varajet

Hey, I have a 4 cyl star fire with a varajet 2 carby that has just been rebuilt. Just chasing a diagram that shows where this bloody choke link goes or even some experience to tell me where it connects cheers!

Varajet 2 on an '83VH. Basically, when the engine/choke cools down, it can't close because the teeth on that plate stops it from lowering. Of course it can open OK, because the plate moves up and the screw just slides down the teeth. Only way for it to close is if I pump the gas, which take the...

UPDATE (22/01/17 12:30PM) - skip to here to see what's been eliminated so far.- UPDATE (23/01/17 19:10) - Solved. Got a stock 83 VH blue 202 (Varajet II carb.) Have done a full carby clean (but not rebuild) and replaced mount gaskets recently (to fix a vacuum leak), had a run through of...

Hi Was looking under the bonnet of my commodore trying to find what caused it to idle a little fast sometimes, and found it to be a little vacuum operated stop thing not retracting properly. Its up the back near the choke and is mounted on a bracket that bolts onto the carbie using the two...

Hi My name is Andy and I need to understand a bit more about the Varajet II carbie that is on my VH standard strait 6 blue motor. I need to find out about the idle screw and the mixture screw. Need points like how to locate them, which screw is which and how the mixture works etc. Any...