Search results

Temp gauge isn't doing anything when it plays up. Ill have a look into people's suggestions. Thanks guys ill keep you all posted how things go. I haven't had a chance to do the fuel filter yet Cheers guys.

Ill do the filter over the weekend and ill look into the fuel pressure. No smoke that I have noticed. I thought it may have been a blocked injector so I mixed some injector cleaner with the fuel. It hasn't helped.

Battery voltage was ok, had that checked. What's the best way to check fuel pressure? I was thinking of Changeing the fuel filter to see if that help.. Needs doing anyway.

Hi guys im hoping someone can help, im having trouble on start up and idle if the car sits around for more then a hour or so.. it takes a few extra cranks for it to spark into life then it use to, even when it dose its like there is only just enough fuel getting there. After it starts it...

Hi guys I have a squeak and a ticking noise comeing from the front drivers side wheel. The faster I go the faster the noise becomes. I had the pads changed and rotors Machined about a 3months ago and have had the noise ever since. The noise goes away when I brake so I imagen it has something...

Hey mate, are the springs still for sale?

Hey guys, just got a 2nd hand one from the wreckers cost $45 and it all works agen. Thanks for the replys :) cheers

I had a look on eBay, can't find any VR/VS ones. :aussie4life11: I wouldn't know where to start with rewireing one lol

Just spoke to Holden, they stopped making them in 2005. Of to the wreckers then lol

Hey guys.. Any one know if you can still get new Fan Speed Resistor for a VR?? Or they just 2nd hands these days??

Yeah with a hammer. They fit it fine now. 235 would be better but if you need the load rateing.... I think there are 10mm spacers you can get but I'm not sure of legal/illegal. The off set of the rim mite make a diff as well.

I have a VR with 245/35 19". It has Fe2 (lows) springs in it atm. The rear clear all round but in the front the side wall of the tyre just hit the strut by about 2mm. I just dinted the strut that 2mm so it would clear. Other then that they where good.

Thanks guys I'll have to pull the speed resistor out this weekend. Ill have a look at the "how to" as well. I haven't changed the thermostat, I'm not sure what the HVAC is so I'm don't know lol I replaced the radiator and I think it's the heater tap with a 2nd hand one a mate had (it leaks a...

Hey guys The heater dosent seam to get "hot" anymore at most it really only gets warm. Any ideas what could be the problem? Also the heating/cooling fan switch only works on no.3&4. I thinks there's a module that controls it(think it's called the fan speed resistor ) Dose anyone if that's...

Anyone know if you need to change the front struts to fit 19" rims with 235/35 tyres or 20" rims with225/35 tyres. ??

Hi guys I'm looking at getting 19" rims maybe 20" and just wanted to know if they will fit under the stock struts or will I need to buy new ones. Eg Monroe struts The car has super lows all round so if I went 20"s would I have to roll the gaurds etc etc Any advice would be great Cheers.

Hey guys. Im looking for a good car polish for my car (white car). I normal use auto gem polish, but the car still ends up with some cloudy dull spots over it that I just cant seem to get out. Manly on the roof boot lid and bonnit Not sure if I should use a clay block or some sort of paint...

^^ thought i would update where i was at... found a bad negative at the back of the light switch, we didnt realise but there seams to be two of them for some reason. so we bypassed the one with the bad reading and got the lights working. ill fix it up tomorrow as we ran out of light. Also...

hey guys Thanks for all the input... im not to worryed about legal or illegal. it have IRS and is a V8 the main look im going for is to have the car sit level i had the tape out yesterday and did some measurments, wheel size, how far up the guard F&R also how far they should/could...

Hi guys My head light and dash lights have stopped working for no real reason. for a few weeks some of the dash lights have stopped working but 95% of them worked. not sure if this has anything to do with it... high beam works when i pull it indicator stick back. All fuses, relays and...

hey guys ive been reading the forums alot trying to find out about what size to put on my VR SS im torn between super and ultra low kings springs. it has FE2 in the car atm so i imagen the supers will only drop it about 20mm so probs go ultra and puting 19' rims on it. just hope its not to...