vs - vt

Wondering if there’s anyway to get a vs front onto a vx berlina. Front cut and weld?

Curious what anyone's opinion is on this vehicle. It seems relatively cheap and I love the look of these old Utes. If its only the spark plugs and leads that need to be done I think it might be a bargain. https://www.carsales.com.au/cars/details/1998-holden-commodore-vs-ii-auto/SSE-AD-6417377/?Cr=0

I have a 95 VS SS Manual Sedan have owned for 12 years and just about replaced everything. But now I have an issue that I can't seem to figure out. So the symptoms first. The car sometimes starts and idle fine but it's 50/50, if it doesn't start it just keeps cracking over but doesn't fire. If...

Hi, First post, wanted some ideas on what could be the issue. Symptoms Fault is intermittent, car won’t start sometimes Turn the key to start and it clicks once. Car: 1996 Holden Berlina V6 auto What I’ve done. Charged battery, it started, used multimeter to test alternator was charging...

Hey guys, I’ve got a 1996 vs Commodore ute with a 3.8l 6 cylinder and the clutch pedal sits about an inch from the floor and is an inch lower then the break pedal, it feels fine driving with the clutch, i’d just rather it was the same height as the break pedal as it’s easy to stall, how do I...

VS III V8 Ute stuck in first and reverse sometimes with the clutch engaged. Will creep unless i have my foot on the brake. If im in traffic and cant take off only option is to stop, turn off the ignition, Double the clutch which will release shifter from gear and start again. Usually in first...

Hi, i have a VS ute manual (getrag 260) onto the v6, ive owned the car for nearly a week and ive notices that the car is either spinning the wheels like crazy or some crazy clutch slip. heres my evidence, please help! - the LSD is rooted and could just be spinning one wheel? - the speedo...

I have a l67 VTS11 and a VS Exec ecotec wagon. Both Autos. Am wanting to swap over engines and wanting some advice. Most importantly is I want the l67 in the VS. the VT can sit for a while. I've found a bit of info on an ecotec VT-VX into VS but leaves a few gaps. What do I need to change or...

I have 1997 VS Commodore Ute with 3.8 Ecotec and it idles rough, but it like idles like its cammed or shaking side to side not badly. But enough to notice any ideas on how to fix it?? feel free to comment anything that you think will help and any recommendations on a few things to help the old...

Hey guys just another post about swapping out my 3.8 and trans. I pulled out the motor and box in the shed a few weeks ago, and ive got myself a parts car now so im ready to rip this one out and chuck it in my good car. So im wanting to take motor, trans and also the lsd diff, and ive been told...

Hi all ive seen this has been discussed lots on here. But its still confusing Im really looking for straight foward info. Got complete vt front brake setup. Including new rotors. What do i need to do to install. As few people said straight foward swap, but then also been told need a smaller...