Pub247
Well-Known Member
- Joined
- Apr 14, 2006
- Messages
- 3,372
- Reaction score
- 59
- Points
- 48
- Location
- Melbourne S.E.
- Members Ride
- Ford Fairmont
ITEM: VT Series LSD Cebter out of VT clubsport suit VT -vz maybe ve borgwarner 80 series 28 spline diffs
LOCATION: Victoria melbourne South East near dandenong
CONDITION: Used recently reconditioned
PRICE: $250 Negotiable
DELIVERY/PICK UP INFORMATION: pick up only may courier at your expense
PAYMENT OPTIONS: Cash or direct debit
CONTACT DETAILS: PM, Post
OTHER INFO: LSD Center i bought for my VN does not fit my diff I bought it off my mate who has a vt clubby s1 and was recoed 6-8months before being removed for fitmant of a kaaz center.
As i know the guy i can garuantee its never been driven sidways which it the main cause for lsd wear. From a car that does not get flogged so it should still be very tight. Cost him $600 to reco.
Note one of the carrier bearings needs replacing (should be replaced anyway) as i was was it had been heated to remove the carrier (dont ask why that what i was told by the people who fitted the kaaz)
Also comes with stock 3.07 gears also have 3.9 gears i will consider throwing in for another 100
will suit any vt onwards diff possibly not s1 even though it was removed from a series one (hsv might be possible reason)
PICTURES:
One can be found here:-
http://forums.justcommodores.com.au/857724-post30.html
and i took one of the stuffed bearing
LOCATION: Victoria melbourne South East near dandenong
CONDITION: Used recently reconditioned
PRICE: $250 Negotiable
DELIVERY/PICK UP INFORMATION: pick up only may courier at your expense
PAYMENT OPTIONS: Cash or direct debit
CONTACT DETAILS: PM, Post
OTHER INFO: LSD Center i bought for my VN does not fit my diff I bought it off my mate who has a vt clubby s1 and was recoed 6-8months before being removed for fitmant of a kaaz center.
As i know the guy i can garuantee its never been driven sidways which it the main cause for lsd wear. From a car that does not get flogged so it should still be very tight. Cost him $600 to reco.
Note one of the carrier bearings needs replacing (should be replaced anyway) as i was was it had been heated to remove the carrier (dont ask why that what i was told by the people who fitted the kaaz)
Also comes with stock 3.07 gears also have 3.9 gears i will consider throwing in for another 100
will suit any vt onwards diff possibly not s1 even though it was removed from a series one (hsv might be possible reason)
PICTURES:
One can be found here:-
http://forums.justcommodores.com.au/857724-post30.html
and i took one of the stuffed bearing
Attachments
Last edited: