Search results

I have a sportwagon so not sure if it's the same but basically where the mirror is in terms of location on the door there should be a black plastic (thats what is is on mine) I take my door trim off because I stabbed the **** out of one of them by slipping because of those stupid clips they use...

I've got myself an ODBII scanner and it's actually paid for it's self but I got a check engine light the other day out of the blue and when I hooked it up it said P0420 Catalyst System Low Efficiency Bank 1. Now this car is only 2 years old and done 55k on the odometer and I think it's strange...

Alot of people make the mistake of when grounding to the chassis that they can just sort of scratch the paint until you see a little bit of metal. I was always under the impression that the would create noise if it wasn't touching it 100% with full contact. So thats probably why when you...

In my VE I had the same problem, fiddled with a few wires and ended up actually re running the 12volt in glove box and the AUX port wire with some better quality stuff, still with the same issue. Then we ran a new ground cable from the head unit to chassis and that cleared it up. Not sure what...

The stock headunit does a maximum of 25 watt RMS from memory and a max (peak) of 35, I still have the stock speakers and their specs in the shed somewhere. As for Fusion, I don't know if its just me and I don't want to sound judgemental but I don't like it, just doesn't have the depth and...

Thanks for your reply man. I play my music through an iPad mounted to my dash via Bluetooth, I can use AUX and USB iPod integration and I still get the same noise. Thanks for the suggestion though

Thanks for your reply. I just find it hard to believe about the wires because I've moved them from power leads, I've rerun the WHOLE car with new wires and yeah like I said soldered and wrapped the splits. I'll do what you said and let you know, I'm starting to think it's the line output...

Me and my mate wired up all new door speakers Hertz HSK-165's all round put all the amps in the spare tire well, split the rear door speakers and the front door speakers to a Line-output converter LC2i by Audiocontrol. Now I get this crackling noise when I go over bumps, but it's only on the...

Just wondering, do you know of any iPad HVAC kit in development? I could easily use these air conditioning control it's just I'll loose loss of reverse camera etc if I completely remove factory head unit. But I do have a series II does this work with that yeT?

I'm deffs going to lower it, and my dad is taking these rims for his Omega so I have to get new ones. He did pay for the car so I can't really complain. Just wondering if theres any that look especially good.

I have a problem, I cannot decide what rims would look nice on my 2011 SV6 Series II Sportswagon. Heres a picture to help: MUST BE 20's Thanks :) :) p.s It's Heron white for people who are 56k :)

Hmm, the only real issue with this is the HVAC. I'm not sure if the Folcik ones are compatible as noone has tried it yet, I talked to the manufacturer and he didn't know. Hmmm

I've been wondering, is it possible at all to intergrate an iPad into the IQ system so I can replace the stock headunit with an iPad. I haven't seen it done before. If I changed the headunit what functionality would I loose.

Guys got it all setup thanks for the helpful comments :) I used Brown wire under dash for remote :) and I put a 150A fuse between the battery and amp.

I did this for my party recently. I had a JVC headunit from a home theatre system and it had a high level speaker output so I just put that into my amp which had high level inputs and connected an old car battery to a car charger set on high. Lasted around 6 hours and the battery never went...

I just installed my dual subwoofer into my 2011 Series II. You'll need to buy a line output converter, I bought the LC2i it's good and I get no interference. I tapped into the rear speaker wires by taking off the plastic covering next to the front seat infront of the metal grate thing when you...

Just started my audio system for my car going to continue once I have the money. Subwoofer = Rockford Fosgate P3-2X12 Amp = HiFonics Brutuz BRZ1200.1d

Thanks for all the help guys I'll definitely put a fuse between the amp and battery. Just wondering what wire I need to connect to the remote port on my amp now Thanks, Jamie

Hey guys, first post here so hopefully I get some results :) I've bought a P3-2X12 Rockford Fosgate loaded enclosure. It's 2400 watt max and 1200 watt RMS @ 1ohm internally parallel. I have a Hifonic BRZ 1.1200 for the amp which runs stable 1ohm. The car is a 2011 SV6 Series II...

Hey guys this is my first post here as I've just bought my new car, well my parents did for my 18th. I'm just wondering the stock alloys that come with the car are 18"x8.0 is there any chance I could fit a pair of Verde Black Ice 20"x8.5 on there without having the roll the guards? Any...