i want to change it to a Black calais/ berlina one or the White HSV coloured facia. DOes any body know who i can call to swap or buy the coloured facia at all.

I have got a VY Monaro LVL 3 Hot House Green. Does any one wanna trade the Green insert for a Black or White one??? Click to See Image Click above to see the green insert cheers

I know this has been discussed here before and i think i have even posted a thread about this to. i have a VY Series 1 Executive, it has been lowered an inch, and it has 19" rims. My tires wear heaps faster then the outside of the rear tyres because i have to much negative camber on the car...

i got my power windows all hooked up and it works well, i got the BCM from a wreckers for 125 with key head and i bought two more key heads off ebay for 35 and holden charged me $43 to swap and program the bcm and keys, if your wanting to do it the holden way then follow cobras diagram on his...

Have a look at this http://www.youtube.com/watch?v=YnDhCdrj2sU http://www.youtube.com/watch?v=iXKzc4Jc6Rg&NR

thats wot i thought some guy on ebay is selling a used key and he stated that it can be programmed to suit the car